M.Ing. / Stochastic analysis of water distribution systems allow the performance of systems to be evaluated under more realistic conditions that involve both deterministic and probabilistic factors. A software package called Mocasim II has been developed to perform stochastic analysis on water supply systems. This allows the relationship between the reliability of the supply system and the capacity of its service reservoir(s) to be quantified using Monte Carlo analysis. In a Monte Carlo analysis the factors which influence the reliability of the system such as water demand, fires, and pipe failures are simulated stochastically over a long period of time. A reliability-capacity relationship is quantified by analysing the failure behaviour of different service reservoir sizes. A previous version of Mocasim used a simple mass balance model for calculating the flows in simple, linear distribution networks. Mocasim II extends the functionality of its predecessor by enabling the probabilistic modelling of more complex water distribution models. This was achieved by integrating the stochastic modelling technique into the Epanet hydraulic analysis software package. Mocasim II was designed using an object-oriented model which has various advantages such as ease of programme testing, upgrading and maintaining as well as minimum repetitive code and a logical structure. Additional capabilities of Mocasim II include the determination of probability distributions for network properties such as flow rate, pressure and water quality at any node in the network. This will assist in estimating the levels of service of a water supply system. This project focussed on developing sections of Mocasim II to be integrated with existing software such as Mocasim I, the Epanet hydraulic engine, OOTEN, and a random number generator. The software was tested thoroughly. This involved testing each class separately as well as applying it to a test case which is a simple network consisting of a source, reservoir and demand node. The theoretical background of the stochastic model has been investigated and various aspects discussed. Various case studies in Windhoek-Namibia, Mabeskraal-South Africa and an Epanet design example demonstrate the capabilities of the software and benefits of a stochastic analysis. A workbook to be used in addition to the software's help facility has been developed.

D. Tech. (Department of Civil Engineering and Building, Faculty of Engineering and Technology), Vaal University of Technology / Growing demand for water due to increasing populations, industrialisation and water consuming lifestyles puts stress on existing water supply systems. To cater for the rising demand, water distribution networks are expanded beyond their design capacities and this creates transient “low-pressure-open-channel flow” (LPOCF) conditions. Current water supply models use “demand driven approach” (DDA) methodology which is not able to simulate transient LPOCF conditions, that poses an impediment to management/analysis of pressure-deficient networks. With a case study of the water supply network of Kampala City, LPOCF conditions were studied in this research. A “pressure/head driven approach” (PDA/HDA) was used in order to determine what demand is enabled by particular nodal pressures. Conversion of free surface to pressurised flow was analysed and modelled, with a view to clearly understanding occurrence of this phenomenon. The research demonstrated that if adequate pressures and flows are to be maintained, effectiveness of the water distribution network should be given as much attention as water production capacity. The research also indicated that when network pressures are low, the head-driven approach to water distribution modelling gives more accurate results than the traditional demand-driven methodology. Coexistence of free-surface and pressurised flow in networks prone to LPOCF conditions was confirmed and modelled. Results obtained highlighted the advantages of developing fully dynamic and transient models in the solution of transient LPOCF conditions in water distribution networks. Models developed allow application of PDA/HDA and DDA methodologies in systems that may exhibit LPOCF conditions thus enabling identification, understanding and analysis of the status of all sections of the network. These culminated in the development of a DSS to guide operational decisions that can be made to optimise network performance.

A study conducted by the World Health Organization and United Nations Children's Fund, concluded that approximately 768 million people worldwide are not receiving sanitary drinking water suitable for consumption. While there are many water treatment methods, lime softening proves to be one of the more effective approaches as it removes a wide variety of harmful compounds including arsenic, lead, mercury, and cadmium under the correct conditions. The greatest issues with lime softening on a smaller scale include the complexity of the chemistry and need for monitoring. By designing the system for groundwater sources and with a smaller capacity, this thesis hoped to reduce the level of monitoring, chemical expertise, and cost needed for operation. While promising results occurred in the removal of arsenic and total hardness, this project was unable to obtain consistent results and final water samples with pH values between the recommended standard of 6.5 to 8. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2015. / FAU Electronic Theses and Dissertations Collection

In Turkey with increasing energy demand by industrialization and urbanization, hydropower seemed to be the most environmental friendly and sustainable solution for the problem. However, hydropower has also environmental effects especially when hydropower projects are numerous on a single river, and they use almost entire water in the river. Environmental flow as a new term became popular in media with increased density of small hydropower projects in Turkey. It is the required flow in the part of diversion for Run-off River type of hydropower plant in order to protect health of the river / in other words, to balance components of the river, including physico-chemical quality standards, surface and groundwater, geomorphological dynamics, social, economic, cultural and landscape values. In this study, an analysis utilizing hydrological (desktop) environmental flow assessment methods is prepared for Turkey, focusing on the Pazarsuyu Basin as a case study, and the results are compared with the applications done by the Governmental Institutions. Moreover, insufficient applications with regard to environmental flow assessment are given and reasons for public concerns are pointed out due to small hydropower development in Turkey.

