Le principe d'un SMES (Superconducting Magnetic Energy Storage) est le stockage d'énergie dans l'induction magnétique créé par une bobine court-circuitée. Dans ce travail, les possibilités offertes par les SMES en matériau supraconducteur haute température critique sont étudiées pour l'application source impulsionnelle. L'étude est plus particulièrement orientée vers l'alimentation de lanceurs électromagnétiques, pour laquelle l'utilisation de SMES est comparée à l'alimentation conventionnelle par banc de condensateurs. Dans ce cadre, de nouveaux concepts de SMES adaptés à la charge sont proposés, permettant des gains conséquents en terme de rendement énergétique global. En parallèle, la faisabilité pratique d'une alimentation de lanceur par SMES est envisagée par la réalisation d'un démonstrateur. Celui-ci est une évolution d'un dispositif existant testé avec succès en 2007. La réalisation de ce démonstrateur a permis de valider des solutions technologiques concernant notamment le refroidissement et la tenue diélectrique d'un SMES hTc de forte puissance. Ce travail est soutenu par la DGA (Délégation Générale pour l'Armement).

I studied organic semiconductor/ferromagnet interfaces by characterizing them by spin-polarized electron scattering and photoemission spectroscopy experiments. In the first part, a completely unexpected behaviour of the spin-dependent electron reflection properties of these interfaces is observed. In fact, sub-monolayer coverage of the organic molecules makes the electron reflection amplitude independent of the spin, i.e. both the reflectivity and the reflection phase become independent of the spin orientation of the incident electrons. Although I am not able at the moment to identify the cause of this phenomenon, I show that it is a very general phenomenon which is independent of the energy of the primary electrons, the choice of the ferromagnetic substrate, the choice of the organic molecule, and of the orientation of the initial spin polarization. It is not due to a change of the surface magnetization, a depolarization of the primary electrons, or a direct interaction of the molecules with the ferromagnetic substrate. Moreover, theory does not predict so far the experimental results and further research is required to unveil the physics behind these observations. In the second part of my thesis, spin-resolved photoemission experiments have been performed at the synchrotron SOLEIL. The main result is the observation of a highly spin-polarized molecule-induced electronic state close to the Fermi level. Measurements as a function of the organic layer thickness allow us to determine the interfacial character of this electronic state. Finally, these results are compared with theoretical calculations performed at the institute.

19 Dec 2004. / Published through the Information Bridge: DOE Scientific and Technical Information. "IS-T 1936" Jongik Park. 12/19/2004. Report is also available in paper and microfiche from NTIS.

Thesis (Ph.D.); Submitted to Iowa State Univ., Ames, IA (US); 12 Dec 2003. / Published through the Information Bridge: DOE Scientific and Technical Information. "IS-T 2048" Stavroula Foteinopoulou. 12/12/2003. Report is also available in paper and microfiche from NTIS.

