Energy harvesting using ferrofluid in OHP. Characterization of as-synthesized (bare) and surface-modified ferrofluid samples was performed using Fourier transform infrared spectroscopy, dynamic light scattering, X-ray powder diffraction, transmission electron microscopy, and atomic force microscopy. These ferrofluids were tested in a novel oscillating heat pipe set-up was utilized to harvest electricity, demonstrating the concept of ferrofluidic induction. Cobalterrite nanoparticles surface-modified with citric acid demonstrated good magnetic strengths and generated voltages close to those of the as-synthesized ferrofluids while maintaining dispersion. Surface modification of ferrous nanoparticles with SRP. Thermo responsive polymer poly(N-isopropylacrylamide) was successfully grown from the surface of cobalt-zinc ferrite nanoparticles. A dual responsive block copolymer, pH and thermo responsive comprised of poly(itaconic) acid and poly(N-isopropylacrylamide) was successfully polymerized from the surface of ferrous oxide nanoparticles. These composite having magnetic properties along with stimulus can be used in applications such as controlled drug delivery and similar biomedical applications.

Nanofabrication techniques produce materials with enhanced physicochemical properties through a combination of nanoscale roughness and the use of chemically diverse polymers which enable advanced applications in separation science (air/water purification), tissue engineering, and biosensing. Since the late 1990’s, electrospinning has been extensively studied and utilized to produce nano- to microfiber meshes with 3D porosity on the gram scale. By combining a high surface area to volume ratio and tunable surface chemistry, electrospinning is a facile platform for generating non-woven polymeric fibers for many biomedical and industrial applications. This thesis describes three applications of electrospun nano- and microfiber meshes spun from both commercially available and novel polymer systems for: 1) oil and water separation after an accidental oil spill; 2) ultraviolet light controlled protein and cell patterning throughout 3-dimensional nanofiber meshes; and 3) novel diagnostic platform by combining electrospun nanofiber meshes with solid state nanopores for enhanced single molecule nucleic acid and protein detection. Each application embodies the philosophy that electrospun materials have the potential to solve a wide variety of problems by simply tuning the physicochemical properties and mesh morphologies towards the design requirements for a specific problem. For example, to solve the problem of recovering crude oil after an oil spill while generating a minimal waste burden, a hydrophobic and biodegradable microfiber mesh was designed to repeatedly separate oil and water and naturally biodegrade after use. In order to solve the problem of spatiotemporal placement of cells within a 3-dimensional tissue engineering construct, an ultraviolet light activated mesh was designed to transition from hydrophobic (water impermeable) to hydrophilic (water permeable) upon exposure to ultraviolet light facilitating protein and cell patterning. Finally to address two problems with single molecule solid state nanopore biosensors, namely rapid nucleic acid translocation rates and limited protein identification capabilities, a new biosensor platform was developed based on two novel polymeric systems which were synthesized and electrospun into high surface area nanofiber mesh coatings. / 2018-02-17T00:00:00Z

Stimuli-responsive polymers and self-assembling peptides represent two classes of materials with interesting properties and great potential to be used as biomaterials. The conjugation of polymer with peptide offers a way to combine the controlled chemical, mechanical, and thermal properties of polymer with the functionality of designed bioactive group. Pure hybrid materials with the characteristics of individual components or systems containing hybrid materials became attractive for applications in drug delivery and tissue engineering. This work focused on systems where the thermo-responsive properties of a polymer were combined with the gelling properties of two different ionic-complementary peptides via conjugation. The prototypical thermo-responsive polymer poly(N-isopropylacrylamide) (PNIPAAm) was chosen due to its lower critical solution temperature (LCST) ~32°C being close to body temperature. Ionic-complementary oligo-peptides, containing the alternating hydrophobic/hydrophilic and charged/uncharged amino acids, phenylalanine (F), glutamic acid (E) and lysine (K), were selected as they are known to form