La fonctionnalisation de surfaces de silicium hydrogéné par des films de molécules organiques suscite un intérêt croissant en raison des nombreuses applications potentielles (photovoltaïsme, détection chimique et biochimique, électronique moléculaire...). Dans ce cadre, nous avons cherché à greffer des tétrathiafulvalènes ou des complexes dithiolène de platine à ligand bipyridine, électroactifs, sur cette surface par hydrosilylation d’alcynes. Nous avons montré que ces composés organiques étaient bien immobilisés par une liaison robuste Si-C et nous avons noté la présence de plusieurs états redox stables et réversibles associés aux molécules greffées. Les méthodes de greffage direct et de post-fonctionnalisation de monocouches, ont permis l’obtention de films denses stables aux constantes de transfert de charge élevées. / The functionalization of silicon surfaces by thin layers of organic molecules raises increasing interest due to the large extent of potential applications (photovoltaics, chemical and biochemical detection, molecular electronics and so on). In this context, we have prepared TTF and platinum dithiolene complex-modified silicon surfaces through a hydrosilylation reaction between hydrogen-terminated silicon and alkyne-terminated precursors. We have shown that these organic compounds were covalently bound to the surface through a robust Si-C bond. We have demonstrated that the electroactivity of the grafted molecules characterized by several reversible one-electron systems was maintained after the immobilization step. Post-functionalization and direct grafting reactions lead to dense and stable films, with high values of electron-transfer rate constants.

The goal of the diploma thesis was to prepare a spectrum of electron-rich macrocyclic derivatives of tetrathiafulvalene (TTF), which should serve as electron donors in interactions with electron-deficient acceptor molecules. A two-step synthesis was used for their preparation. First, a non-cyclic three-segment precursor was prepared by a reaction of a thiolate TTF construction block with a bis(bromomethyl)aromate. Then, a reaction of this precursor with another molecule of bis(bromomethyl)derivative closed the macrocycle. The latter reaction produced mainly [2+2] macrocycles containing two TTF and two aromatic units. In most cases, larger [4+4] macrocycles were also isolated from the reaction mixture. Besides thiolate TTF unit two other thiolate units, one with extended TTF core and other with smaller trithiafulvene ring, were used analogically in synthesis. By a combination of three thiolate blocks and five bis(bromomethyl)aromates 11 three-segment components were prepared and these were converted to 11 structural types of macrocycles with [2+2] and 7 macrocycles with [4+4] stoichiometry. The resulting macrocycles were characterized by 1 H a 13 C NMR spectroscopy and analyzed by a gel permeation chromatography. Their structures were also confirmed by high-resolution mass spectroscopy. Interaction...

This thesis deals with inelastic effects in electronic currents. We developed a time-dependent technique and show that this approach gives rich insight into electron-phonon coupling during transport. We compare our results with a time-independent technique and analyse the validity of our model. Finally, the results of a quantum chemistry calculation are presented in the framework of scanning tunneling miscroscopy (STM). We study the chemisorption of a tetrathiafulvalene molecule on a gold surface by performing the calculation of the charge transfer, the induced dipole, and the STM images using the density functional theory.

Tetrathiafulvalene derivatives are remarkable molecules, with various application, reported relatively recently. The radical cation of these compounds has very inter- esting optical, electronic, electrocatalytic superconducting and magnetic properties that have been intensively studied recently. Quantitative in-situ EPR voltammetric spectroelectrochemistry studies of 2-(2-hydroxyethylsulfanyl)-3-(benzylsulfanyl)-6,7- bis(octadecylsulphanyl)tetrathiafulvalene (TTF-Der3) have been carried out with the aim to confirm the oxidation sites, follow-up reactions (after the first electron transfer), and electrochemical behaviour. The diffusion process was confirmed by the depen- dence of current on the square root of the scan rate. It was claimed that the ratio of the number of generated radicals to transferred charge (electrons) for two representative TTF derivatives was determined to 5.5:500 for and 7:500 for TTF, indicating the follow- up reactions. Experiments were performed using the commercially available EPR standards, calibrated for this method (experimental setup). The latter was validated by quantitative EPR with standard 4-hydroxy-2,2,6,6-tetramethylpiperidin-1-oxyl radical concentration (1·10−4 mol dm−3). For the ratios the confidence interval was reported for the first time for TTF-Der3 it was...