While the free electron model can often be surprisingly successful in describing properties of solids, there are plenty of materials in which interactions between electrons are too significant to be neglected. These strongly correlated systems sometimes exhibit rather unexpected, unusual and useful phenomena, understanding of which is one of the aims of condensed matter physics. Heat capacity measurements of paramagnetic YFe$_{2}$Ge$_{2}$ give a Sommerfeld coefficient of about 100 mJ mol$^{−1}$ K$^{−2}$, which is about an order of magnitude higher than the value predicted by band structure calculations. This suggests the existence of strong electronic correlations in the compound, potentially due to proximity to an antiferromagnetic quantum critical point (QCP). Existence of the latter is also indicated by the non-Fermi liquid T$^{3/2}$ behaviour of the low temperature resistivity. Below 1.8 K a superconducting phase develops in the material, making it a rare case of a non-pnictide and non-chalcogenide iron based superconductor with the 1-2-2 structure. This thesis describes growth and study of a new generation of high quality YFe$_{2}$Ge$_{2}$ samples with residual resistance ratios reaching 200. Measurements of resistivity, heat capacity and magnetic susceptibility confirm the intrinsic and bulk character of the superconductivity, which is also argued to be of an unconventional nature. In order to test the hypothesis of the nearby QCP, resistance measurements under high pressure of up to 35 kbar have been conducted. Pressure dependence of the critical temperature of the superconductivity has been found to be rather weak. μSR measurements have been performed, but provided limited information due to sample inhomogeneity resulting in a broad distribution of the critical temperature. While the superconductivity is the result of an effective attraction between electrons, under different circumstances the electronic properties of a system can instead be dictated by the Coulomb repulsion. This is the case for another transition metal based compound NiS$_{2}$, which is a Mott insulator. Applying hydrostatic pressure of about 30 kbar brings the material across the Mott metal-insulator transition (MIT) into the metallic phase. We have used the tunnel diode oscillator (TDO) technique to measure quantum oscillations in the metallised state of NiS$_{2}$, making it possible to track the evolution of the principal Fermi surface and the associated effective mass as a function of pressure. New results are presented which access a wider pressure range than previous studies and provide strong evidence that the effective carrier mass diverges close to the Mott MIT, as expected within the Brinkman-Rice scenario and predicted in dynamical mean field theory calculations. Quantum oscillations have been measured at pressures as close to the insulating phase as 33 kbar and as high as 97 kbar. In addition to providing a valuable insight into the mechanism of the Mott MIT, this study has also demonstrated the potential of the TDO technique for studying materials at high pressures.

No description available.

Les travaux de cette thèse portent sur l'intégration dans le réseau électrique du limiteur supraconducteur de courant (SCFCL). Un modèle du ruban supraconducteur ont été développé et validé grâce à une comparaison avec des tests expérimentaux. Premièrement, ce modèle a permis le dimensionnement du SCFCL du projet Eoccoflow (projet européen). Dans un deuxième temps, le modèle de SCFCL est intégré dans différents types de réseau. D'une part, l'intégration du SCFCL dans les réseaux haute tension continu maillés rend vraisemblable la protection de tels réseaux. D'autre part, grâce au SCFCL de nouvelles architectures du réseau de distribution sont proposées permettant l'intégration massive de génération distribuée. Cette thèse se clot sur le dimensionnement et les tests d'un SCFCL pour un réseau à taille réduite. / This PhD deals with superconducting fault current limiter (SCFCL) network integration. A model of a superconducting tape had been developed and validated in comparison with experimental quench tests. This SCFCL model allowed us to design the SCFCL of the european project Eccoflow. Using this SCFCL model, SCFCLs are integrated in various types of networks. On one hand, SCFCL benefits are first studied in case of meshed HVDC networks. Indeed, the SCFCL makes realistic the protection of such networks. On the other hand, thanks to the SCFCL some new distribution network topologies are suggested in order to increase the distributed generation integration capacity. This PhD ends with the design and the test of a SCFCL in a downsize scale network.

