The subject of the work is the preparation and organization of construction multifunctional building in Brno. The content of this work is a technology report, time and financial plan of the building, the study of the main technological stages, the project construction site, design and dimensions of construction machinery, inspection and test plans for quality and technological regulation.

This thesis deals with the optimization of the structural design of large technology compounds. The main emphasis is placed on the participation of available optimization instruments in the design of supporting structures of these constructions. The introductory part is primarily focused on the optimization itself. In this part are further specified also used optimization methods, computational finite element method, implemented code checks and calculation of cost of construction. The main part is dedicated to application of optimization procedure for the design of steel supporting structure of the auxiliary technological object of thermal power plant. The objective criterium shall then constitute the total cost of construction works along with operating costs. For the solution is used Scia Engineer software together with optimization module Scia Engineer Optimization Toolbox. The whole analysis is presented comprehensively from the description of computational model to results evaluation. The attention is paid to the optimization task settings, technical solution of optimization, optimization methods deployment and during the calculation process (especially to the development of objective function values and desing constraints during the optimization solution).

The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.

In my diploma thesis the proposal is developed as supporting steel structure sports hall with dimensions 45 x 54 m, a maximum height of 15.5 meters,for the area of Znojmo. In a static calculation are designed and assessed the main bearing structural components such as solid panel purlins, spatial lattice truss, bracing and solid panel columns, which together with the truss form create a crosslinks, column bases and anchoring, plus Tribune.The work includes the design documentation consisting of a layout drawing, drawing anchoring and drawing selected details.

The aim of this thesis is to find the best option of the building technology for a house. The thesis is divided into two sections – theoretical and practical. The theoretical section consists of three parts. The first part deals with theory of costs and pricing. Second part specifies types of the budgeting used in Czech Republic and the last part is focused on description of the selected construction systems used for building a house. Second section deals with description and the layout of the house, for which three budgets are set with a respect to the used option of the construction system. Furthermore, a comparison of the technical parameters as well as the costs analysis according to the TSKP is made. Finally, the optimal variant is selected with respect to the price and technical properties.

The subject of the Diploma thesis is the technological project of the university campus in Brno - Bohunice. The work includes a complex study of the realizacion of the main technological steps in the construction of buildings UKB, namely the A25 and A36. There is the technical report, technology processes steel bearing system and monolithic reinforced concrete structures. Inspection and test plan for addressing regulations, timetable of works, machine draft report, and occupational health and safety plan

The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.

The aim of diploma thesis is design and assessment of bearing structure of viewing tower on the mountain Makyta in Javorníky, which is designed from timber and steel. The shape of construction is variable of its height. Diameter of octagonal platform at ground level is 12 m, in the middle of construction is 7,7 m and on the top of the construction is 8,7 m. Viewing tower has 5 viewing platforms – the highest one is covered by roof. Wooden elements are designed from glued-laminated GL24h timber, steel elements are designed from steel of S235 grade. Main support elements of structure are wooden rectangular outer columns and steel circle center column. Total height of construction is 31 m. Static analysis has been accomplished by student version of the SCIA Engineer 2014 software.

The main purpose of this work is a structural design of the building of theatre in Prerov city. The building has irregular shape. The structure is 72 m long, 54 m wide and 14,5 m high. Footprint equals to 2000 m2. Timber part of the building consists of glued laminated timber elements, as well as solid-sawn timber and steel ones. Steel part of the building includes tnasversal joint frames, composite steel and concrete ceilings, truss girders and bracings. This document includes design, internal force enumertion and structural assessment, including joints. Dlubal RFEM 5 structural analysis and design software has been utilized in the process. Drawings of the structure are enclosed.

Thesis deals with design of a steel structure of multi-storey office building. It is a six-storey steel structure of square plan with dimensions of 40 x 48 meters and height of 21,5 meters. Structural design report is made by a combination of manual calculations and calculations using software Scia engineer. Structural design report includes calculations of: truss girder, column, connection, bracing, beam, secondary beam and column anchorage. Thesis includes drawing documentation and report.