Der Vortrag beschreibt, wie sich mittels Kettenlinien als Kerbgeometrie der Spannungskonzentrationsfaktor an Querschnittsübergängen auf nahezu 1 reduzieren lässt. Mittels globaler Sensitivitätsstudien in der p-FEM-Software Creo Simulate wird mithilfe eines in Creo Parametric parametrisierten CAD-Modells der Kettenlinie in Parameterdarstellung ein normiertes Kerbzahldiagramm erstellt. Dieses erlaubt die Dimensionierung einer Kerbe, d.h. die Festlegung ihrer exakten Geometrie und der damit verbundenen Kerbzahl αk ohne die weitere Verwendung eines FEM-Programmes. / The presentation describes how to reduce the stress concentration factor at cross section transitions to nearly 1 by using a catenary curve as notch geometry (catenary fillet). With help of global sensitivity studies performed in the p-FEM-code Creo Simulate, a normalized stress concentration factor diagram is drawn. Therefore, a CAD-model of the catenary curve in parametric representation was developed. The diagram created allows to dimension the notch, that means to determine its exact geometry and stress concentration factor Kt, without further usage of a FEM code.

Der Vortrag beschreibt, wie sich mittels Kettenlinien als Kerbgeometrie der Spannungskonzentrationsfaktor an Querschnittsübergängen auf nahezu 1 reduzieren lässt. Mittels globaler Sensitivitätsstudien in der p-FEM-Software Creo Simulate wird mithilfe eines in Creo Parametric parametrisierten CAD-Modells der Kettenlinie in Parameterdarstellung ein normiertes Kerbzahldiagramm erstellt. Dieses erlaubt die Dimensionierung einer Kerbe, d.h. die Festlegung ihrer exakten Geometrie und der damit verbundenen Kerbzahl αk ohne die weitere Verwendung eines FEM-Programmes. / The presentation describes how to reduce the stress concentration factor at cross section transitions to nearly 1 by using a catenary curve as notch geometry (catenary fillet). With help of global sensitivity studies performed in the p-FEM-code Creo Simulate, a normalized stress concentration factor diagram is drawn. Therefore, a CAD-model of the catenary curve in parametric representation was developed. The diagram created allows to dimension the notch, that means to determine its exact geometry and stress concentration factor Kt, without further usage of a FEM code.

M. Tech. (Department of Mechanical Engineering, Faculty of Engineering and Technology), Vaal University of Technology. / The purpose of this research was to develop optimal numerical solutions that can be employed during the design of cross bored thick-walled compound cylinders. The geometric design parameters of a cross bored compound cylinder that were optimized include shrinkage pressure, cross bore size, shape, location, and obliquity. Finite Element Analysis (FEA) modeling software called Abaqus version 2019 was used to generate numerical solutions. A total of 48 different part models were created and analyzed in this work. The generated FEA results from these models were validated using analytical solutions developed from Lame’s theory. The effects of shrinkage pressure on hoop stresses and Stress Concentration Factor (SCF) were studied to determine the optimal conditions. The optimum shrinkage pressure obtained was henceforth used for further analysis in this work. In addition, using one factor at time optimization technique, an optimization process was carried out to determine the optimal combination of the cross bore configuration geometry that gives minimum SCF. These parameters of cross bore configuration geometry include different sizes of either circular or elliptical-shaped cross bore, positioned at radial, offset, and/or inclined. The analyses of the effects of shrinkage pressure ranging from 4.4733 to 223.662 MPa on 11 different part models, established that the shrinkage pressure of 89.464 MPa generated the minimum SCF magnitude of 3.02. After analyzing 8 different circular cross bore size ratios ranging from 0.1 to 0.8, at the radial position, it was established that the hoop stress increases with an increase in a cross bore size. The smallest cross bore size ratio of 0.1 gave the lowest hoop stress and minimum SCF of 3.02. Whereas the highest stress was developed at the cross-size ratio of 0.8 with an SCF magnitude of 6.75. The minimum magnitude of SCF translates to a reduction of the pressure carrying capacity of the compound cylinder by 67% than a similar plain compound cylinder. Generally, offsetting of the circularly shaped cross bore from the radial position, led to a reduction of the magnitude of SCFs. For instance, from the 8 offset positions analyzed, the minimum SCF occurred at the offset position of 0.006 m with a magnitude