The object of this research was to develop a retort for research and development of thermal processes which use common commercial thermal processing techniques. An FMC 500W laboratory sterilizer, designed to operate with an FMC weir product racking system, was modified for conventional steam, positive flow steam/air and water immersion/air overpressure thermal processing of foods in thin profile retortable packages. The research included the modification of the retort plumbing and the fabrication of a set of product trays and a racking system. The completed system was tested for temperature distribution and stability, and heat transfer distribution for each processing mode. The latter was achieved by comparing the heat penetration parameters calculated from the centerpoint temperature histories of conduction heating teflon transducers. / Applied Science, Faculty of / Graduate

The effect of incorporation two clays; layered double hydroxides (LDH) and montmorillonite layered silicates (MLS) in linear low density polyethylene (PE) matrix was investigated. MLS and LDH were added of 5, 15, 30 and 60 weight percent in the PE and compounded using a Brabender. Ground pellets were subsequently compression molded. Dispersion of the clays was analyzed using optical microscopy, SEM and XRD. Both the layered clays were immiscible with the PE matrix and agglomerates formed with increased clay concentration. The thermal properties were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Both clays served as nucleation enhancers increasing recrystallization temperatures in the composites. Flame retarding properties were determined by using the flammability HVUL-94 system. LDH indicated better flame retarding properties than MLS for PE. The char structure was analyzed by environmental scanning electron microscopy. Mechanical properties were studied by tensile testing and Vickers microhardness testing apparatus.

Ceramic Matrix Composites (CMC) are attractive material systems for structural applications where resistance to intermediate (700 0C-950 0C) and high temperatures (900 0C-1400 0C) is required and low density is desired. There are currently barriers to a more widespread adoption of CMCs which include less robust simulation tools, which this dissertation seeks to address. A novel unified reduced order homogenization model for initial quasi-static, creep, and fatigue loading of SiC/SiC CMCs at intermediate and high temperatures is proposed. Driven by a single set of parameters, the model can seamlessly transition between initial quasi-static, creep, and fatigue regimes while capturing the complex material response of SiC/SiC CMCs. The reduced order homogenization approach provides a robust and efficient computational platform for analyzing composite behavior. Continuum damage mechanics provides the basis for the initial brittle CMC behavior while a hybrid damage-viscoplasticity model combined with an oxidation driven crack sealing effect drives the time-dependent brittle-ductile material behavior at high temperatures. A temporal multiscale approach extends the spatial multiscale model into fatigue regime at high temperatures, avoiding the computational complexity of modeling each cycle individually. At intermediate temperatures, a one-dimensional model based on the slow crack growth model originally proposed by Iyengar and Curtin is generalized to three dimensions focusing on a woven composite architecture. For this oxidation-assisted rupture model, the constitutive equation in the axial tow direction is governed by the continuum damage mechanics variant of the slow crack-growth model and the availability of oxygen to fibers, which in turn depends on the initial matrix pores and subsequent matrix cracking. The model is verified on two SiC/SiC material systems, S200H and GEA SMI, in both initial quasi-static and time-dependent loading regimes at both high and intermediate temperatures.

This thesis is focused on renewable energy sources, which are currently and increasingly used. Primarily for passive and low-energy houses. The principles that apply to heat pumps and solar collectors with thermal storage, which are suitable for new or older buildings, are described in detail. The thesis analyzes the thermal properties of the object under consideration and the proposed heat pump with its calculation and determination of the payback period of the investment in dependence on the analysis of energy price development in the las 10 years.

The aim of the master’s thesis is study of polymer composite system with the addition of graphite, production of test specimen and determination of their mechanical and thermal properties. The theoretical part deals with graphene, its structure, preparation and properties. Subsequently, it deals with functionalization and derivates and nanocomposites polymers with the addition of graphene are generally analyzed. The experimental deals with the preparation of selected specimens. Tensile and laternal tests and DMA were used for study.