Fe chalcogenides : The discovery of superconductivity in Fe based compounds trig- gered an intense research activity in this field with significant importance given to material synthesis. As a result, numerous materials falling into four major classes and sharing similarities in physical properties were synthesized and investigated. In spite of subtle differences, all of them share many common features like crystal symmetry, magnetic ground state, close resemblance in phase diagram etc. Fe super- conductors are broadly classified into Fe pnictides (with Fe − pnictogen layer) and Fe chalcogenides (with Fe − chalcogen layer) in which the binary Fe chalcogenides possess the simplest crystal structure. The distinct magnetic and superconducting properties make them interesting candidates for research. Detailed study on such systems demand high quality single crystals. This thesis discusses single crystal growth and properties of Fe1+yTe1−xSex. Struc- tural, magnetic, superconducting and thermal properties of pristine and substituted compounds are explored. A characteristic feature associated with binary chalco- genides is the presence of excess Fe in the interstitial sites represented by y in the chemical formula. By fine tuning the composition, the effect of interstitial Fe on various physical properties can be analyzed. The current work deals with the influence of interstitial excess Fe on the structural, magnetic and superconducting properties of the parent compound Fe1+yTe and Se substituted Fe1+yTe1−xSex. The results are organized into eight chapters; an outline of each chapter is given below. Chapter 1 gives an introduction to the broad field of Fe superconductors. A de- tailed literature review providing comparison of Fe pnictides with chalcogenides is included. The background of the current work is discussed with reference to the im- portant aspects of crystal structure and its relation to the ordered ground states. An overview of the important theories on magnetic ordering and superconducting pair- ing is provided. In the later part, a generic phase diagram along with the individual phase diagrams of important systems are discussed. This is followed by a discus- sion of the characteristic properties of iron chalcogenides and different methods of bulk synthesis. The chapter is concluded with a note on the motivation behind the present work. Chapter 2 discusses the crystal growth techniques and experimental methods used in the present work. The basic working principles are briefly explained. Chapter 3 provides a detailed discussion of the single crystal growth procedure, its customization and basic characterization. Single crystals of all compositions un- der discussion are grown by a modified horizontal Bridgman method. Material preparation, growth parameters and overall temperature profile of crystal growth process are described. Single crystalline nature of the as-grown crystals is con- firmed with Laue scattering technique. All crystals show tetragonal symmetry at room temperature. The approximate crystal orientation is deduced by indexing the X-ray diffraction pattern of the cleaved crystals. The diffraction patterns exhibit a set of (00l) peaks. A detailed composition analysis is performed on the samples. The sample properties are very sensitive to composition and careful estimation is per- formed by conducting repeated measurements at multiple points on the samples under study. Chapter 4 deals with superconducting and magnetic properties of Fe1+yTe0.5Se0.5. Single crystals of two different Fe concentration, y=0.04 and 0.09 are grown in which the concentration of Se and Te are maintained close to 0.5. Among binary Fe chalcogenides, half substituted iron telluride shows the highest TC (15 K) at ambient pressure. Accordingly, this composition is chosen to evaluate the role of Fe concentration in modulating the superconducting behavior. Two different batches of both the samples are grown, one set containing small amounts of impurity phases and the other, representing a pure primary phase. Resistivity measurements performed on both compositions, y=0.04 and 0.09, show onset of superconductivity near 15 K. In the normal state above TC, the temperature derivative of resistivity dρ/dT changes from positive to negative as the excess Fe concentration rises. At higher Fe concentrations, a log 1/T divergence is discernible in the normal state. The contribution of interstitial Fe to superconductivity has been analyzed using magnetization measurement techniques. An increase in the width of superconducting transition is seen in all measurements as the Fe content increases. The superconducting volume fraction estimated from susceptibility data demonstrates that high concentration of Fe is not favorable to superconductivity. The upper and lower critical field are esti- mated from electric resistivity data (in applied magnetic field) and magnetization isotherms respectively. Comparison of the lower critical field between two compo- sitions strengthens the argument that higher excess Fe leads to suppression of super- conductivity. The second set of crystals with impurity phases reveals an anomalous magnetization peak near 125 K. The results from resistivity, DC magnetization and ac susceptibility are compared. Chapter 5 addresses the influence of excess Fe on the ordered ground state. The antiferromagnetic parent compound, Fe1+yTe single crystals, are also grown using the same procedure. It is proposed that excess Fe occupying the interstitial sites possess local moments which could interact with the magnetic phases. In an at- tempt to understand their magnetic properties in detail, single crystals are grown with y=0.06, 0.09, 0.11, 0.12, 0.13 and 0.15. Fe1+yTe undergoes