Les générateurs thermoélectriques (TEG), associant des modules thermoélectriques à des échangeurs de chaleur adaptés, permettent de produire de l’électricité à partir d’une source chaude et d’une source froide. Leur utilisation, réservée actuellement à des applications de niche, va s’avérer judicieuse pour différentes applications industrielles ou domestiques en raison de la disponibilité imminente de nouveaux matériaux thermoélectriques permettant des rendements améliorés et des coûts moindres. Pour rendre plus attractive l’utilisation des TEG et améliorer le rendement global des futures installations, une conception et une utilisation optimisées sont indispensables.La conception de TEG performants nécessite le développement de modèles numériques intégrant tous les éléments de la chaîne énergétique (source chaude, source froide, échangeurs, convertisseurs électriques). L’objectif de la thèse est de créer un outil de simulation du fonctionnement des générateurs sur l’ensemble du cycle de production de chaleur et donc sur des fonctionnements réels dépendant du temps. Le modèle développé en 3D pour les transferts de chaleur prend en compte la dépendance à la température des propriétés des matériaux et l’effet Thomson pour le modèle thermoélectrique.La validation de cet outil de simulation a nécessité la comparaison des prédictions du modèle à des résultats expérimentaux. Un dispositif expérimental a été complété et amélioré afin de mieux répondre aux attentes des études en régime instationnaire. Ce banc d'essai permet d'effectuer des tests avec différentes configurations de générateur thermoélectrique et différentes conditions de fonctionnement. Le modèle a montré une estimation correcte des températures du système et de la production électrique du TEG. Le modèle numérique est validé et peut être utilisé pour la prédiction du fonctionnement d’un TEG dans diverses conditions. / Thermoelectric generators (TEG), combine thermoelectric modules with heat exchangers, making it possible to produce electricity from a hot source and a cold source. Their use, which is currently reserved for niche applications, will prove useful for various industrial or domestic applications due to the imminent availability of new thermoelectric materials allowing improved yields and lower costs. To make the use of TEGs more attractive and to improve the overall efficiency of future installations, optimized design and use are essential.The high-performance TEG design requires the development of numerical models integrating all the elements of the energy chain (hot source, cold source, exchangers, electric converters).The aim of the thesis is to create a tool for simulating the operation of generators over the entire heat production cycle and thus on real time-dependent operations. The model developed in 3D for heat transfer takes into account the temperature dependence of the properties of the materials and the Thomson effect for the thermoelectric model.The validation of this simulation tool required the comparison of model predictions with experimental results. An experimental device has been completed and improved to match better the expectations of unsteady studies. This test bench allows testing with different thermoelectric generator configurations and different operating conditions.The model showed a correct estimation of system temperatures and electrical output of TEG. The numerical model is validated and can be used to predict the operation of a TEG under various conditions.

