In this dissertation, I have verified that the striking purple color of the intermetallic compound AuAl₂, also known as purple gold, originates from surface plasmons (SPs). This contrasts to a previous assumption that this color is due to an interband absorption transition. The existence of SPs was demonstrated by launching them in thin AuAl2 films in the Kretschmann configuration, which enables us to measure the SP dispersion relation. I observed that the SP energy in thin films of purple gold is around 2.1 eV, comparable to previous work on the dielectric function of this material. Furthermore, SP sensing using AuAl₂ also shows the ability to measure the change in the refractive index of standard sucrose solution. AuAl₂ in nanoparticle form is also discussed in terms of plasmonic applications, where Mie scattering theory predicts that the particle bears nearly uniform absorption over the entire visible spectrum with an order magnitude higher than a lightabsorbing carbonaceous particle. The second topic of this dissertation focuses on plasmon enhanced fluorescence in gold nanoparticles (Au NPs). Here, I investigated the distance-dependent fluorescence emission of rhodamine green 110 fluorophores from Au NPs with tunable spacers. These spacers consist of polyelectrolyte multilayers (PEMs) consisting of poly(allylamine hydrochloride) and poly(styrene sulfonate) assembled at pH 8.4. The distance between Au NPs and fluorophores was varied by changing the ambient pH from 3 to 10 and back, which causes the swelling and deswelling of PEM spacer. Maximum fluorescence intensity with 4.0-fold enhancement was observed with 7-layer coated Au NPs at ambient pH 10 referenced to pH 3. The last topic of this dissertation examines a novel approach to assemble nanoparticles, in particular, dimers of gold nanospheres (NSs). 16 nm and 60 nm diameter NSs were connected using photocleavable molecules as linkers. I showed that the orientation of the dimers can be controlled with the polarization of UV illumination that cleaves the linkers, making dipolar patches. This type of assembly provides a simple method with potential applications in multiple contexts, such as biomedicine and nanorobotics. / PHD / This dissertation covers three related topics. The first is an investigation of the optical properties of the unusually colored purple gold, which is a blend of gold and aluminum with the chemical formula is AuAl₂. This compound is interesting in that the origin of this color is different from most other metals. In the case of gold, for example, the metal gold is yellow color by absorbing the blue component from white light, leaving behind yellow color reflected light. The blue light is absorbed by electrons that change their state from a lower energy to a higher one. In purple gold, the color results from a different phenomenon known as “surface plasmons.” Surface plasmons are waves consisting of many electrons that move back and forth near an interface between a metal and an electrical insulator. The energy of surface plasmons in purple gold is low and corresponds to the purple color in this compound. Recently, published theoretical work supports the possibility of surface plasmons in purple gold. In this dissertation, I experimentally verify the presence of surface plasmons in purple gold. To launch surface plasmons, light was reflected off of a purple gold film deposited on the hypotenuse of a prism with varying angles of incidence. Surface plasmons can be observed by the sudden dimming of reflected light. From this, I was able to extract the surface plasmon dispersion relation, which is the relation between the inverse of the wavelength and the energy of the surface plasmons. In addition, I computed the light absorption properties of purple v gold when it is used in a nanoparticle form. The computational result showed that small purple gold nanoparticles absorb light very well, which may be useful in photothermal cancer therapy and solar steam generation. The second dissertation topic comprises a study of fluorescent molecules. These are compounds that reemit light with a different and redder color than the color of the light that illuminates them. In this experiment, green fluorescent molecules were placed near the surface of gold nanoparticles to observe how the brightness of the light emission is affected by the distance between the molecule and the metal. The underlying mechanism is based on localized surface plasmon resonances in gold nanoparticles. Localized surface plasmon resonances are waves consisting of many electrons that oscillate inside the particle, and they only occur when light at certain frequency illuminate the particle. On the resonance, the particle also exhibits the brighter light around the particle’s surface but the dimmer light away from the particle’s surface. The light enhancement from the particle can change the light emission of the fluorescent molecules. If the fluorescent molecules were placed in the range of localized surface plasmon resonances, the light emission is increased owing to the brighter light from the particle. However, if the fluorescent molecules were placed further away from the range of localized surface plasmon resonances, the light emission is decreased owing to the dimmer light from the particle. The distance between the surface of gold nanoparticle and the fluorescent molecules was varied by wrapping the gold particles with ultra-thin films of different plastic polymers before attaching fluorescent molecules to the surface of the films. These polymer films have the property that they swell