In this study, we design and fabricate novel tag antennas, which can be used on the metallic surface for radio frequency identification systems. We first focus on the effects when the antenna is placed on the metallic surface. Based on the simulation results, we investigate how the parameters of the antennas are affected. The helps us find solutions to reduce the effects when the antennas are placed on the metallic surface. In order to conform to the IC chips of RFID and reduce the influence of metal objects, we use the structure of the dipole antenna is used as the basis of the novel tag antenna design. And we employ the high impedance surface periodic structure which behaves similarly to a perfect magnetic conductor in the design of the novel tag antenna. The novel tag antenna is able to work normally when it was attached on the surface of the carton or metallic object. Finally, the tag antenna is fabricated and measured in a chamber. The measured results agree with simulated ones well.

ABSTRACT In this study, the properties of the high impedance surface structure are studied. We proceed to design the low profile and miniature high impedance surface structure. In order to conform to the IC chips of RFID and reduce the influence of metal objects, we add a layer of electromagnetic band-gap (EBG) structure on the back of the antenna. The EBG behaves as a high impedance surface, similar to a perfect magnetic conductor. This property of the EBG structure is able to isolate the antenna and backside environment and reduce the metallic effect. In order to achieve the requirements of small size and low cost on RFID tag antenna, we design the miniature, low profile and low cost high impedance surface structure. In this study, we use the slots and chip capacitance to miniaturize the dimension. Both approaches can reduce the influence of metallic objects. Although using slots can reduce the metallic effect, it does not have the advantage of low profile. Using chip capacitor can miniaturize the dimension and reduce metallic effect effectively. It also has advantages of low profile, low cost and low sensitivity to the frequency of the tag antenna. Finally, the high impedance surface structures are fabricated and measured when they combine with the tag antenna attached to the metallic object. The measured results agree with simulated ones well.

In this thesis, we propose the method to design tag antennas, which are suitable for radio frequency identification system. The fact that the tag antennas design comes with single layer printed circuit board can achieve cost down of the antennas. For the tag antennas, the aim is to design the RFID tag antenna operating in 860¡V960 MHz which are suitable for both the near- and far-field operations worldwide. The method we use to design tag antenna is the dual loop form with Bow-tie antenna, and we focus on the impedance conjugate matching between the RFID strap and antenna to increase impedance bandwidth and improve reading performance. We can adjust parameter to be suitable for different RFID strap in the design framework. The dual loop structure carries out power coupling efficiently in the near field and can allow the RFID strap to work even in the weak EM wave. According to the result of power coupling simulation, we analyze and discuss which factor will affect the reliability of the identification. Such reliability will help to build RFID system.

In this thesis, the design rule of the tag antenna and the properties of the high impedance surface structure are studied. We proceed to design the low profile and miniature high impedance surface structure. In order to be more competitive, we use PCB plates for fabrication to reduce the cost. The tags are intended to be placed inside two shorted metallic plates. In order to reduce the effect of the two parallel metallic plates, we use the slots to design the tag antenna. The EBG structure behaves as a high impedance surface and suppresses the surface wave. We add the EBG structure on the back of the antenna to reduce the back metallic effect. We use slot structure to design the non-planar RFID reader antenna that can be placed inside the three metallic plates to read the data. For the slot structure design, the electric field between the slots is perpendicular to the upper and lower metallic plates. According to the image theory, the induced image current will result in constructive effect to reduce the metallic effect. Finally, the hand-held RFID reader may not identify the RFID tag as the RFID tag placed at position deeper inside. The proposed non-planar reader can solve this problem to be used for more applications.

No description available.