Os materiais cerâmicos termoelétricos preparados a partir de ligas de SiGe, são utilizados em Geradores de Potência a Radioisótopos (GTR), na conversão de energia por efeitos termoelétricos. Neste trabalho de pesquisa foram estudadas as condições de preparação destas cerâmicas a partir de ligas de Silício-Germânio. Visou-se, portanto obter a melhor eficiência, pela otimização da \"Fator de Mérito\" (ou Número de loffe) , através dos processos de preparação e tratamentos térmicos da liga, e também na dopagem das cerâmicas. As ligas de silício-germânio (Si80Ge20) foram obtidas pela técnica de crescimento Czochralski, com campo elétrico aplicado (ECZ) e também por outras técnicas de fusão e solidificação, para comparação. Amostras com homogeneidade satisfatória foram quebradas e moídas para processamento cerâmico. E em seguida o pó da liga foi então dopado, misturando-se este com pó de boro amorfo e depois prensado, a fim de se obter elementos cerâmicos semicondutores tipo-p, com propriedades termoelétricas para altas temperaturas (&#8776 1000&#176C). A sinterização foi feita por três técnicas diferentes: pela técnica dos Pós Discretos ou PIES (Pulverized and Intermixed Elements of Sintering), pelo procedimento cerâmico convencional, e pela Prensagem a Quente (HotPressing), sendo esta última usada como padrão de comparação. As amostras obtidas foram analisadas e caracterizadas por técnicas convencionais de caracterização cerâmica tais como: medidas da densidade, dos tamanhos dos grãos, porosidade, área superficial, etc. e também por medidas de alguns dos parâmetros físicos que influenciam diretamente na eficiência termoelétrica tais como: coeficiente Seebeck, calor específico e parâmetro de rede, para ligas de composição nominal Si80Ge20 sem e com dopantes para semicondutores tipo-p. Uma amostra preparada pela General Electric usando a técnica de Prensagem a Quente (Hot-Pressing), foi usada como padrão de comparação. A liga obtida pela técnica ECZ apresentou boa homogeneidade. Foi encontrado que a qualidade microestrutural das cerâmicas tais como: densidade, a regularidade e a composição química dos grãos das cerâmicas depende muito da técnica de processamento. Estes elementos cerâmicos termoelétricos poderão ser usados como fonte de energia em Geradores de Potência Termoelétrica a Radioisótopos (GTR) mais especificamente na alimentação de satélites brasileiros fabricados pelo Centro Técnico Aeroespacial (CTA) junto com o Instituto de Estudos Avançados (IEAv) através da Divisão de Energia Nuclear (IEAvENU) deste Instituto, ou entre outras aplicações para fins militares e civil / Doped ceramics elements, prepared from Si-Ge alloy are used in Radioisotopic Thermoelectric Generators (GTR) for energy conversion by thermoelectrical effects. In this research the experimentais conditions to prepare thermoeletric ceramics from Silicon-Germanium alloys have been determined. The purpose was to get the best efficiency, by optimization of the \"Merit Figure\" (or \"loffe Number\'), using different preparation methods and thermal treatments of alloys, as well as the doping of these ceramics. Silicon-Gemanium alloys (Si80Ge20) have been grown by the Czochralski technique under applied eletric field (ECZ) , as well as by others fusion techniques for comparison. Afier the fusion of the alloy, samples with satisfactory homogeneity have been smashed and milled for ceramic processing. Powder of Si-Ge alloy was then heavely doped by mixing with amorphous boron powder and pressed to get type-P semiconductor thermoelectrical ceramics elements, at high temperatures (&#8776 1000 &#176C). The sintering was made by three differents techniques: PIES method (Pulverized and Intermixed Elements of Sintering), convencional ceramic processing, and Hot-Pressing sintering, for comparison. The samples have been analyzed and characterized by conventional ceramics technique such as: determination of density, grain size, porosity, surface area, etc. and measuring toa some physical parameters that affect directly the thermoelectrical efficiency such as: Seebeck coefficient, specific heat and lattice parameter to Silicon-Germanium alloys with nominal composition Si80Ge20 with or without dopings to type-P semiconductors. A sample prepared by General Electric Company using the Hot-Pressing technique was used as standard. The alloy grown by ECZ technique showed a good homogeneity. It was found that the microstructural quality of the ceramics such as: density, grains regularity and chemical composition of the ceramics depend of the ceramic processing technique. These thermoelectrical elements can be used as power supply for the Brazilian satellites made by the Centro Técnico Aeroespacial (CTA) together with the Instituto de Estudos Avançados (IEAv) through the Divisão de Engenharia Nuclear (ENU) , and among other applications for military and civil purposes

Small domestic hot water boilers burning solid fuels represent a significant source of air pollu-tion. It is therefore an effort to increase their combustion efficiency and to reduce the produc-tion of harmful emissions. For this reason, the operation of older and currently unsatisfactory types of household boilers has been legally restricted. Preferred types of boilers are low-emission boilers, especially automatic or gasification boilers. Most of them, however, in compar-ison with previous types of boilers, also require connection to the electricity grid. If there is a long-term failure in electricity grid, the operation of newer boiler types is limited. Wood and coal gasification boilers are currently available on the market and can be operated even in the event of a power failure, but only in heating systems with natural water circulation. In heating systems with forced water circulation, these boilers, fireplaces or fireplace inserts with hot-water heat exchangers cannot be operated without external battery supply in the event of a power failure. The dissertation thesis therefore deals with the question of whether it would be possible by thermoelectric conversion of waste heat of flue gases of small-scale low-emission combustion hot water domestic boilers to obtain sufficient electricity, to power supply their circulation pumps and to ensure operation in systems with forced water circulation independently of elec-tricity supply from the grid. In order to answer this question, a simulation tool predicting the power parameters of ther-moelectric generators was created. Compared to previously published works, the calculations and simulations include the influence of the generator on the boiler flue gas functionality. To verify the simulation tool, an experimental thermoelectric generator was built using the waste heat of the flue gas of an automatic hot water boiler for wood pellets. In addition to this genera-tor, there was also created an experimental thermoelectric fireplace insert and other equipment related to these experiments.