β-sheet rich fibrillar networks at low concentrations. Two peptide sequences with different charge distribution were chosen: FEFEFKFK and FEFKFEFK which form self-supporting gels at ~17 and 10 mg ml-1 respectively. Polymer-peptide conjugates were used to confer self-assembling and thermo-responsive behaviour to the system.Thermo-responsive PNIPAAm-rich hydrogels were obtained by targeting different degrees of functionalisation of PNIPAAm with the self-assembling peptides. Two series of such systems were prepared by using either a thiol-modified FEFEFKFK or a thiol-modified FEFKFEFK peptide as the chain-transfer agent in the free radical polymerisation of NIPAAm. The resulting polymer/conjugate mixtures were studied by proton nuclear magnetic resonance (1H NMR). The polymer/conjugate ratios were calculated and showed that the conjugate fraction in the mixtures increased with increasing concentration of peptide used for the polymerisation. Static light scattering (SLS) and viscometry showed the aggregation of the polymer/conjugate mixtures presumably due to the presence of peptide. The values from gel permeation chromatography (GPC), which were mostly attributed to the unconjugated polymers, were higher than those obtained from 1H NMR and centrifugation for the conjugates. The polymer/conjugate mixtures formed self-supporting gels where the critical gelation concentration decreased with increasing conjugate content. Oscillatory rheology experiments confirmed gels had formed and revealed that their elastic modulus, G' varied from ~ 10 to 400 Pa depending on the sample. TEM and AFM studies proved the formation of β-sheet fibres of ~ 4.5 ± 1.5 nm in diameter. The PNIPAAm-rich hydrogels were also characterised by micro DSC to reveal their thermo-responsiveness and phase separation and showed the LCST at ~ 30°C. The results of the study showed that varying the peptide sequence did not have an effect on thermal, mechanical or morphological properties of the hydrogels. By exploiting the self-assembly of the ionic-complementary peptides, it was possible to create PNIPAAm-rich, thermo-responsive hydrogels with controllable properties.Further in the study pure PNIPAAm-FEFEFKFK conjugate was incorporated into the FEFEFKFK peptide matrix to create peptide-rich thermo-responsive composite gels. Two series of the composite gels were prepared by varying separately the peptide matrix and polymer-peptide conjugate concentration. Micro DSC measurements revealed an endothermic peak at ~ 30ºC characteristic of the LCST of PNIPAAm. Oscillatory rheology studies showed that the composite gels became stronger with increasing conjugate concentration (G' ~ 20 - 200 Pa). Network morphology was studied by SANS. Using contrast variation and contrast matching techniques it was possible to distinguish between the peptide fibres and the PNIPAAm chains. Below and above the LCST the scattering curves showed a q-1 behaviour which is typical of rod-like objects. TEM and AFM also proved the formation of fibres of ~4.0 ± 0.8 nm and ~4.5 ± 1 nm respectively. AFM studies showed that the fibres of the composite gels were decorated with polymer chains. The thermo-responsiveness and the gelation properties of these conjugate-based scaffolds have potential for use as drug delivery vehicles or tissue engineering scaffolds.

Yes / Amphiphilic diblock copolymers, poly(2-(diethylamino)ethyl methacrylate-co-2-(dimethylamino)ethyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate), P(DEAEMA-co-DMAEMA)-b-PDMAEMA with various amounts of DEAEMA have been synthesized by RAFT polymerization. Their micellization in water has been investigated by scattering measurements over a wide pH range. It appeared that the polymers self-assembled into pH sensitive star like micelles. For a given composition, when the pH is varied the extent of aggregation can be tuned reversibly by orders of magnitude. By varying the copolymer composition in the hydrophobic block, the onset and extent of aggregation were shifted with respect to pH. This class of diblock copolymer offers the possibility to select the range of stimuli-responsiveness that is useful for a given application, which can rarely be achieved with conventional diblock copolymers consisting of homopolymeric blocks. / European Science Foundation (ESF), Engineering and Physical Sciences Research Council (EPSRC), BP (Firm), Birmingham Science City, Advantage West Midlands (AWM), European Regional Development Fund (ERDF)