of 2.50. This SCF magnitude indicated a reduction of pressure carrying capacity of 60% in comparison to a similar plain compound cylinder. Evaluation of 12 different diameter ratios of elliptical-shaped cross bore ranging from 0.5 to 10, at the radial position, established the lowest SCF magnitude of 1.33 that occurred at a diameter ratio of 5. Henceforth, this optimum diameter ratio was used for further analysis. This aforesaid SCF magnitude translated to a reduction of the pressure carrying capacity of the compound cylinder by 24.81% when compared to a similar plain compound cylinder. Besides, offsetting of elliptically shaped cross bore generally decreased the magnitudes of SCFs. Therefore, for elliptically shaped cross bore, the lowest SCF occurred at radial position with magnitude of 1.33. A general comparison between the effects of circular and elliptical cross bore, established that the elliptical-shaped cross bores generated both lower hoop stresses and SCFs than those of circularly shaped cross bores. On the other hand, oblique elliptical offset cross bores along the Z-axis of the compound cylinder led to an increase in SCFs. As the oblique angle increased from 0 0 to 75 0, the SCFs also increased progressively, however, there was a significant increase in SCF when the inclination angle increased from 60 0 to 75 0. The lowest and highest SCF magnitude was 1.52 and 1.92 at 15 0 and 6.19 at 75 0, respectively. Overall, the optimum geometric configuration of a cross bore in a thick compound cylinder was found to be elliptically shaped, offset at radial position which is an obliquity angle of 0 0 having a diameter ratio a/b of 5.

No description available.

Als Stand der Technik sind einfache, kreisförmige Verrundungen zur Reduktion von Kerbspannungen an Querschnittsübergängen bekannt, für die aus Tabellenwerken / Diagrammen in der Literatur die Formzahl einfach abgelesen werden kann. Die Effizienz der Spannungsreduktion solcher Lösungen ist jedoch sehr begrenzt. Ziel der Arbeit ist es daher, dem Konstrukteur bzw. Berechnungsingenieur ein Verfahren in die Hand zu geben, mit dem er für Standardquerschnittsübergänge und Standardlastfälle "Nicht-Kreiskerben" ohne teure und zeitaufwendige FEM-Analyse einfach durch Nutzung geeigneter Formzahldiagramme auslegen kann. Dabei sind sogar Formzahlen von nahezu eins möglich, d.h., in der "Kerbe" bleibt praktisch nur noch die Nennspannung übrig. Die Präsentation ist zweitgeteilt: Im ersten Teil werden die Arbeitsmethoden bzw. Softwarefunktionen und verwendeten Softwarewerkzeuge vorgestellt: Dies sind die Programme Creo Parametric als vollparametrisches CAD-Werkzeug und Creo Simulate als p-FEM-Programm der Parametric Technology Coprporation (PTC). Der zweite Teil der Präsentation beschreibt den Gültigkeitsbereich sowie die untersuchten Kerbgeometrien: Die einfache kreisförmige Verrundung als Stand der Technik, die Zwei-Radien-Kerbe, die Baud-Kurve, die Methode der Zugdreiecke nach Claus Mattheck, die elliptische Kerbe sowie die konische Rundung als generalisierte elliptische Kerbe. Es wird kurz eine Bibliothek vorgestellt, mit der solche Kerben einfach ausgelegt werden können, d.h. Ihre exakte Geometrie festgelegt sowie die zugehörige Formzahl αk bestimmt werden kann. / Circular (one-radius) fillets are known as state-of-the-art for reducing notch stresses at cross section transitions. The stress concentration factor Kt of such geometries can be read out from diagrams/tables given in the literature. However, the efficiency of stress reduction of circular notches is very limited. The goal of the work therefor is to present a method for the designer/analyst how to design non-circular notches/fillets just by using suitable Kt-diagrams without time-consuming and expensive FEM analyses. Kt-numbers of nearly one are possible, that means in the "notch" just the nominal stress appears and no stress concentration takes place. The presentation has two parts: Part one describes the working methods and software functions as well as software tools: Creo Parametric as fully-parametric CAD program and Creo Simulate as embedded p-FEM-tool from Parametric Technology Corporation (PTC) have been used. The second part describes the range of validity and the examined notch geometries: The one-radius fillet as state-of-the-art, the two-radii filet, the Baud-curve, the method of tensile triangles from Claus Mattheck, the standard elliptical fillet and the conical round as generalized elliptical fillet. A notch layout library is shortly presented that allows to design such fillets, that means exactly determine the notch geometry and the related stress concentration factor Kt.