and shrink when the acidity and basicity of the solution of gold particles changes, which allows me to vary the distance between the gold particles and fluorescent molecules. The results showed that the observed light gets dimmer when the solution is more acidic. On the other hand, the brighter light is noticed when the solution is more basic, and this observation is repeatable many times. Moreover, my work differs from other published works vi in that the particles with the polymer films are more robust and stable than the other particles. This allows more design flexibility and suggests applications in biomedical or environmental research where the particles can be used to locally measure properties, such as acidity in confined spacers such as living cells. It may be possible to use this technique for tumor cells in our body or toxic pollutants in the air or water. The last dissertation topic involves assembling nanoparticles to build them into larger structures. In this experiment, I fabricated particle dimers that consisted of two gold nanospheres of different sizes. They were attached together by using small molecules that are sensitive to ultraviolet (UV) light, where these molecules allow small gold nanospheres to be attached to large gold nanospheres only in those locations on the large nanospheres that have been illuminated with a sufficient amount of UV light. To achieve this alignment, UV light with a linear polarization (a specific electric field direction) was used to select the area on the large nanospheres where the UV light was particularly intense and therefore able to break the molecules, leaving positively charged surface patches on the spheres. This results in the electrostatic attraction between the positive patches on the large gold nanospheres and the negatively charged small gold nanospheres. With this method, I was able to make dimers of nanospheres in a preferred alignment by changing the polarization of UV light. The experimental results showed a good yield of dipolar patches, which allows multifunctional nanostructures with applications in nanomedicine, optical sensing, nanoelectronics, etc.

Le sujet de ma thèse est l’étude de la diffraction par des trous sub-longueur percés dans des films métalliques, ainsi que la compréhension du rôle des plasmons de surface (SPs) dans la diffraction en champ lointain. Nous avons construit un goniomètre « fait maison » de haute qualité. Une série de trous unique percés dans un film opaque et variant continûment de k • r >> 1 à k • r << 1 ont été explorées. Ici, k est le vecteur d'onde de l'onde incidente et r est le rayon du trou. Les résultats expérimentaux indiquent que la diffraction de la lumière par un trou unique peut être séparée en quatre régimes, dépendant de la polarisation incidente. Une expression analytique simple révèle pour la première fois, l’implication de deux facteurs compétitifs: l'un lié aux plasmons de surface, et l'autre provenant du couplage du champ aux modes de guide d'onde de l'ouverture. Lorsque le trou est entouré par des corrugations concentriques (structure d'oeil de boeuf), et est illuminé avec les rainures sur le côté de sortie, l'effet de collimation est observé: la diffraction en champ lointain est confinée dans un très petit angle solide. L’influence des paramètres géométrique sur la figure de diffraction de l’œil de bœuf a été étudié et des motifs de diffraction dont la largeur est inférieure à 1 ° dans le champ lointain ont été atteints. Un autre mode de surface (CWs), différent des SPs, a été étudié sur des films de tungstène. Il a été démontré que les CWs permettent également d’obtenir un effet de collimation. À titre de comparaison, nous avons montré que la transmission exaltée est bien plus faible pour les CWs que pour les SPs sur nanostructures. / The theme of my thesis is to investigate the diffraction behavior of subwavelength holes in metal films, and to understand the surface plasmons’ (SPs) role in aperture far-field diffraction. We have built a home-made goniometer setup with high-level quality. A series of single hole continuously ranging from k•r>>1 to k•r<<1 in a flat opaque film were explored, where k is the wavevector of the incident wave and r is the radius of the hole. The experimental results indicated that the diffraction of single hole can be classified into four regimes, depending on the input polarization. A simple analytical expression reveals for the first time the subtle interplay of two competing factors: one related to surface plasmon excitation and the other originating in the coupling of the field to the waveguide mode of the aperture. When the hole is surrounded by concentric grooves (bull’s eye structure) and is illuminated with the grooves on the output side, the beaming effect occurs: far-field diffraction is confined in very small solid angle. The effects of geometrical parameters on bull’s eye diffraction have been studied and the diffraction patterns with the width less than 1° in the far field have been achieved. Another surface waves (CWs) different from SPs on tungsten films were studied. It was demonstrated that the CWs have beaming effect as well. By comparison we showed that CWs display much weaker enhancement in transmission than SPs through nanostructures.

The theme of my thesis is to investigate the diffraction behavior of subwavelength holes in metal films, and to understand the surface plasmons' (SPs) role in aperture far-field diffraction. We have built a home-made goniometer setup with high-level quality. A series of single hole continuously ranging from k*r>>1 to k*r<