Yes / AB and ABA di- and triblock copolymers where A is the hydrophilic poly(oligoethylene glycol methacrylate) (POEGMA) block and B is a thermo-responsive sulfobetaine block [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (PDMAPS) were synthesised by aqueous RAFT polymerisation with narrow dispersity (ĐM ≤ 1.22), as judged by aqueous SEC analysis. The di- and triblock copolymers self-assembled in salt-free water to form micelles with a PDMAPS core and the self-assembly of these polymers was explored by SLS and TEM analysis. The micelles were shown, by DLS analysis, to undergo a micelle-to-unimer transition at a critical temperature, which was dependent upon the length of the POEGMA block. Increasing the length of the third, POEGMA, block decreased the temperature at which the micelle-to-unimer transition occurred as a result of the increased hydrophilicity of the polymer. The dissociation of the micelles was further studied by SLS and synchrotron SAXS. SAXS analysis revealed that the micelle dissociation began at temperatures below that indicated by DLS analysis and that both micelles and unimers coexist. This highlights the importance of using multiple complementary techniques in the analysis of self-assembled structures. In addition the micelle-to-unimer morphology transition was employed to encapsulate and release a hydrophobic dye, Nile Red, as shown by fluorescence spectroscopy. / Engineering and Physical Sciences Research Council (EPSRC), University of Warwick

Conventional therapeutic techniques treat the patient by delivering a biotherapeutic to the entire body rather than the target tissue. In the case of chemotherapy, the biotherapeutic is a drug that kills healthy and diseased cells indiscriminately which can lead to undesirable side effects. With targeted delivery, biotherapeutics can be delivered directly to the diseased tissue significantly reducing exposure to otherwise healthy tissue. Typical composite delivery devices are minimally composed of a stimuli responsive polymer, such as poly(N-isopropylacrylamide), allowing for triggered release when heated beyond approximately 32 °C, and magnetic nanoparticles which enable targeting as well as provide a mechanism for stimulus upon alternating magnetic field heating. Although more traditional methods, such as emulsion polymerization, have been used to realize these composite devices, the synthesis is problematic. Poisonous surfactants that are necessary to prevent agglomeration must be removed from the finished polymer, increasing the time and cost of the process. This study seeks to further explore non-toxic, biocompatible, non-residual, photochemical methods of creating stimuli responsive nanogels to advance the targeted biotherapeutic delivery field. Ultraviolet photopolymerization promises to be more efficient, while ensuring safety by using only biocompatible substances. The reactants selected for nanogel fabrication were N-isopropylacrylamide as monomer, methylene bisacrylamide as cross-linker, and Irgacure 2959 as ultraviolet photo-initiator. The superparamagnetic nanoparticles for encapsulation were approximately 10 nm in diameter and composed of magnetite to enable remote delivery and enhanced triggered release properties. Early investigations into the interactions of the polymer and nanoparticles employ a pioneering experimental setup, which allows for coincident turbidimetry and alternating magnetic field heating of an aqueous solution containing both materials. Herein, a low-cost, scalable, and rapid, custom ultraviolet photo-reactor with in-situ, spectroscopic monitoring system is used to observe the synthesis as the sample undergoes photopolymerization. This method also allows in-situ encapsulation of the magnetic nanoparticles simplifying the process. Size characterization of the resulting nanogels was performed by Transmission Electron Microscopy revealing size-tunable nanogel spheres between 50 and 800 nm by varying the ratio and concentration of the reactants. Nano-Tracking Analysis indicates that the nanogels exhibit minimal agglomeration as well as provides a temperature-dependent particle size distribution. Optical characterization utilized Fourier Transform Infrared and Ultraviolet Spectroscopy to confirm successful polymerization. When samples of the nanogels encapsulating magnetic nanoparticles were subjected to an alternating magnetic field a temperature increase was observed indicating that triggered release is possible. Furthermore, a model, based on linear response theory that innovatively utilizes size distribution data, is presented to explain alternating magnetic field heating results. The results presented here will advance targeted biotherapeutic delivery and have a wide range of applications in medical sciences like oncology, gene delivery, cardiology and endocrinology.