It is an important task that design engineers in practice predict the local scour around bridge piers as accurately as possible because excessive local scour around bridge piers unbalance and demolish the bridges. Many equations have been proposed previously by various researchers, based on their experimental findings, but no general method has been developed so far due to the complexity of the topic. In the present study two new bridge pier groups were employed to investigate the inclination effect of the most upstream and downstream piers on the local scours around all piers. Total of 72 experiments have been conducted with 3 inclination angles, one of which representing the vertical case, each experiment lasting 6 hours, under uniform flow and clear-water conditions for a range of water depths and flow velocities on the uniform bed material. It is clearly observed and measured that the amount of local scour reduces substantially by the effect of inclination in the group piers, especially the reduction in the scour around the most upstream pier is found notable. Based on the experimental data, regression analyses are made and an empirical scour depth equation is developed for each individual pier in the pier groups studied. Comparisons with the similar studies performed by other researchers have been made and the results discussed.

The need of water and the limited sources, force the researchers to find the most economical and feasible solution in the design of a water distribution network. In this study, reliability and optimization of a water distribution network are taken into account together in the design stage of the network. The relationship between reliability of a water distribution network and its cost is examined during the design of a water distribution network. A methodology for deciding the reliability level of the selected design is proposed by examining the reliability-cost relationship. The design alternatives for the case study area are obtained by the aid of a commercially available software WADISO employing partial enumeration optimization technique. The reliability value for each of the design alternative is calculated according to Misirdali (2003)&rsquo / s adaptation based on the methodology proposed by Bao and Mays (1990) by the aid of a hydraulic network solver program HapMam prepared by Nohut&ccedil / u (2002). For purposes of illustration, the skeletonized form of Ankara Water Distribution Network subpressure zone (N8-1) is taken as the case study area. The methodology in this study, covering the relation between the reliability and the cost of a water distribution network and the proposed reliability level can be used in the design of new systems.

For a bridge engineer, it is very important to estimate the maximum scour depth around the piers as accurately as possible, in order to design the footing safely. Many experimental studies have been performed by several investigators until now, in order to obtain information about scouring mechanism. The aim of this experimental study is to examine the effect of inclination of the dual bridge piers on scour depth. The experiments have been conducted with dual pier models under clear-water conditions, for various uniform flow depths. Scour depths had been measured at four different points around the piers / namely upstream and downstream faces of both piers. Dimensional and non-dimensional scour curves have been developed and presented to show the temporal variation of scour depth. The depths of local scour around inclined piers have been observed to be smaller than the scour depths around vertical piers.

Water distribution networks are being designed by traditional methods based on rules-of-thumb and personal experience of the designer. However, since there is no unique solution to any network design, namely there are various combinations of pipes, pumps, tanks all of which satisfy the same pressure and velocity restrictions, it is most probable that the design performed by traditional techniques is not the optimum one. This study deals how an optimization technique can be a useful tool for a designer during the design to find a solution. The method used within the study is the partial enumeration technique developed by Gessler. The technique is applied by a commercially available software, i.e. WADISO SA. The study is focused on discrepancies between a network designed by traditional techniques and the same network designed by partial enumeration method. Attention is given to steps of enumeration, which are basically grouping of pipes, candidate pipe size and price function assignments, to demonstrate that the designers can control all the phases of optimization process. In this respect, special attention is given to price functions to show the effect of them on the result. The study also revealed that the cost of fitting materials cannot be included in the price function although it may have significant effect in a system composed of closely located junctions. The results obtained from this study are useful to show that although optimization methods do not provide a definite solution / partial enumeration method can assist designers to select the optimum system combination.

This dissertation reflects on both the analysis of quality indicators for the identification of competencies and on the classification tools used to place German further vocational training courses into existing qualification frameworks, using the example of the field of engineering and study path “Supply Engineering”. The objective of this dissertation is to develop a competence model for “planning competence” that allows evaluation and classification of a range of competencies. This planning competence is determined by the categories “complexity”, “cross-linkage”, and “quality” of the process followed in the creation of certain planning documents. Of special focus in this dissertation is the planning competence and its (sub-)competencies exhibited by the college graduates in the study path “Supply Engineering” at the State College for Construction, Business and Logistics (State College) in Gotha / Thuringia. This planning competence ought to be evaluated, classified and placed into a qualification frame such as the European Qualification Frame (EQF). In order to do this, quality indicators are developed and applied to tender documents for a drinking water supply system in a kindergarten, which were presented by the college graduates as their final project. Using these indicators it is possible to identify the quality of these documents and consequently identify the planning competence of the future planning engineer. The quality of the plans is evaluated as a category and they are also looked at to see if they have a certain complexity. This category of complexity is defined as interconnected layers within a system, for example, regarding hot and cold water systems or the circulation water system. Cross-linkage is the third category, which determines both the planning of the project and the resulting planning competence. This cross-linkage is defined as the connection of the drinking water system to third parties, for instance to other planning projects, planning partners, or other technical systems such as heating or electrical systems. In addition, surveys among college graduates from the State College Gotha, their employers, and college alumni, shall indicate and bring to light certain competencies necessary for the planning of above mentioned systems and work as a planning engineer. Combining both the identified competencies of the exploration process using the above mentioned quality indicators and the results of the surveys, the author makes suggestions on how to classify and place the study path “Supply Engineering” at the State College Gotha / Thuringia and other German further vocational training courses into the EQF.

Errata sheet pasted onto front end-paper. / Bibliography: leaves 357-377. / xxvi, 514 leaves : ill. (some col.), fold. maps ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Thesis (Ph.D.)--University of Adelaide, Dept. of Civil and Environmental Engineering, 1999?