Les foldamères de type oligopyridine biscarboxamide constituent une famille d’oligomères synthétiques pouvant adopter une structure hélicoïdale et s’hybrider pour former des hélices doubles. Ce travail a eu pour objectif de synthétiser une nouvelle génération de foldamères π-fonctionnels porteurs de groupements photoactifs ou électroactifs, d’étudier les facteurs gouvernant l’équilibre entre hélice simple et hélice double, d’analyser l’impact de cet équilibre sur les propriétés optiques, et enfin de mettre en place un nouveau type de stimulus permettant de contrôler cet équilibre. Deux foldamères photoactifs dotés d’unités Disperse Red, ont été synthétisés. Leurs structures cristallographiques confirment la formation de structures hélicoïdales. Un choix précis du solvant permet d’orienter sélectivement l’équilibre vers la formation d’une hélice simple ou double.Le contrôle de l’équilibre d’hybridation par dilution permet de moduler l’activité en Génération de Seconde Harmonique du foldamère. En outre, la cavité générée par l'hélice permet la reconnaissance de divers anions. Enfin, les premiers efforts fournis pour induire une hélicité donnée à ces foldamères par voie supramoléculaire sont décrits. Par ailleurs, un foldamère électroactif fonctionnalisé par deux unités tétrathiafulvalène (TTF) a été synthétisé selon une méthodologie originale. La présence des unités TTF permet un contrôle redox inédit de la structuration du foldamère, par dimérisation de cations radicaux. Le concept a été élargi via l’immobilisation d’un foldamère sur surface d’or (SAMs). Enfin, une capsule électroactive capable de complexer l’acide tartrique a également été synthétisée et caractérisée. / Oligopyridine biscarboxamide-based foldamers constitute a family of synthetic oligomers that can fold into helical structures and hybridize to form double helices. This work aims at synthesizing a new generation of π-functionalized foldamers featuring photoactive and electroactive moieties, in order: to study the factors governing the equilibrium between simple and double helices, to analyze the impact of this equilibrium on the optical and recognition properties, and to set up a new type of stimulus to control this equilibrium. Two photoactive foldamers of different lengths and bearing two Disperse Red units were synthesized. Their crystallographic structures confirm the formation of helical structures. A precise choice of the solvent allows to drive the equilibrium towards the single or the double helix selectively.The cavity generated within the helix presents a good affinity for anions. The control over the hybridization equilibrium allows modulating the Second Harmonic Generation activity. Eventually, our first efforts to control the helicity of these foldamers through supramolecular chiral induction are described. On the other hand, an electroactive foldamer featuring two tetrathiafulvalene (TTF) units was synthesized according to an original methodology. The presence of TTF units allows an unprecedented redox control of the structure of foldamer, by dimerization of radical cations. The concept has been extended by immobilizing a foldamère on a gold surface (SAMs). Finally, an electroactive capsule capable of complexing tartaric acid has also been synthesized and characterized.

This thesis deals with the synthesis of electroactiveorganic compounds. The synthesis of ethylenedioxy-benzodioxinstri-dioxin and tetra-dioxin are described. These molecules wereprepared with the aim of creating donor molecules for cationicradical salts. The symmetric analogs of tri-dioxin,methylenedioxy-derivative and ethylenedioxy-naphthalene werealso synthesized. Three different cation radical salts with 2:1stoichiometries were obtained from tri-dioxin, whiletetra-dioxin merely provided polycrystalline materials.Tri-dioxin and tetra-dioxin were also successful as operationalmatrixes in PALDI-TOF. Tetrathiafulvalenes with the2-dialkyl-amino-1,3-dithiolium-4-thiolate mesoion asbuilding-block was also synthesized. A series of doublyalkylthiol-substituted TTFs were prepared with the aim offorming self-assembly monolayers on gold surfaces in theapplication of organic thin film field-effect transistors.Film-formation for two TTFs were studied and they providedrelatively dense packed monolayers with a discrete distance ofthe TTF moiety from the gold surface. The mesoionic compound was also for the first time used inanumpolungreaction. The electrophile obtained in situ bytreatment of mesoion with sulfuryl chloride was reacted with avariety of electron-rich aromatic compounds. From the receivedproducts three new arylthio-substituted TTFs weresynthesized. <b>Keywords:</b>Synthesis, Benzodioxin, Tetrathiafulvalene,Mesoion, Organic Conductor, Cation Radical Salt, CyclicVoltammetry, Electrocrystallization, Self-Assembly Monolayer,SAM, Organic Field-Effect Transistor, OFET