magnetostructural transition at TN=67 K. As the concentration of Fe varies from 0.06 to 0.13, a marked suppression of TN occurs from 67 K to 56 K. Moreover, a single first order transi- tion is seen to split into two at the critical concentration, y=0.12. The derivative plot of magnetization and specific heat data clearly illustrate two well-separated peaks. The two transitions are denoted as TN=57 K and TS=46 K. TN here is identified as a second order transition and TS as a first order transition. The second order transi- tion is evident from the λ-like nature of the peak in the specific heat measurement. The first order transition is associated with a large thermal hysteresis in the heat- ing and cooling cycle. Raw data from the heat capacity calorimeter gives a clear hint towards the first order nature of TS. As the composition of Fe rises further, the multiple transitions subside and disappear. For higher concentration, y=0.15, a sin- gle continuous phase transition is observed. Impurity free, pure phase is noticed in most of the samples as evident in powder X-ray diffraction and bulk magneti- zation measurements. The thermal data of various compositions are analyzed and compared. Electrical resistivity data clearly reveals the shift in phase transition and the presence of multiple transitions. Unlike Fe1+yTe1−xSex, all compositions here display similar behavior above TN, irrespective of the concentration of excess Fe. Chapter 6 devotes special emphasis to the evolution of structural and magnetic properties of the critical composition, Fe1.12Te where multiple transitions are ob- served. The low temperature structure of the crystal is studied in detail using syn- chrotron powder X-ray diffraction. The data in the vicinity of the two transitions, TN and TS are carefully analyzed. The room temperature crystal structure belongs to tetragonal symmetry with P4/nmm space group, where it is paramagnetic. As the sample is cooled to just below TN, a magnetostructural transition occurs from tetragonal to orthorhombic space group Pmmn. Below TN, the XRD pattern of the tetragonal (200) peak splits into (200) and (020) representing an orthorhombic distortion. The second transition is observed at TS where the orthorhombic struc- ture undergoes a monoclinic distortion, to P21/m. Below TS, a mixed phase of or thorhombic and monoclinic structures are present. The powder diffraction studies are supplemented with thermodynamic measurements. From specific heat analy- sis, the different contributions and the change in entropy across the transitions are estimated. Linear thermal expansion study has confirmed the two structural transi- tions. The changes occurring in lattice parameters, bond distances, bond angles and unit cell volume as a function of temperature are calculated using powder pattern refinement. Synchrotron data, linear thermal expansion and thermodynamic mea- surement results all point to strong magnetostructural coupling in this material. A temperature-composition phase diagram is formulated using results obtained from different Fe compositions. Transition temperature is plotted as a function of excess Fe content, highlighting its role in determining the structural and magnetic phases in Fe1+yTe. Chapter 7 deals with the magnetic and superconducting properties of Se substi- tuted Fe1+yTe1−xSex. Single crystals are grown by carefully varying the concen- tration of Se from x=0.02 to 0.25 while keeping the nominal composition of excess Fe more or less same. In this work, focus is given to Fe-rich, selenium substituted compositions. The intention is to explore how Se substitution affects the multiple transitions observed in Fe1.12Te. At 2% Se substitution, the split peaks are evident with a slight shift in temperature. The temperature interval between the two tran- sitions decreases in comparison to the pristine compound. For further increases in Se concentration, instead of two well separated peaks, a weak broad hump is ob- served. For compositions with x >0.10, long range magnetic ordering is suppressed. As x increases above 0.15 the electrical resistivity drops indicating the onset of su- perconductivity. However, in the composition range 0.15 ≤ x ≤ 0.25, neither long range magnetic order nor bulk superconductivity is present. Alternately, weak magnetic transitions above the superconducting transition are visible. The transport and magnetic properties are similar to that observed in Fe1.09Te0.5Se0.5. By tuning the Se composition in Fe-rich samples, the magnetic and structural transitions, originally seen in the parent compound are suppressed. The emergence of superconductivity is also discussed. The last section of the chapter provides the modified phase diagram as a function of Se concentration, combining all compositions discussed in the thesis. This gives a detailed description of Fe chalcogenides in the composition range, x=0 to 0.5 with special emphasis on Fe rich samples. The different regions in the phases diagram describe the peculiar properties of Fe chalcogenides. Chapter 8 concludes the thesis with general conclusions pertaining to various observations made in the different chapters. Prospects for future work are briefly outlined.