Compression fracture specimens are ideally suited for miniaturization down to tens of microns. Fracture testing of thermal barrier coatings, ceramics and glasses are also best accomplished under compression or indentation. Compression fracture specimen of finite size with constant form factor was not available in the literature. The finite-sized specimen of edge cracked semicircular disk (ECSD) is designed which has the property of constant form factor. The novel ECSD specimen is explored further using weight function concept. This thesis, therefore, is mainly concerned with the design, development and geometric optimization of compression fracture specimen vis a vis their characterization of form factors, weight functions and isotropic points in the uncracked geometry. Inspired by the Brazilian disk geometry, a novel compression fracture specimen is designed in the form of a semicircular disk with an edge crack which opens up due to the bending moment caused by the compressive load applied along its straight edge. This new design evolved from a set of photoelastic experiments conducted on the Brazilian disk and its two extreme cases. Surprisingly, normalized mode-I stress intensity factor of the semicircular specimen loaded under a particular Hertzian way, is found constant for a wide range of relative crack lengths. This property of constant form factor leads to the development of weight function for ECSD for deeper analysis of the specimen. The weight function of a cracked geometry does not depend on loading configuration and it relates stress intensity factor to the stress distribution in the corresponding uncracked geometry through a weighted integral. The weight function for the disk specimen is synthesized in two different ways: using the conventional approach which requires crack opening displacement and the dual form factor method which is newly developed. Since stress distribution in the uncracked specimen is required in order to use weight function concept, analytical solution is attempted using linear elasticity theory. Since closed form solution for stresses in the uncracked semicircular disk is seldom possible with the available techniques, a new semi-analytical method called partial boundary collocation (PBC), is developed which may be used for solving any 2-D elasticity problem involving a semi-geometry. In the new method, part of the boundary conditions are identically satisfied and remaining conditions are satisfied at discrete boundary points. The classical stress concentration factor for a semi-in finite plate with a semicircular edge notch re-derived using PBC is found to be accurate to the eighth decimal. To enhance the form factor in order to test high-toughness materials, edge cracked semicircular ring (ECSR) specimen is designed in which bending moment at the crack-tip is increased significantly due to the ring geometry. ECSR is analyzed using nite element method and the corresponding uncracked problem is analyzed by PBC. Constant form factor is found possible for the ring specimen with tiny notch. In order to avoid varying semi-Hertzian angle during practice and thereby ensure consistent loading conditions, the designs are further modified by chopping at the loading zones and analyzed. Photoelastic isotropic points (IPs) which are a special case of zeroth order fringe (ZOF) are often found in uncracked and cracked specimens. An analytical technique based on Flamant solution is developed for solving any problem involving circular domain loaded at its boundary. Formation of IPs in a circular disk is studied. The coefficients of static friction between the surfaces of disk and loading fixtures, in photoelastic experiments of three-point and four-point loadings, are explored analytically to confirm with experimental results. The disk under multiple radial loads uniformly spaced on its periphery is found to give rise to one isolated IP at the center. Splitting of this IP into a number of IPs can be observed when the symmetry of normal loading is perturbed. Tangential loading is introduced along with normal loading to capture the effect of the composition on formation of IPs. Bernoulli's lemniscate is found to fit fringe order topology local to multiple IPs. Isotropic points along with other low fringe order zones including ZOF are ideal locations for material removal for weight reduction. Making a small hole in the prospective crack path at the IP location in the uncracked geometry might provide dual benefits: 1. Form factor enhancement; 2. Crack arrestor. Thus, this thesis describes experimental, theoretical and computational investigations for the design, development and calibration of novel compact compression fracture specimens.