<div> <p>Thermal processing is a critical step in shelf-stable food manufacturing to the ensure safety of the food products. To accurately model and establish the thermal processes, temperature-dependent thermal properties are needed. Existing methods for measuring the temperature-dependent thermal diffusivity (α), thermal conductivity (k) and volumetric heat capacity (C) are time consuming, tend to have high errors, and cannot provide results in a single experiment, especially at temperatures above 100°C. A novel bench scale device, named Thermal Properties Cell (TPCell), was custom made to rapidly estimate the temperature-dependent thermal parameters of food products. </p> <p> </p> <p>The TPCell used thin film heaters as the heating elements. The first study focused on estimating the thermal properties of a thin film heater. Using mathematical modeling and sequential parameter estimation, the effective thermal diffusivity of the thin film heater was found at different temperatures. The estimated thermal properties of the thin film heater were used for the second study.</p> <p> </p> <p>The objective of the second study was to design optimal complementary experiments using TPCell. Complementary experiments are a combination of experiments that enable estimation of multiple thermal parameters from the experimental temperature data, based on sensitivity analysis. Sensitivity coefficients indicate the extent of change in a measured variable due to a change in value of an input parameter. Designs of experiments were simulated and their impact on sensitivity and optimality criteria was analyzed. Results from the simulated profiles were validated using sweet potato puree. </p> <p> </p> <p>Learnings from this work can be directly applied for the optimization of all types of food thermal processes, including retort and aseptic processing. Optimally designed processes increase preservation of the heat labile nutrients, color, flavor, and taste compounds, thereby enhancing the quality of food products.</p> </div> <br>

An important criteria for optimising hydraulic systems is their size. Especially for tanks and heat exchangers oil parameters as heat capacity and thermal conductivity have a big influence on the size. Additionally, various oils differ in their parameters. Accordingly, the heat capacity and thermal conductivity need to be known. However, little research has been done. Data-sheets usually do not provide any thermal data. In this paper, the thermal conductivity is measured for varying types of hydraulic oils. The thermal conductivity is determined by a newly designed test-rig measuring the radial temperature difference in a tube at a quasi-static state using a constant heat flux. Thus, an overview over the thermal conductivity of different oils is achieved. Based on the results, a comparison between different types of fluid is made.

The temperature dependence of the refractive index and the density of aqueous binary mixtures of water and ethyl alcohol (C₂H₅OH) were measured by using a modified Michelson interferometer and a narrow glass capillary tube over the temperature range of 278≤T≤353 K for solutions of 100, 75,65, 50, 25, 10 and 0 volume percent ethyl alcohol. The temperature was cycled over both increasing and decreasing directions to explore hysteresis in the cycling. The data are discussed and compared with the Lorentz-Lorenz (LL) formula. A more accurate formula which fits the experimental data better than the LL relation was derived. An attempt was made to determine the nature of the solvent-solute interaction through any changes that were found in the refractive index for He-Ne laser light and IR diode signals and to analyze the refractive index and density results to test the accuracy of the available mixing rules in predicting the refractive index values and the density of binary systems. Conductivity measurements (d. c.) over the temperature range 278≤T≤353 K of aqueous solutions of NaCl at various concentrations were made and used to establish transport properties of ions in solution. The dynamical properties of the electrolytes were used to establish the nature of hydrogen bonding in aqueous binary mixture systems. Rate equations for ion formation and recombination were used to establish the temperature ranges in which hydrogen bonding dominated in forming polymeric species. From experimental data on the binary mixtures with water, a better understanding of water in its different functions and aggregation is possible. The water molecule itself and its response to the environment are understood when suitable studies are made of the forces in the system. In this work, some qualitative aspects of the interactions and dynamics of the water molecule have been investigated. Classical molecular dynamics simulations were tried to explain some of the thermodynamical properties of the water molecule.

Thesis: Sc. D., Massachusetts Institute of Technology, Department of Nuclear Engineering, 1977 / Includes bibliographical references. / Sc. D. / Sc. D. Massachusetts Institute of Technology, Department of Nuclear Engineering