Nous présentons des études expérimentales et théoriques de disiliciures alcalino-terreux, le disilane (Si2H6) et du carbone à haute pression. Nous étudions les disiliciures et en particulier le cas d’une phase plane de BaSI2 qui a une structure hexagonale avec des liaisons sp3 entre les atomes de silicium. Cet environnement électronique conduit à un gaufrage de feuilles du silicium. Nous démontrons alors une amélioration de la température de transition supraconductrice de 6 à 8.9 K lorsque les couches de silicium s’aplanissent dans cette structure. Des calculs ab initio basés sur DFT ont guidé la recherche expérimentale et permettent d’expliquer comment les propriétés électroniques et des phonons sont fortement affectés par les fluctuations du flambage des plans de silicium. Nous avons aussi étudié les phases cristallines de disilane à très haute pression et une nouvelle phase métallique est proposé en utilisant les méthodes de prédiction de structure cristalline. Les températures de transition calculées donnant un supraconducteur autour de 20 K à 100 GPa. Ces valeurs sont significativement plus faibles comparées à celles avancées dans la littérature. Finalement, nous présentons des études de structures de carbone à haute pression à travers une recherche de structure systématique. Nous avons trouvé une nouvelle forme allotropique du carbone avec une symétrie Cmmm que nous appelons Z-carbone. Cette phase est prévue pour être plus stable que le graphite pour des pressions supérieures à 10 GPa. Des expériences et simulation de rayon-X et spectre Raman sugèrent l’existence de Z-carbone dans des micro-domaines de graphite sous pression / We present experimental and theoretical studies of sp3 materials, alkaline-earth-metal (AEM) disilicides, disilane (Si2H6) and carbon at high pressure. First, we study the AEM disilicides and in particular the case of a layered phase of BaSi2 which has an hexagonal structure with sp3 bonding of the silicon atoms. This electronic environment leads to a natural corrugated Si-sheets. Extensive ab initio calculations based on DFT guided the experimental research and permit explain how electronic and phonon properties are strongly affected by changes in the buckling of the silicon plans. We demonstrate experimentally and theoretically an enhancement of superconducting transition temperatures from 6 to 8.9 K when silicon planes flatten out in this structure. Second, we investigated the crystal phases of disilane at the megabar range of pressure. A novel metallic phase of disilane is proposed by using crystal structure prediction methods. The calculated transition temperatures yielding a superconducting Tc of around 20 K at 100 GPa and decreasing to 13 K at 220 GPa. These values are significantly smaller than previously predicted Tc’s and put serious drawbacks in the possibility of high-Tc superconductivity based on silicon-hydrogen systems. Third, we studied the sp3-carbon structures at high pressure through a systematic structure search. We found a new allotrope of carbon with Cmmm symmetry which we refer to as Z-carbon. This phase is predicted to be more stable than graphite for pressures above 10 GPa and is formed by sp3-bonds. Experimental and simulated XRD, Raman spectra suggest the existence of Z-carbon in micro-domains of graphite under pressure

There was a fame time for silicon in condensed matter physics, then the graphene era came and now topological insulators are gaining lot of attention, but magnetism in condensed matter physics has remained always fascinating starting from the ancient days up to now and it will remain as one of the core topic in basic or applied physics. The improvement in the modern techniques allows one to explore magnetism in different length scales as well as in different time scales. As an effect of the improvement in experimental techniques, different magnetic anomalies are unearthed. As a result theories are getting refined and the area of magnetism progresses. From the material point of view, oxides carry the most diverse nature in condensed matter starting from high temperature superconductivity (HTS), colossal magnetoresistance, metal insulator transition etc. to ferromagnetism (FM), anti-ferromagnetism (AFM), spin glass (SG) and so on. Among this list, SG and HTS are one of the least understood topics in magnetism till today. A large research community is involved in understanding the underlying physics behind these two, especially in transition metal oxides. It has drawn attention not only due to fundamental aspects but also due to various applications in day to day life. This thesis is an attempt to understand these two phenomena in transition metal oxides. As the title of this thesis suggest, it is all about magnetic and magneto-transport properties of certain transition