<p>This thesis deals with the synthesis of electroactiveorganic compounds. The synthesis of ethylenedioxy-benzodioxinstri-dioxin and tetra-dioxin are described. These molecules wereprepared with the aim of creating donor molecules for cationicradical salts. The symmetric analogs of tri-dioxin,methylenedioxy-derivative and ethylenedioxy-naphthalene werealso synthesized. Three different cation radical salts with 2:1stoichiometries were obtained from tri-dioxin, whiletetra-dioxin merely provided polycrystalline materials.Tri-dioxin and tetra-dioxin were also successful as operationalmatrixes in PALDI-TOF.</p><p>Tetrathiafulvalenes with the2-dialkyl-amino-1,3-dithiolium-4-thiolate mesoion asbuilding-block was also synthesized. A series of doublyalkylthiol-substituted TTFs were prepared with the aim offorming self-assembly monolayers on gold surfaces in theapplication of organic thin film field-effect transistors.Film-formation for two TTFs were studied and they providedrelatively dense packed monolayers with a discrete distance ofthe TTF moiety from the gold surface.</p><p>The mesoionic compound was also for the first time used inan<i>umpolung</i>reaction. The electrophile obtained in situ bytreatment of mesoion with sulfuryl chloride was reacted with avariety of electron-rich aromatic compounds. From the receivedproducts three new arylthio-substituted TTFs weresynthesized.</p><p><b>Keywords:</b>Synthesis, Benzodioxin, Tetrathiafulvalene,Mesoion, Organic Conductor, Cation Radical Salt, CyclicVoltammetry, Electrocrystallization, Self-Assembly Monolayer,SAM, Organic Field-Effect Transistor, OFET</p>

In case of charge-transfer complex of TTF:TCNQ lot of work had previously been done on single crystals and thin films to study various interesting properties including phase transitions which were attributed to Peierls instability. But as seen from the review of molecular wires it is clear that apart from synthesis of TTF:TCNQ in molecular wire form, not much was known about the behavior of these wires at low temperatures. There were some open questions listed below, which we tried to address in the thesis Can nanowires of TTF:TCNQ be grown across prefabricated electrodes which are separated by gaps < 1 μm. Can the nanowires grown in such smaller gaps, show Peierls transition, which is the signature of quasi one dimensional conduction. As the size and length of the grown wires are small it was expected that they will have less staking disorder as compared to the thin films. What will be conduction mechanism at low temperatures in such single/few nanowire samples. If the nanowires show Peierls transition and CDW formation at low temperatures, can nonlinear conduction be seen due to motion of CDW, if so how well do they compare with the reported results for TTF:TCNQ single crystals. In case of Cu:TCNQ it can be noted from the above review that even though much advances have been made on synthesizing good quality Cu:TCNQ films and incorporating them in novel device structures, there has been much controversy regarding conduction mechanism. There were many conflicting results in literature regarding switching in these devices. In this thesis work we wanted to address the feasibility of switching in Cu:TCNQ under reduced size of top electrodes and also address few other issues like To grow Cu:TCNQ nanowires by using vapor phase evaporation method Can resistive switching be induced in Cu:TCNQ by using a local probe STM tip (Pt-Rh) operated in high vacuum. Since the measurement will be done in high vacuum what will be the effect of environment (absence of oxygen, water vapor) on reproducibility of resistive switching. Will localized switching depend on the top electrode material. This has been probed by coating different metals on the C-AFM tip and using them as top electrode in conducting mode. With what contact force will we get reproducible resistive switching. Can a device structure be made with an array of top electrode in the form of metal dots (< 10 μm) and study switching using C-AFM. This thesis is divided into seven main chapters and two appendix chapters, which are listed below: In the present chapter 1, a detailed overview and literature survey of charge-transfer complexes TTF:TCNQ and Cu:TCNQ which were relevant to our present study was presented. This was followed by our motivation in undertaking the present work. In chapter 2 the various experimental techniques developed during the course of the thesis work such as e-beam lithography, design of the vacuum chamber for deposition of organic molecules, design of ultra high vacuum scanning tunneling microscope (UHV-STM chamber along with the STM head, modification of conducting AFM for obtaining the switching data have been described. In chapter 3 we describe the preparation of TTF:TCNQ molecular wires across prefabricated electrodes and different measurements done on the samples. In particular the observation Peierls transition in the grown nanowires of TTF:TCNQ and the nonlinear conduction mechanism involved at low temperatures will be discussed in detail. In chapter 4 we describe the preparation of Cu:TCNQ nanowires on Cu substrate using vapor phase technique. Resistive switching measurements done on the Cu:TCNQ nanowires in high vacuum with Pt-Rh tip as top electrode will be discussed in detail. In chapter 5 we describe the resistive switching measurements performed on Cu:TCNQ nanowires with different metal coated C-AFM tips as well as FIB deposited platinum dots as top electrodes. In chapter 6 we make a few comments about possible switching mechanism involved, when STM tip, C-AFM induced as well as platinum coated dots were used as top electrodes. In chapter 7 we conclude this thesis by summarizing the main results. Also we point out the scope for future work that can be based upon the results presented in this work. In Appendix A a brief review of self assembled monolayer (SAM) of alkane thiols is presented followed by details about experiments done for insitu study of growth of SAMs of decanethiol and octadecanethiol on silver substrates using ellipsometry and force-displacement spectroscopy. In Appendix B a brief description of work done to grow isolated nanowires of Cu:TCNQ, between two metal electrodes in planar geometry and in anodic alumina membranes is given.