La thérapie génique est probablement une des approches la plus ambitieuse de l'histoire de l'humanité pour éliminer des maladies résistantes à tout autre traitement. Cependant, c'est une approche qui doit encore être développée afin d'obtenir un meilleur contrôle du processus de délivrance des médicaments et aussi de réduire les coûts. À cette fin, ce projet de thèse est axé sur l’optimisation et le contrôle de la délivrance d’oligonucléotides basée sur l'utilisation de nanobâtonnets d'or (Gold NanoRods, GNRs). De telles nanoparticules (40 nm de long et 10 nm de diamètre) sont internalisées par les cellules et grâce à leurs propriétés physiques extraordinaires permettent de délivrer les médicaments dans le cytoplasme de manière contrôlée. En effet, leur absorption très élevée dans le proche infrarouge du spectre électromagnétique permet de convertir l’énergie lumineuse en chaleur à l’intérieur et autour des nanobâtonnets, sans affecter la cellule. L’avantage d’une absorption dans l’infrarouge est qu’à cette longueur d’onde la lumière pénètre profondément dans les tissus humains (3 cm). Le contrôle de la température autour des nanoparticules permet la libération d'oligonucléotides par simple dénaturation du duplex à un instant donné.L’obtention de nanoparticules pouvant être considérées comme un « cargo » implique de remplir les conditions suivantes : stabilité de la forme colloïdale en milieu complexe, conservation des propriétés physiques et chimiques une fois administrées et possibilité d’immobiliser et de libérer le médicament de manière contrôlée.La première étape de mon projet a consisté à établir un protocole de synthèse de nanobâtonnets d’or afin d’obtenir une solution colloïdale mono-disperse et dont la bande d’absorption de plasmon longitudinal soit dans le proche infrarouge. L'étape suivante était d’optimiser un protocole de fonctionnalisation de la surface des GNRs. Le défi ici est associé à l'agrégation des GNRs lorsque le surfactant (CTAB) nécessaire au maintien des GNRs en solution est remplacé par des biomolécules (oligonucléotides). Cependant, après une étude systématique et détaillée, la déstabilisation de la couche protectrice de surfactant sur la surface métallique et l’ajout d’oligonucléotides ayant une fonction thiol à une des deux extrémités dans un rapport approprié ont permis une bio-fonctionnalisation efficace des nanobâtonnets. En conséquence, les nanoparticules fonctionnalisées, après redispersion dans la solution, ont les propriétés physico-chimiques nécessaires. En outre, l’immobilisation des oligonucléotides sur la surface des nanoparticules est spécifique (via la liaison thiol-Au) et permet leur transfert dans des solutions tamponnées ou dans des milieux complexes sans affecter leur stabilité. Après hybridation entre le simple brin immobilisé sur la surface des nanobâtonnets et le brin complémentaire, j’ai démontré que les oligonucléotides étaient stables et que le nombre de doubles brins qui se forment par hybridation peut être contrôlé. L’analyse des propriétés des nanomatériaux a constitué la seconde étape clé de mon travail, car elle revêt une importance cruciale pour la délivrance contrôlée de médicaments. J'ai décidé d'appliquer des méthodes uniquement optiques couvrant l'absorption des nanobâtonnets et l'analyse de la fluorescence des oligonucléotides marqués et des images TEM.Au cours du projet, il a donc été possible d’établir une nouvelle approche de fonctionnalisation et de créer un protocole de caractérisation efficace, axé sur les oligonucléotides. / Gene therapy is probably one of the most ambitious approaches in human history that aims to eliminate diseases, often those completely resistant to other treatments. However, this approach requires further development in order to obtain better control over the process of drug delivery and reduce costs. For this purpose, this project has focused on delivery of oligonucleotides using gold nanorods (GNRs). Such nanoparticles, (40 mm in length and 10 nm in diameter) can be internalized by cells and their extraordinary physical properties allow the delivery of drugs to the cytoplasm of cells in a controlled manner. Indeed, their strong absorption in the near-infrared part of the electromagnetic spectrum allows conversion of the energy of light into heat around the nanorods without affecting the cells. The advantage of absorption in the infrared is that at this wavelength the light can penetrate human tissues (3 cm). Control of the temperature around the nanoparticles allows the release of oligonucleotides by simple denaturation of the duplex at a given time.Obtaining nanoparticles that can be considered as a "cargo ship" implies fulfilling the following conditions: stability of the colloidal form in a complex medium, preservation of the physical and chemical properties once administered and the ability to immobilize and release the drug in a controlled manner.The first step of my project was to establish a nanorods synthesis protocol in order to obtain a monodisperse colloidal solution whose longitudinal absorption band is in the near infrared. The next step was to optimize the functionalisation protocol of the surface of the GNRs. The challenge here is associated with the aggregation of GNRs when the surfactant (CTAB) needed to maintain the GNRs in solution is replaced by biomolecules (oligonucleotides). However, after a systematic and detailed study, the destabilisation of the surfactant protective layer on the metal surface and the addition of oligonucleotides having a thiol function at one of the two extremities in a suitable ratio allowed an efficient bio-functionalisation of the nanoparticles. As a consequence, the functionalised nanoparticles, after redispersion in solution, possess the necessary physicochemical properties. In addition, the immobilisation of oligonucleotides on the surface of the nanoparticles is specific (via the thiol-Au bond) and allows their transfer into buffered solutions or in complex media without affecting their stability. After hybridisation between the single strand immobilized on the surface of the nanorods and the complementary strand, I demonstrated that the oligonucleotides were stable and that the number of double strands that are formed by hybridization can be controlled. The analysis of the properties of nanomaterials was the next important part of the work, as it is of crucial importance for the controlled delivery of drugs. I decided to apply only optical methods covering nanorods absorption and fluorescence analysis of labeled oligonucleotides and TEM images.In summary, during the project it was possible to establish a new functionalization approach and create a protocol for efficient characterization, focused on oligonucleotides. We expect that these observations will aid further research in the field of gene delivery based on gold nanoparticles.