metal oxide (crystalline) addressing the interplay between two competing order parameters to understand the underlying physics behind it from an experimental point of view. We have studied two different kinds of competing interactions: (i) the FM/AFM interplay either in bulk or at the interface of the two layers in thin films; (ii) the interplay between FM and superconductivity (SC) in superconductor (S)/ferromagnet (F) heterostructures. Basically both of these two kinds lead to non-equilibrium phenomena in these oxides. One of such competition is between FM and AFM leading to slow dynamics (glassy physics). Disorder and frustrations are the key ingredients for such slow dynamics. The spin frustration arises either due to geometry or due to competing interactions. For example, in a triangular antiferromagnet due to the triangular geometry spins gets frustrated. Now, if it prevails spin disorder as well then it satisfies both the criteria for a spin glass and hence it gives birth to glassiness. Another kind of competition is the interplay among SC and FM. It is known that SC and FM are two antagonistic quantum phenomena thus in a single material SC (singlet pairing) and FM does not co-exist. However one can realize this by making F/S heterostructures and observe the battle between these two competing order parameters. The spin polarized quasiparticle injection from F creates non equilibrium spin density inside S and thereby suppressing the order parameter of S. Also by choosing an appropriate ferromagnet the vortex motion inside S can be arrested to certain extent which can enhance the critical current density of S. Thus FM/SC interplay has become an alternative way to look at the high temperature superconductivity. This thesis is categorized into nine chapters. The summary of each chapter is as follows: Chapter: 1 contains certain concepts of magnetism and superconductivity which is useful to understand the topics and experiments described in this thesis. Chapter: 2 gives the underlying principles of the various experimental techniques used in this thesis. Chapter: 3 describes the magnetic properties of successfully synthesized five compositions of LixNi(2-x)O2 (0.67<x<0.99) which has five distinct ground states namely antiferromagnet (AF), spin glass (SG), cluster glass (CG), re-entrant spin glass (RSG) and ferromagnet (FM). The SG and CG ground state has been well described by the frequency dependent peak shift. From the power-law divergence of critical slowing down the estimated value of relaxation time indicates the presence of interacting macro spins (spin cluster) rather than individual spins in certain LixNi(2-x)O2 samples possessing CG ground state which is also supported by the Arrhenius law. The shift in the spin freezing temperature with the application of dc field obeys Almeida-Thouless line. It also exhibits memory effect which is generic to the slow dynamics. The remnant magnetization relaxation follows logarithmic decay. Interestingly, the sample having RSG ground state shows memory effect up-to 50K and behaves like a FM above that temperature. FC-ZFC M(T) curve shows a splitting at the ordering temperature. The critical analysis across the ferromagnetic-paramagnetic phase transition yields a self-consistent γ, β and δ value and the spin-spin interaction in this material follows long range mean field model. The critical exponents obey Widom scaling law: δ = 1 + γ β −1. The universality class of the scaling relations is also verified where the scaled m and scaled h collapses into two branches. Finally the magnetic phase diagram illustrates a vivid picture of the gradual evolution of ferromagnetism in LixNi(2-x)O2 through a glassy state. As a concluding remark, we think, the present study of glassy physics in magnetic insulator/semiconductor sets an example to compare them with the conventional metallic spin glass system. Chapter: 4 exhibits the results of the structural, magnetic and transport measurements to elucidate some of the most striking unusual physical responses of bulk SrRuO3. Two set of polycrystalline SrRuO3 samples with unique ordering temperature have been synthesized. In one case, we have taken the stoichiometric weight ratio of precursors that eventually resulted in Ru-deficient SrRuO3(SROD). In the other case, we have taken extra 2% wt. RuO2 deliberately to form stoichiometric SrRuO3(SRO). Both the samples are found to crystallize in orthorhombic crystal structure with Pnma space group. The low temperature magnetization is found to be well described by the Bloch T3/2 law and the magnetization near Tc is found to follow the scaling law; M~(Tc-T)β with β=0.35 and β=0.30 for SRO and SROD respectively, apparently showing the 3D Ising behaviour. This aspect will be elaborated in the next chapter. The magnetic ac