Global ETD Search

101	Motokolo se spalovacím motorem a elektrickým přenosem výkonu / Bycicle with Combustion Engine and Electrical Transfer of Power Mazálek, Tomáš January 2017 (has links) The objective of this semester thesis is design of the control algorithm, needed control and power circuits and PCB design for the unfinished bicycle concept with a combustion engine and electric power transmission. The control algorithm had to be designed to make efficient use of the combustion engine performance and to minimalize the fuel consumption and noise level of the device. All circuits are fully implemented by analog components for which were designed printed circuit boards using program Eagle and this boards were revived and debugged.
102	Návrh rotujícího usměrňovače pro synchronní generátor / Design of rotating rectifier for synchronous generator Skurka, Tomáš January 2018 (has links) This diploma thesis is focused on the design of a rotating rectifier for a synchronous generator. Based on defined requirements, the new rotating rectifier concept has been created that allows a greater current range than existing rectifier used by Siemens Electric Machines s.r.o. The thesis is divided into five parts. The first part deals with the search of existing rotating rectifiers and other design possibilities. The requirements for the rotating rectifier were defined in the second part of the thesis. The following section deals with both electrical design of rectifier elements and varistors. The fourth part of the diploma thesis describes the thermal analysis. On the basis of thermal analysis the operating conditions of the rotating rectifier were determined. The last part of the thesis is devoted to mechanical and modal analysis. Based on these analyses, the strength and operability of the new rotating rectifier concept were verified.
103	Alternativní zdroj elektrické energie na železniční trati / Energy harvesting generator for train track side Pribulla, Daniel January 2018 (has links) Cieľom tejto práce bolo navrhnúť alternatívny zdroj energie pre riadiacu jednotku, ktorú obsahujú komponenty traťového zabezpečovacieho zariadenia v rámci európskeho systému riadenia železničnej dopravy. V porovnaní s predchádzajúcimi harvestormi bola vďaka použitiu lineárneho elektrického generátora eliminovaná mechanická väzba, ako napr. prevodovka. To by malo zvýšiť životnosť a spoľahlivosť zariadenia. S pomocou analógie magnetických obvodov a softvéru využívajúceho metódu konečných prvkov FEMM a Ansys Maxwell, boli navrhnuté tri rôzne synchrónne generátory s permanentnými magnetmi. Simulácia v prostredí Matlab Simulink dokázala, že výsledný návrh generátora je schopný dodávať priemerný výkon 5 W počas prechodu vlaku zo stlačenia pražca väčšieho ako 2 mm.
104	Posouzení připojitelnosti nového zdroje do sítě 110 kV / Assessment of connectivity of the new source to the 110 kV network Kopečný, David January 2019 (has links) This thesis focuses on the connectivity problems of the new sources to the electrical network. The first part of the thesis deals with the description of the new source and the method of its connection to the electrical network. Furthermore, in work, there are elaborated the blocking conditions for substation TR Neratovice expanded distribution point. A distribution network operator must receive an attachment application for connecting before the actual connection. The attachments consist of study cases of conjunction that values the inverse influence on the distributional network and informs the operator about the required measures for the reliable service with the new source. PSS Sincal computer software was used to survey the inverse influences on the distributional network. Based on processed data, the evaluation of conjunction of the synchronous generator to the grid at TR Neratovice substation was reconsidered.
105	Zkušební pracoviště synchronních generátorů / Testing stand of synchronous machines Král, Michal January 2015 (has links) This diploma thesis deals with a part of synchronous generator testing stand project. Thesis is focused on drive part of testing stand, the appropriate drive is chosen according to type of the tests. The attention is mainly on drive control, specifically on the configuration of frequency converter and software programming of the converter control in NI LabVIEW. Software also contains drive simulation program. Testing stands are sequentially installed and commissioned.
106	Jízdní kolo s elektrickým motorem a benzinovou elektrocentrálou / Electric bike with a combustion-engine-powered generator Mička, Dominik January 2015 (has links) A conceptual design and realization of a motor bike using combustion engine and electrical power transfer is the objective of this master´s thesis. Control strategy that allows combustion engine to reach maximal efficiency cooperating with wide range speed and torque operating area electromotor was created. All function blocks were realized. Also hardware of all needed parts was developed. The last part was a design and debugging of control software. Finally the functionality was documented by test drives and measurements.
107	Model větrné elektrárny pro výzkumné a laboratorní využití / Wind Turbine Model for Research and Laboratory Applications Števček, Tomáš January 2015 (has links) A major portion of this thesis is devoted to the Whisper 200 wind turbine model in Matlab-Simulink environment. The turbine is installed at the Department of Electrical Power Engineering, FEEC BUT. In the model, several types of simulations can be executed. On that basis, the power curve and mathematical relationships between wind speed and other physical quantities, such as RPM, electic current, and voltage, were obtained. Comparisons of the simulations' results with measurement data illustrate adequate agreement, but limitations of the model remain significant, as is exhaustively documented and commented upon in the thesis. As a partial advancement towards elimination of the model's deficiencies, conditions for substantial performance improvements of the dynamic simulation have been elaborately derived.
108	Analýza kostry synchronního generátoru / The analysis of frame synchronous generator Marada, Ondřej January 2011 (has links) The thesis is focused on the examination of the utility of a synchronous generator of a small hydroelectric power station in the case of a change of working position of the machine. The utility will be measured on the basis of the examination of deformations and state of stress of the frame of the generator for the present running (with vertical axis of rotation of the generator) and subsequently for modified running (with horizontal axis of rotation). This will be accomplished partly on the static shell model by finite element method and consequently on the simplified dynamic model.
109	Deformačně napěťová analýza synchronního generátoru / Stress strain analysis of a synchronous generator Majdič, Petr January 2015 (has links) This master thesis deals with an impact of particular static and dynamic forces and temperature strain on horizontal synchronous generator. In connection with this, a stress distribution in construction and an assessment of security to terminal state of flexibility and weariness is being solved together with finding the most critical places on horizontal synchronous generator.
110	ANALYSIS AND MITIGATION OF FREQUENCY DISTURBANCES IN AN ISLANDED MICROGRID Mondal, Abrez 03 August 2017 (has links) No description available. Electrical Engineering distributed energy resources energy storage frequency response frequency restoration governors load management micro grids nadir frequency natural gas gen set power system modeling smart grid synchronous generator under-frequency load shedding

Search results