An ID generating circuit is unquestionably the core of a chipless RFID tag. For convenience of printing process and cost consideration, the circuit should be kept as simple as possible. Based on the cognition, an 8-bit time-domain based ID generating circuit that merely consists of a ML and eight capacitors was offered, and implemented on photo-paper substrates via inkjet printing process. In addition to the experimental measurements, the circuit was also input into circuit simulators for cross-validation. The good agreement between simulations and measurements is observed, exhibiting the tag technical feasibility. Besides of low cost, the tag has wide compatibility with current licensed RFID spectrum, which will facilitate the future deployment in real applications. Compared   to  time-domain   based  chipless   tags,  frequency   signatures   based chipless RFID tags are expected to offer a larger coding capacity. As a response, we presented a 10-bit frequency-domain based chipless RFID tag. The tag composed of ten configurable LC resonators was implemented on flexible polyimide substrate by using  fast  toner-transferring  process.  Field  measurements  revealed  not  only  the practicability  of  the  tag,  but  also  the  high  signal  to  noise  ratio  (SNR).  Another frequency domain tag consists of a configurable coplanar LC resonator. With the use of all printing process, the tag was for the first time realized on common packaging papers.  The tag feasibility was confirmed by subsequent measurements. Owing to the ultra-low cost potential and large SNR, The tag may find wide applications in typical RFID solutions such as management of paper tickets for social events and governing of smart documents. Ultra wide band (UWB) technology possesses a number of inherent merits such as high speed communication and large capacity, multi-path immunity, accurate ranging and positioning, penetration through obstacles, as well as extremely low-cost and low- power transmitters. Thus, passive UWB RFIDs are expected to play an important pole in  the future identification applications for IoT. We explained the feature difference between  UWB  chipless  tags  and  chip  based  tags,  and  forecasted  the  applications respectively  based on the comparison  between the two technologies.  It is expected that the two technologies will coexist and compensate each other in the applications of IoT. Lastly, the thesis ends up with brief summary of the author’s contributions, and technical prospect for the future development of printable chipless RFID tags. / <p>QC 20140304</p>

The performance of commercial Radio Frequency Identification (RFID) tags is primarily limited by present techniques used for tag antenna design. Currently, industry techniques rely on identifying the RFID tag application (books, clothing, etc.) and then building antenna prototypes of different configurations in order to satisfy minimum read range requirements. However, these techniques inherently lack an electromagnetic basis and are unable to provide a low cost solution to the tag antenna design process. RFID tag performance characteristics (read-range, chip-antenna impedance matching, surrounding environment) can be very complex, and a thorough understanding of the RFID tag antenna design may be gained through an electromagnetic approach in order to reduce the tag antenna size and the overall cost of the RFID system. The research presented in this thesis addresses RFID tag antenna design process for passive RFID tags. With the growing number of applications (inventory, supply-chain, pharmaceuticals, etc), the proposed RFID antenna design process demonstrates procedures to design tag antennas for such applications. Electrical/geometrical properties of the antennas designed were investigated with the help of computer electromagnetic simulations in order to achieve optimal tag performance criteria such as read range, chip-impedance matching, antenna efficiency, etc. Experimental results were performed on the proposed antenna designs to compliment computer simulations and analytical modelling.

The performance of commercial Radio Frequency Identification (RFID) tags is primarily limited by present techniques used for tag antenna design. Currently, industry techniques rely on identifying the RFID tag application (books, clothing, etc.) and then building antenna prototypes of different configurations in order to satisfy minimum read range requirements. However, these techniques inherently lack an electromagnetic basis and are unable to provide a low cost solution to the tag antenna design process. RFID tag performance characteristics (read-range, chip-antenna impedance matching, surrounding environment) can be very complex, and a thorough understanding of the RFID tag antenna design may be gained through an electromagnetic approach in order to reduce the tag antenna size and the overall cost of the RFID system. The research presented in this thesis addresses RFID tag antenna design process for passive RFID tags. With the growing number of applications (inventory, supply-chain, pharmaceuticals, etc), the proposed RFID antenna design process demonstrates procedures to design tag antennas for such applications. Electrical/geometrical properties of the antennas designed were investigated with the help of computer electromagnetic simulations in order to achieve optimal tag performance criteria such as read range, chip-impedance matching, antenna efficiency, etc. Experimental results were performed on the proposed antenna designs to compliment computer simulations and analytical modelling.