Als Stand der Technik sind einfache, kreisförmige Verrundungen zur Reduktion von Kerbspannungen an Querschnittsübergängen bekannt, für die aus Tabellenwerken / Diagrammen in der Literatur die Formzahl einfach abgelesen werden kann. Die Effizienz der Spannungsreduktion solcher Lösungen ist jedoch sehr begrenzt. Ziel der Arbeit ist es daher, dem Konstrukteur bzw. Berechnungsingenieur ein Verfahren in die Hand zu geben, mit dem er für Standardquerschnittsübergänge und Standardlastfälle "Nicht-Kreiskerben" ohne teure und zeitaufwendige FEM-Analyse einfach durch Nutzung geeigneter Formzahldiagramme auslegen kann. Dabei sind sogar Formzahlen von nahezu eins möglich, d.h., in der "Kerbe" bleibt praktisch nur noch die Nennspannung übrig. Die Präsentation ist zweitgeteilt: Im ersten Teil werden die Arbeitsmethoden bzw. Softwarefunktionen und verwendeten Softwarewerkzeuge vorgestellt: Dies sind die Programme Creo Parametric als vollparametrisches CAD-Werkzeug und Creo Simulate als p-FEM-Programm der Parametric Technology Coprporation (PTC). Der zweite Teil der Präsentation beschreibt den Gültigkeitsbereich sowie die untersuchten Kerbgeometrien: Die einfache kreisförmige Verrundung als Stand der Technik, die Zwei-Radien-Kerbe, die Baud-Kurve, die Methode der Zugdreiecke nach Claus Mattheck, die elliptische Kerbe sowie die konische Rundung als generalisierte elliptische Kerbe. Es wird kurz eine Bibliothek vorgestellt, mit der solche Kerben einfach ausgelegt werden können, d.h. Ihre exakte Geometrie festgelegt sowie die zugehörige Formzahl αk bestimmt werden kann. / Circular (one-radius) fillets are known as state-of-the-art for reducing notch stresses at cross section transitions. The stress concentration factor Kt of such geometries can be read out from diagrams/tables given in the literature. However, the efficiency of stress reduction of circular notches is very limited. The goal of the work therefor is to present a method for the designer/analyst how to design non-circular notches/fillets just by using suitable Kt-diagrams without time-consuming and expensive FEM analyses. Kt-numbers of nearly one are possible, that means in the "notch" just the nominal stress appears and no stress concentration takes place. The presentation has two parts: Part one describes the working methods and software functions as well as software tools: Creo Parametric as fully-parametric CAD program and Creo Simulate as embedded p-FEM-tool from Parametric Technology Corporation (PTC) have been used. The second part describes the range of validity and the examined notch geometries: The one-radius fillet as state-of-the-art, the two-radii filet, the Baud-curve, the method of tensile triangles from Claus Mattheck, the standard elliptical fillet and the conical round as generalized elliptical fillet. A notch layout library is shortly presented that allows to design such fillets, that means exactly determine the notch geometry and the related stress concentration factor Kt.