Artificial lipid bilayers formed on solid surface supports are widespread model systems to study physical, chemical, as well as biological aspects of cell membranes and fundamental interfacial interactions. The approach to use a thin polymer film representing a cushion for lipid bilayers prevents incorporated membrane proteins from pinning to the support and mimics the native environment of a lipid bilayer in certain aspects of the extracellular matrix and intracellular structures. A key component for cell anchorage to extracellular fibronectin is the transmembrane adhesion receptor alpha(5)beta(1) integrin. Its transport dynamics and clustering behavior plays a major role in the assembly of focal adhesions, which mediate mechanical forces and biochemical signals of cells with their surrounding. The system investigated herein is envisioned to use extrinsically controlled stimuli-responsive polymer cushions to tune the frictional drag between polymer cushion and mobile membranes with incorporated integrins to actively regulate lipid membrane characteristics. To attain this goal, a temperature- and pH-responsive polymer based on poly(N-isopropylacrylamide) copolymers containing varying amounts of carboxyl-group-terminated comonomers at different aliphatic spacer lengths (PNIPAAm-co-carboxyAAM) was surface-grafted to a poly(glycidyl methacrylate) anchorage layer. The swelling transitions were characterized using atomic force microscopy, ellipsometry and quartz crystal microbalance with dissipation monitoring (QCM-D) and found to be tunable over a wide range of temperature and pH. In agreement with the behavior of the polymers in solution, longer alkyl spacers decreased the phase transition temperature T(P) and higher contents of carboxylic acid terminated comonomers increased T(P) at alkaline conditions and decreased T(P) at acidic conditions. Remarkably, the point where the degree of carboxyl group deprotonation balances the T(P)-lowering effect of the alkyl spacer was distinctive for each alkyl spacer length. These findings illustrate how the local and global balance of hydrophilic and hydrophobic interactions along the copolymer chain allows to adjust the swelling transition to temperatures below, comparable, or above those observed for PNIPAAm homopolymers. Additionally, it could be shown that surface-grafting leads to a decrease in T(P) for PNIPAAm homopolymers (7°C) and copolymers (5°C - 10°C). The main reason is the increase in local polymer concentration of the swollen film constrained by dense surface anchorage in comparison to the behavior of dilute free chains in solution. In accordance with the Flory-Huggins theory, T(P) decreases with increasing concentration up to the critical concentration. Biological functionalization of the PNIPAAm-co-carboxyAAm thin films was demonstrated for the cell adhesion ligand peptide cRGD via carbodiimide chemistry to mimic extracellular binding sites for the cell adhesion receptors integrin. The outcome of QCM-D measurements of cRGD-functionalized surfaces showed a maintained stimuli-responsiveness with slight reduction in T(P). A drying/rehydration procedure of a 9:1 lipid mixture of the cationic lipid dioleoyl-trimethylammoniumpropane (DOTAP) and the zwitterionic dioleoyl-phosphatidylcholine (DOPC) was utilized to form lipid bilayer membranes on PNIPAAm-co-carboxyAAM cushions. Fluorescence recovery after photobleaching (FRAP) revealed that lipid mobility was distinctively higher (6.3 - 9.6) µm2 s-1 in comparison to solid glass support ((3.0 - 5.9) µm2 s-1). In contradiction to the initial expectations, modulation of temperature and pH led to poor variations in lipid mobility that did not correlate with the PNIPAAm cushion swelling state. The results suggested a weak coupling of the lipid bilayer with PNIPAAm polymer cushions that can be slightly tuned by electrostatic interactions. The transmembrane adhesion receptor alpha(5)beta(1) integrin was reconstituted into liposomes consisting of DOPC/sphingomyelin/cholesterol 2:2:1 for the formation of polymer cushioned bilayers. PNIPAAm- co-carboxyAAM and maleic acid (MA) copolymers were used as cushions, both with the option for cRGD functionalization. On the MA copolymer cushions, fusion of proteoliposomes resulted in supported bilayers with mobile lipids as confirmed by FRAP. However, incorporated integrins were immobile. In an attempt to explain this observation, the medium-sized cytoplasmic integrin domain was accounted to hamper the movement by steric interactions with the underlying polymer chains in conjunction with electrostatic interactions of the cationic cytoplasmic domain with the oppositely charged MA copolymer. On the PNIPAAm-co-carboxyAAM cushion only a drying/rehydration procedure lead to bilayer formation. However, again the integrins were immobile, presumably due to the harsh treatment during preparation. Nevertheless, the results of the investigated set of PNIPAAm copolymer films suggest their application as temperature- and pH-responsive switchable layers to control interfacial phenomena in bio-systems at different physiological conditions. The PNIPAAm-co-carboxyAAm cushioned bilayer system represents a promising step towards extrinsically controlled membrane – substrate interactions.