The performance of commercial Radio Frequency Identification (RFID) tags is primarily limited by present techniques used for tag antenna design. Currently, industry techniques rely on identifying the RFID tag application (books, clothing, etc.) and then building antenna prototypes of different configurations in order to satisfy minimum read range requirements. However, these techniques inherently lack an electromagnetic basis and are unable to provide a low cost solution to the tag antenna design process. RFID tag performance characteristics (read-range, chip-antenna impedance matching, surrounding environment) can be very complex, and a thorough understanding of the RFID tag antenna design may be gained through an electromagnetic approach in order to reduce the tag antenna size and the overall cost of the RFID system. The research presented in this thesis addresses RFID tag antenna design process for passive RFID tags. With the growing number of applications (inventory, supply-chain, pharmaceuticals, etc), the proposed RFID antenna design process demonstrates procedures to design tag antennas for such applications. Electrical/geometrical properties of the antennas designed were investigated with the help of computer electromagnetic simulations in order to achieve optimal tag performance criteria such as read range, chip-impedance matching, antenna efficiency, etc. Experimental results were performed on the proposed antenna designs to compliment computer simulations and analytical modelling.

La technologie d'identification par radiofréquence (RFID) a eu un essor très important ces dernières années notamment grâce à sa configuration polyvalente et aux innombrables possibilités d'intégration offertes par cette technologie notamment avec l'apparition d'un nouveau contexte applicatif celui des objets connectés. Depuis quelques années, des applications de la RFID UHF en champ proche ont été notamment développées afin de surmonter les problèmes liés à la dégradation de lecture des tags lorsqu'ils sont placés dans des milieux fortement perturbateurs. Les travaux de recherche présentés dans cette thèse s'intéressent à l'étude de la technologie RFID UHF en zones de champ proche et de champ lointain. Les études portent plus particulièrement sur la conception d'antennes lecteur et d'antennes tag ainsi que sur les méthodes de caractérisation des systèmes RFID en zones de champ proche et de champ lointain. Une étude sur les caractéristiques des champs rayonnées par une antenne est réalisée afin de souligner les critères les plus pertinents en vue de concevoir des antennes pour les lecteurs RFID, performantes en zone de champ proche. A partir de l'état de l'art sur les antennes tags et les méthodologies de conception classiques, une nouvelle approche de conception est développée qui vise à améliorer la conception d'antennes tags en intégrant une vision appropriée pour tenir compte du niveau de puissance espéré dans une application donnée. Enfin avec pour objectif la caractérisation des tags RFID UHF, d'une part une approche est proposée permettant l'identification de familles de tags, et d'autre part, une procédure innovante pour la mesure de l'efficacité du transfert de puissance est proposée et validée expérimentalement. / The Radiofrequency Identification technology (RFID) has had a huge growth these last years, due to its versatility and the uncountable possibilities to integrate this technology in many different application (tracking and inventory of goods, access control, supply chain, etc.), and in particular the brand new context of internet of things projects. For some years, the near field UHF RFID applications has been developed in order to overcome the problems related to degradations of tag's read range when needing to use it in a perturbing environment. The research work presented in this thesis come as a study of the UHF RFID in near field and far field zones. This study focus more particularly on the design of reader and tag antennas and on the characterization method in near field and far field zones. A study on the characteristics of fields outgoing from an antenna has been made, in order to underline the important criteria for the design of performant UHF RFID reader antennas in near field zone. From the state of art about tag antennas design and classical methodologies, we propose a new approach that aims improving the design of tag antennas in a more suitable point of view that is getting the expected power level in a given application. Finally, with an objective to characterize UHF RFID tags, we first propose a new approach enabling the identification of tag families, and then propose a new innovating power transfer efficiency measurement procedure, that has been validated experimentally.