susceptibility study exhibits a broad hump far below the ferromagnetic ordering temperature and the frequency dependence of this hump position exhibits the characteristics of multiple relaxations. Most strikingly, we notice a low temperature glassy magnetic behaviour clearly demonstrated by the time dependent memory effect. This is very surprising and unlikely to happen in systems, which have itinerant ferromagnetic character. However, we conjecture that slow domain growth and spin canting could be the cause for such effect. The transport study evidences a crossover from Fermi liquid (FL) to non-Fermi liquid (NFL) behaviour around 40 K and a slope change in dρ/dT vs. T plot in the vicinity of that temperature. Astonishingly, we observe two distinct dips (one around ferromagnetic ordering temperature and the other far below the ferromagnetic ordering temperature) in the temperature dependent MR response. In addition, we also observe the signature of an unusual dip in the temperature dependent coercive field towards low temperature side. The emergence of such unusual magnetic and transport response is strongly believed to be connected with hidden magnetic interactions. Our effort on neutron diffraction study has been able to trace the cause of such cryptic magnetic interaction. The findings of neutron diffraction study evidence the change in the unit cell lattice parameters around 75 K and that could be the central cause behind such anomalous low temperature magnetic responses. It also demonstrates that the octahedral tilt freezes around the FM transition and has a minimum around the low temperature glass transition temperature. Most remarkably we observe a decline in the total integrated magnetic intensity towards the low temperature side indicating the presence of antiferromagnetic like interaction in SrRuO3. Chapter: 5 resolves the ambiguity in determining the crritical exponents in SrRuO3. Most remarkably, the application of scaling law in the FC magnetization leads a systematic change in the values of critical exponent with the measuring field in SRO. The β value changes from 0 to o.44 to to 0.29 (corresponds to mean field to Ising) with the increase in the measurement field from 10 to 2500 Oe. However, the H→0 extrapolation fields β=0.5. In order to substantiate the actual nature, the critical behavior is studied across the phase transition from the M-H isotherms. The critical analysis yields a self-consistent β, γ and δ values and the spin-spin interaction follows long range mean field δ=γ β model 1+. The critical exponents also obey Widom scaling law: δ = 1 + γ β-1 The universality class of the scaling relations is verified where the scaled m and scaled h collapses into two branches. We have also found that Ru deficiency does not affect the nature of the spin-spin interaction (though ferromagnetism gets reduced). Further the directional dependence of the critical exponent reflects the isotropic nature of the magnetic interaction. In other words the spin-spin interaction found to be: i) three dimensional, ii) long range, iii) mean field type and iv) isotropic in SrRuO3. We have also found magnetocaloric effect (calculated from the M-H isotherms) that across the phase transition. The specific heat measurements find sharp jump at the ferromagnetic transition due to the magnetic contribution of the specific heat. Chapter: 6 describes the magnetism at the SrRuO3 (SRO)/LaAlO3 (LAO) interface where SRO is an itinerant ferromagnet (FM) and LAO is non-magnetic (NM) (rather diamagnetic). Most surprisingly SRO/LAO exhibits pronounced exchange bias (EB) effect realized by observing a shift in the field cooled M-H hysteresis. Further investigation results an increasing trend of the strength of the EB with the decreases in the thickness of ferromagnetic layer. This system also displays the training effect which essentially confirms that this effect is due to EB. EB arises due to the uncompensated spins at the FM/AFM interface hence the EB effect in SRO/LAO system is unconventional. However, the origin of such AFM interaction (responsible for EB effect in FM/NM system) at SRO/LAO interface is realized and explained through the temperature dependence of the EB effect. Further, we have extensively investigated EB effect in other analogous ferromagnets, FM/FM bilayers and FM/FM superlattices. We found that La0.7Sr0.3MnO3 (LSMO) grown on LAO exhibits the signature of EB. In contrast to that La0.5Sr0.5CoO3 (LSCO) does not show any signature of EB. All the bilayers (LSMO/SRO, LSMO/LSCO and LSCO/SRO) exhibit EB and have similar kind of temperature dependence. In order to gain more insight we have grown a (LSMO/SRO)8 superlattice and observed a complex magnetic behaviour. It exhibits partial inverted magnetic hysteresis. But the system shows EB effect