Les microgels sont des particules colloïdales de polymère réticulé gonflées par un solvant. Déformables et poreuses, elles peuvent changer d’état de gonflement lors de l’application d’un stimulus. Ce travail de thèse a pour but de développer de nouveaux concepts tirant profit des propriétés stimulables et de la déformabilité intrinsèque des microgels tout en approfondissant les connaissances sur le comportement de ces objets en solution et aux interfaces. Les microgels de poly(N-alkylacrylamide) sont utilisés comme modèles. Dans un premier temps, notre travail a porté sur l’étude d’un nouveau type de microgels électrochimiluminescents grâce à l’incorporation d’un complexe métallique de ruthénium dans la matrice polymère. A la transition de phase, ces microgels présentent une exaltation de l’intensité ECL jusqu’à 2 ordres de grandeur, en lien avec la distance entre les sites redox. Le concept est ensuite transposé à des microgels sensibles aux saccharides et à des systèmes comportant deux luminophores, un donneur ECL et un accepteur d’énergie pouvant donner lieu à un transfert d’énergie par résonance. La deuxième partie de la thèse est consacrée à l’adsorption de microgels à une interface liquide-liquide plane, en vue de mieux comprendre l’origine de la stabilité des émulsions stabilisées par ce genre d’objets. De façon analogue aux protéines flexibles, les microgels changent de conformation à l’interface, passant d’un état étendu à un état comprimé, à l’origine de variations de l’élasticité interfaciale. Les microgels ainsi adsorbés sont fonctionnalisés de façon régiosélective dans l’eau et permettent de produire des microgels non symétriques, dits Janus, susceptibles de s’auto-assembler. / Microgels are colloidal particles made of cross-linked polymer swollen by a solvent. Soft and porous, they can adapt their swelling degree in response to a stimulus. The main objective of this work is to develop new concepts taking advantage of microgels’ stimuli-responsive properties and intrinsicsoftness while deepening understanding of their properties in solution and at interfaces. Poly(Nalkylacrylamide) microgels are used as a model. Initially our work focused on the study of a new type of electrochemiluminescent (ECL) microgels thanks to the incorporation of a ruthenium complex in the polymer matrix. At the volume phase transition, these microgels exhibit an amplification of the ECL intensity up to 2 orders of magnitude, related to the decrease of the distance between redox sites. This concept is then transposed to saccharides-sensitive microgels and systems bearing two luminophores, an ECL donor and an energy acceptor in order to give rise to resonance energy transfer. The second part of this manuscript is devoted to adsorption of microgels at a planar liquid-liquid interface, to improve knowledge on the origin of the stability of emulsions stabilized by such objects. Such as flexible proteins, microgels can change their conformation at the interface, from an extended to a compressed state, causing variation in the interfacial elasticity. When microgels are adsorbed they can also be functionalized regioselectively in water to produce non-symmetrical microgels, called Janus, able to self-assemble.

