Previous studies have shown that screens may be utilized efficiently for dissipating the energy of water. For the present study, a series of experimental works are executed to investigate the tailwater and multiple screen effects on the energy dissipation through screens. Water flowing beneath a sliding gate is used to simulate the flow downstream of a hydraulic structure. In the present study, one double screen and two double screen arrangements with porosity of 40% and inclination angle of 90 degree is used. A tailwater gate structure is used to adjust the tailwater depth. The major parameters for the present study are upstream flow depth, tailwater gate height, location of the screen together with the supercritical upstream flow Froude number for a range covering from 5.0 to 22.5. The gate opening simulating a hydraulic structure is adjusted at heights of 2 cm and 3 cm during the study. The results of the experiments show that the tailwater depth has no significant additional contribution on the energy dissipation, whereas multiple screen arrangement dissipates more energy as compared to one double screen arrangement.

Renewable energy sources are getting much more important to reduce the increasing threat coming from greenhouse gases. Hydropower is the most important source of renewable energy. However, development of a hydropower project is a challenging engineering process. Several computer programs have been developed to make initial estimations on hydropower schemes. A computer program named RETScreen Small Hydro Project Model has been developed with the objective to make complete pre-feasibility studies including costing and financial analysis. Two case studies, which have been under construction in Turkey, will be used to check the accuracy of software in Turkish practice. Then in light of the results, RETScreen software will be used to make a pre-feasibility report on an existing multipurpose dam in Turkey. Electricity can be generated at existing dams which requires minor civil works. Porsuk Dam which is a 36 year old dam used for domestic, industrial and irrigation water supply will be evaluated for energy generation by constructing a penstock, powerhouse and installing electromechanical equipment.

In the present thesis the performance of box type floating breakwaters (FBs) with screens under regular waves is examined experimentally in a wave flume. The experiments were conducted in the Coastal and Harbor Engineering Laboratory wave flume, Civil Engineering Department, Middle East Technical University, Ankara. The influence of incident wave characteristics and certain geometric characteristics, such as the width and draft of the structure, on its effciency is examined. Three different widths of the structure in combination with three different screen (draft) height, a total of nine different cases, of FBs are examined. Results related to transmission and reflection of the incident regular waves on the structure are presented. According to the results, for all structures drafts and structure widths, as h/L increase (wave period and wave height decreases) Kt values decrease. Also, Kt values obtained for chain moored floating breakwaters are larger than the Kt values of fixed cases consistently.

An impermeable weir constructed across a stream prevents the longitudinal movement of aquatic life and transportation of physical and chemical substances in water, eventually having a negative impact on river environment. However, a rubble mound weir is considered environmentally friendly, since its permeability allows the streamwise migration of aquatic life. This thesis investigates the performance of this type of weir as a water use facility. The particular objective of the investigation is to study the flow mechanism in terms of water surface profile and discharge through the weir. In the study, flow through the rubble mound weir is considered non-Darcian, steady, and one-dimensional. In the analysis, gradually varied open channel flow algorithm is applied to porous medium flow through the rubble mound weir in which laminar and turbulent components of flow are taken into consideration. Unlike previous studies where Stephenson and Wilkins relations were used, in this thesis Forchheimer equation is used. To verify the validity of numerical solution of governing equation based on Forchheimer relation, an experimental investigation is conducted in the laboratory. The experimentally obtained water surface profiles are compared with the numerical results. It is observed that there is a satisfactory agreement between numerical and experimental results. The water surface profiles obtained by numerical solution are further compared with those based on Stephenson and Wilkins relations. It is concluded that the proposed numerical solution technique for the Forchheimer based governing equation may be used in the analysis of flow through, and design of rockfill weirs.

The performance of outlets under constant head is investigated in this study. Behavior of single outlet is analyzed / subsequently effect of multiple outlets on a single outlet is examined. Parameters taken into account are constant head of water, orifice shape, orifice length, number of open outlets and discharge. The outlet type, which is examined, can be classified as a short tube orifice. Two different orifice diameters and tube lengths are used. Outlets had the diameter, 6.00 and 10.35mm. The ratio of orifice length to diameter (l/d) was 5 and 8. Number of outlets is 5, which are opened in several combinations. A dimensional analysis shows that discharge coefficient, Cd is a function of diameter-length ratio and the Reynolds Number. In this study, high Reynolds Number (2300&lt / Re&lt / 18600) range is examined and the results are compared with the available data in the literature. Furthermore, performance of the group outlets is investigated.

Siltation in reservoirs is becoming an important problem as the dams are getting older in the world. The general dam practice has been implemented in a sequence that / planning, design, construction, operation of dam until the accumulated sediment prevents its purpose function or functions. Unfortunately, effects of sedimentation and fate of the left over dams in the future are not figured. Indeed, these negative effects could be avoided, life of the reservoir can be prolonged and even the reservoir will last forever by minimizing the sedimentation. Therefore in this study, the methods that provide extension of reservoir life are discussed hydraulically, economically and applicability point of view. In addition, there is open source package program RESCON which examines and compares some sediment removal techniques economically and also hydraulically. RESCON is used in conjunction with several cases / namely &Ccedil / ubuk Dam-I, Bor&ccedil / ka Dam and Muratli Dam. Moreover, some sensitivity analyses are carried out in order to scrutiny of the program for Turkish economic conditions.

In this thesis, detailed tsunami numerical modeling study was applied to the selected case studies, Fethiye town (Turkey) and Kiparissia-Zakintos-Pylos (Greece) in Mediterranean, using rupture-specific tsunami sources which can generate tsunamis in Mediterranean. As a first step of the study, the general database of Fethiye and Kiparissia-Zakintos-Pylos were integrated to GIS-based environment to organize, analyze and display reliable data from different sources. Secondly, for each earthquake scenario, the tsunami propagation and coastal amplifications were computed by TUNAMI N3 to evaluate the coastal amplifications of tsunamis and understand the tsunami propagation for the cases. As the final step, a study of inundation areas of probable tsunamis in these regions was performed. Available results were used to understand the effects of tsunamis and assist in developing mitigation strategies. Methods and results were presented and discussed.

Sharp crested rectangular weirs used for discharge measurement purposes in open channel hydraulics are investigated experimentally. A series of experiments were conducted by measuring discharge and head over the weir for different weir heights for full width weir. It is seen that after a certain weir height, head and discharge relation does not change. Hence a constant weir height is determined. For that height / discharge and head over the weir are measured for variable weir width, starting from the full width weir to slit weir. Description of the discharge coefficient valid for the full range of weir widths and an empirical expression involving dimensionless flow variables is aimed. Experimental data obtained for this purpose and the results of the regression analysis performed are represented.

Particle Image Velocimetry (PIV) is an optical technique used to display and evaluate the motion of fine particles in a flow. In this experimental study, velocity profiles are examined by PIV system and basic analysis methods are compared.

In this study the incipient motion of coarse solitary particles on channel beds having different roughness heights was experimentally investigated. The experiments were conducted in a tilting flume of a rectangular cross-section having a working length of 12 m and a rough bed composed of at least 2 layers of coarse gravel of almost constant size. The roughness material of the channel bed was changed three times. The slope of the channel bed and the discharge are two main parameters that determine the initiation of motion of a given particle. The artificial particles tested in the experiments were obtained by mixing cement and iron dust at certain ratios. Dimensionless hydraulic parameters determined from theoretical analysis were related to each other. Flow depths, velocity profiles were measured and flow conditions that represent the critical conditions of initiation of motion were expressed in terms of critical velocities and shear velocities. The results were compared with the previous studies&rsquo / results.