characterized by the shift in the FC hysteresis and training effect. All these observations essentially demonstrate that the magnetic nature of various ferromagnetisms at the interfaces can be changed by choosing a proper partner (acts like adding perturbations into one of those system which lies close to the instability region). Chapter: 7 presents the magneto-transport properties of three SRO films grown on LAO (100) of thicknesses of 12, 24 and 48 nm are studied extensively. For a one to one comparison one of the sample is also grown on STO(100). The coercivity vs. temperature in SRO(48 nm)/LAO exhibits a plateau at ~40 K. The dR/dT exhibits the low temperature hump in all the samples which very much replicates with the bulk scenario that we observed in SRO. Most strikingly the 12 nm SRO sample exhibits NFL behaviour throughout the temperature range of measurement (10-150 K). Our careful investigation reveals a cross-over from FL to NFL in all SRO thin films. The cross-over temperature increases with the increase in thickness and eventually shifts towards the bulk cross-over value. It is apt to remind that in bulk SRO we have demonstrated (by employing temperature dependent neutron diffraction) that there is a presence of antiferromagnetic like interaction at low temperature giving birth to glassiness in bulk SRO. Further, an attempt is made to understand the low temperature magneto-transport anomaly by looking into the spin fluctuation through the low frequency 1/f noise measurements. It conveys a message that there are two types of magnetic ordering present in SRO giving rise to two peaks in the temperature dependence of the relative variance. Application of magnetic field suppresses both the peaks in the relative variance. This certainly indicates that the origin of such peak is caused by the spin fluctuations and thereby it is of magnetic origin. Further we have looked into the Hall effect of a structured (Hall patterned) SRO thin film and observed regular Hall effect (RHE) as well as anomalous Hall effect (AHE) in it. Most remarkably the temperature dependence of the RHE coefficient changes its sign close to the ferromagnetic transition temperature of SRO. This implies a change of the type of the carrier as the temperature is varied. Based on these results, the carrier concentration of SRO as a function of temperature is determined. Chapter: 8 is about the magnetic and magnetotransport studies on the successfully grown high quality S/F heterostructures. The oxygen content plays a vital role in superconductivity of oxide materials thus for studying FM/SC interplay in oxides we have discussed how to achieve a high quality sample (oxygen stoichiometric). We have observed a great influence of a FM in suppressing the superconductivity in YBa2Cu3O(7-δ) (YBCO) in FM/SC heterostructures. The analysis of the out of plane M-H hysteresis reveals a significant reduction of the critical fields (HC1 and HC2) of the SC (in SRO/YBCO bilayer) which might have a great significance to understand the superconductivity in a better way (from both the perspectives: theory and experiments). Most remarkably we have found 40% enhancement of the critical current density of YBCO in SRO/YBCO bilayer. We have demonstrated that in order to see the effect of spin polarizes quasiparticle (SPQP) injection into YBCO, one should not apply more than 20mA current since Joule heating contribution wins over pair breaking effect. The SPQP injection from SRO into YBCO exhibits pair breaking effect as the TC (of the SC) shift follows I2/3 law. The resistive transitions under various applied magnetic fields and the field dependence of the activation energy confirms that the vortices are in the 2D regimes (it follows power law, U0~Hα withα=0.5) in SRO/YBCO. To get a better insight into the FM/SC interplay we have looked into two of the FM/YBCO combinations (LSCO/YBCO and LSMO/YBCO). We observe that the degree of the spin polarizations of the FMs scales with the suppression of superconductivity in YBCO which means more the spin polarization more is the suppression. We have also found out that spin polarization is not the sole parameter in suppressing superconductivity in SRO/YBCO bilayers. It also depends upon the state of magnetization of the ferromagnet. Further, we observed a significant reduction (one order) of the activation energy in LSCO/YBCO compared to SRO/YBCO which clearly indicates that the vortex dynamics might depend on other aspects as well (of the FM). It also reveals the formation of decoupled pancake vortices (pure 2D regime) in LSCO/YBCO and LSMO/YBCO bilayers whereas in case of YBCO and SRO/YBCO it is of 2D coupled type. Chapter: 9 summarizes the whole work presented in this thesis. It also discusses about few research problems which one need to look at in future.