No description available.

La presente tesis doctoral titulada ¿Materiales funcionales híbridos para el reconocimiento óptico de explosivos nitroaromáticos mediante interacciones supramoleculares¿ se basa en la combinación de principios de Química Supramolecular y de Ciencia de los Materiales para el diseño y desarrollo de nuevos materiales híbridos orgánico-inorgánicos funcionales capaces de detectar explosivos nitroaromáticos en disolución. En primer lugar se realizó una búsqueda bibliográfica exhaustiva de todos los sensores ópticos (cromogénicos y fluorogénicos) descritos en la bibliografía y que abarca el periodo desde 1947 hasta 2011. Los resultados de la búsqueda están reflejados en el capítulo 2 de esta tesis. El primer material híbrido preparado está basado en la aplicación de la aproximación de los canales iónicos y, para ello, emplea nanopartículas de sílice funcionalizadas con unidades reactivas y unidades coordinantes (ver capítulo 3). Este soporte inorgánico se funcionaliza con tioles (unidad reactiva) y una poliamina lineal (unidad coordinante) y se estudia el transporte de una escuaridina (colorante) a la superficie de la nanopartícula en presencia de diferentes explosivos. En ausencia de explosivos, la escuaridina (color azul y fluorescencia intensa) es capaz de reaccionar con los tioles anclados en la superficie decolorando la disolución. En presencia de explosivos nitroaromáticos se produce una inhibición de la reacción escuaridinatiol y la suspensión permanece azul. Esta inhibición es debida a la formación de complejos de transferencia de carga entre las poliaminas y los explosivos nitroaromáticos. En la segunda parte de esta tesis doctoral se han preparado materiales híbridos con cavidades biomiméticas basados en el empleo de MCM-41 como soporte inorgánico mesoporoso (ver capítulo 4). Para ello se ha procedido al anclaje de tres fluoróforos (pireno, dansilo y fluoresceína) en el interior de los poros del soporte inorgánico y, posteriormente, se ha hidrofobado el interior de material mediante la reacción de los silanoles superficiales con 1,1,1,3,3,3-hexametildisilazano. Mediante este procedimiento se consiguen cavidades hidrófobas que tienen en su interior los fluoróforos. Estos materiales son fluorescentes cuando se suspenden en acetonitrilo mientras que cuando se añaden explosivos nitroaromáticos a estas suspensiones se observa una desactivación de la emisión muy marcada. Esta desactivación de la emisión es debida a la inclusión de los explosivos nitroaromáticos en la cavidad biomimética y a la interacción de estas moléculas (mediante interacciones de ¿- stacking) con el fluoróforo. Una característica importante de estos materiales híbridos sensores es que pueden ser reutilizados después de la extracción del explosivo de las cavidades hidrofóbicas. En la última parte de esta tesis doctoral se han desarrollado materiales híbridos orgánicoinorgánicos funcionalizados con ¿puertas moleculares¿ que han sido empleados también para detectar explosivos nitroaromáticos (ver capítulo 5). Para la preparación de estos materiales también se ha empleado MCM-41 como soporte inorgánico. En primer lugar, los poros del soporte inorgánico se cargan con un colorante/fluoróforo seleccionado. En una segunda etapa, la superficie externa del material cargado se ha funcionalizado con ciertas moléculas con carácter electrón dador (pireno y ciertos derivados del tetratiafulvaleno). Estas moléculas ricas en electrones forman una monocapa muy densa (debida a las interacciones dipolo-dipolo entre estas especies) alrededor de los poros que inhibe la liberación del colorante. En presencia de explosivos nitroaromáticos se produce la ruptura de la monocapa, debido a interacciones de ¿-stacking con las moléculas ricas en electrones, con la consecuencia de una liberación del colorante atrapado en el interior de los poros observándose una respuesta cromo-fluorogénica / Salinas Soler, Y. (2013). Functional hybrid materials for the optical recognition of nitroaromatic explosives involving supramolecular interactions [Tesis doctoral]. Editorial Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/31663 / TESIS / Premios Extraordinarios de tesis doctorales