Artificial lipid bilayers formed on solid surface supports are widespread model systems to study physical, chemical, as well as biological aspects of cell membranes and fundamental interfacial interactions. The approach to use a thin polymer film representing a cushion for lipid bilayers prevents incorporated membrane proteins from pinning to the support and mimics the native environment of a lipid bilayer in certain aspects of the extracellular matrix and intracellular structures. A key component for cell anchorage to extracellular fibronectin is the transmembrane adhesion receptor alpha(5)beta(1) integrin. Its transport dynamics and clustering behavior plays a major role in the assembly of focal adhesions, which mediate mechanical forces and biochemical signals of cells with their surrounding. The system investigated herein is envisioned to use extrinsically controlled stimuli-responsive polymer cushions to tune the frictional drag between polymer cushion and mobile membranes with incorporated integrins to actively regulate lipid membrane characteristics. To attain this goal, a temperature- and pH-responsive polymer based on poly(N-isopropylacrylamide) copolymers containing varying amounts of carboxyl-group-terminated comonomers at different aliphatic spacer lengths (PNIPAAm-co-carboxyAAM) was surface-grafted to a poly(glycidyl methacrylate) anchorage layer. The swelling transitions were characterized using atomic force microscopy, ellipsometry and quartz crystal microbalance with dissipation monitoring (QCM-D) and found to be tunable over a wide range of temperature and pH. In agreement with the behavior of the polymers in solution, longer alkyl spacers decreased the phase transition temperature T(P) and higher contents of carboxylic acid terminated comonomers increased T(P) at alkaline conditions and decreased T(P) at acidic conditions. Remarkably, the point where the degree of carboxyl group deprotonation balances the T(P)-lowering effect of the alkyl spacer was distinctive for each alkyl spacer length. These findings illustrate how the local and global balance of hydrophilic and hydrophobic interactions along the copolymer chain allows to adjust the swelling transition to temperatures below, comparable, or above those observed for PNIPAAm homopolymers. Additionally, it could be shown that surface-grafting leads to a decrease in T(P) for PNIPAAm homopolymers (7°C) and copolymers (5°C - 10°C). The main reason is the increase in local polymer concentration of the swollen film constrained by dense surface anchorage in comparison to the behavior of dilute free chains in solution. In accordance with the Flory-Huggins theory, T(P) decreases with increasing concentration up to the critical concentration. Biological functionalization of the PNIPAAm-co-carboxyAAm thin films was demonstrated for the cell adhesion ligand peptide cRGD via carbodiimide chemistry to mimic extracellular binding sites for the cell adhesion receptors integrin. The outcome of QCM-D measurements of cRGD-functionalized surfaces showed a maintained stimuli-responsiveness with slight reduction in T(P). A drying/rehydration procedure of a 9:1 lipid mixture of the cationic lipid dioleoyl-trimethylammoniumpropane (DOTAP) and the zwitterionic dioleoyl-phosphatidylcholine (DOPC) was utilized to form lipid bilayer membranes on PNIPAAm-co-carboxyAAM cushions. Fluorescence recovery after photobleaching (FRAP) revealed that lipid mobility was distinctively higher (6.3 - 9.6) µm2 s-1 in comparison to solid glass support ((3.0 - 5.9) µm2 s-1). In contradiction to the initial expectations, modulation of temperature and pH led to poor variations in lipid mobility that did not correlate with the PNIPAAm cushion swelling state. The results suggested a weak coupling of the lipid bilayer with PNIPAAm polymer cushions that can be slightly tuned by electrostatic interactions. The transmembrane adhesion receptor alpha(5)beta(1) integrin was reconstituted into liposomes consisting of DOPC/sphingomyelin/cholesterol 2:2:1 for the formation of polymer cushioned bilayers. PNIPAAm- co-carboxyAAM and maleic acid (MA) copolymers were used as cushions, both with the option for cRGD functionalization. On the MA copolymer cushions, fusion of proteoliposomes resulted in supported bilayers with mobile lipids as confirmed by FRAP. However, incorporated integrins were immobile. In an attempt to explain this observation, the medium-sized cytoplasmic integrin domain was accounted to hamper the movement by steric interactions with the underlying polymer chains in conjunction with electrostatic interactions of the cationic cytoplasmic domain with the oppositely charged MA copolymer. On the PNIPAAm-co-carboxyAAM cushion only a drying/rehydration procedure lead to bilayer formation. However, again the integrins were immobile, presumably due to the harsh treatment during preparation. Nevertheless, the results of the investigated set of PNIPAAm copolymer films suggest their application as temperature- and pH-responsive switchable layers to control interfacial phenomena in bio-systems at different physiological conditions. The PNIPAAm-co-carboxyAAm cushioned bilayer system represents a promising step towards extrinsically controlled membrane – substrate interactions.