The thesis deals with the problem of potential use of solar energy through the conversion into electric energy. The thesis analyses in great detail several types of conversion. My special concern included photovoltaic conversion and thermal conversion of solar energy using steam turbines for energy production. In the subsequent parts, I focus on the problem of photovoltaic, photovoltaic systems, and solar thermal power plants, their installation and use.

This diploma thesis deals with a design layout of the fan power supply that ensures the increase of the efficiency of the heating unit. For usage in the areas without electric power, the power supply is secured by thermoelectric generator. The system has to function on the basis of autonomous system which turns itself on only when necessary. In the introductory part of the paper there is a recherché of thermoelectric generators for general usage. Next it mentions the basic findings in from the field of DC/DC converters for low power applications. In this part attention is given to MPPT algorithm. Furthermore basic knowledge from the field of heat transmission together with its most used elements is described. Subsequently existing applications that increase the effectiveness of heating are mentioned. Their disadvantage however is that they depend on the external source of power supply. The practical part to a large extent covers the analysis of the suitability of the chosen thermoelectric module. For securing of the heat gradient of the generator there was a model created meeting the figures in the manual and there are several simulations in the MATLAB program. Furthermore several measurements of the thermoelectric module took place in order to secure realistic figures. Subsequently a DC/DC converter was chosen. Finally the testing was made on the real composition. In conclusion there is an overall evaluation including the real usage and the economical aspect of the project. The outcomes of the work enable to avoid common mistakes that are part of many specialized articles. The created system is to be used after the adjustment of the cooling to the required aim. At the same time it becomes very effective.

Tato diplomová práce se zabývá vývojem autonomního zdroje elektrické energie založeného na MEMS termoelektrickém generátoru. Uvažovaný generátor bude následně použit pro napájení autonomní senzorické jednotky pro letecké aplikace. Systémový pohled na autonomní senzorickou jednotku zahrnuje senzor se zpracováním a přenosem dat, energy harvester (termoelektrický generátor), power management, akumulační prvek a autodiagnostiku. Všechny výše uvedené komponenty jsou v práci podrobně popsány. V úvodu práce je provedena široká rešerše existujících termoelektrických generátorů pro letecké aplikace. Následně jsou popsány základní teoretické poznatky z oblasti DC/DC měničů pro energy harvesting. Zvláštní pozornost je věnována metodám MPPT (Maximum Power Point Tracking). Jako základ pro vývoj napájení autonomní senzorické jednotky bylo provedeno množství simulací za pomoci nástroje MATLAB/Simulink Simscape. Pro identifikaci prametrů modelu posloužilo měření na speciálním přípravku. Praktická implementace teoreticky popsaných problémů je provedena na k tomuto účelu navrženém technologickém demonstrátoru. Závěrem je zhodnocena reálná využitelnost navržené technologie pro finální aplikaci v leteckém průmyslu.

Předložená disertační práce řeší komplexní mechatronický návrh autonomního termoelektrického zdroje energie pro letecké aplikace. Na základě dostupných zdrojů a literatury práce popisuje současný stav problematiky. V práci jsou prezentovány simulační modely MEMS termoelektrických článků, které jsou ověřeny experimentálním testováním a hodnotami dostupnými od výrobce. Na základě metodiky model-besed design byly navrženy a vyrobeny tři demonstrátory. Jejich vlastnosti byly testovány v reálných podmínkách na letecké pohonné jednotce.

Aufgrund von steigenden Energiekosten und einer sukzessive steigenden öffentlichen sowie politischen Forderung nach Umweltbewusstsein und Nachhaltigkeit, ist die Effizienzsteigerung von Gesamtsystemen einer der treibenden Kräfte für innovative, technologische Neuheiten geworden. Besonders bei der Entwicklung von verbrennungsmotorisch angetriebenen Fahrzeugen wurden z.B. durch die Hybridisierung von Antriebssträngen, die die Rekuperation von kinetischer Energie ermöglichen, Technologien zur Energieeinsparung etabliert. Da bei Verbrennungsmotoren ein hoher Anteil der im Kraftstoff gespeicherten Energie technologiebedingt als Abwärme im Abgas verloren geht, bietet die Wärmerekuperation ein weiteres hohes Potential für weitere Einsparungen. Diese ist z.B. mit Hilfe von thermoelektrischen Generatoren (TEG) möglich, die einen Wärmestrom direkt in elektrische Energie umwandeln. Zur effizienten TEG-Systemgestaltung ist ein hoher Temperaturgradient über dem thermoelektrisch aktivem Material notwendig, der wiederum zu kritischen thermomechanischen Spannungen im Bauteil führen kann. Diese werden zum einen durch die unterschiedlichen Temperaturausdehnungskoeffizienten der verschiedenen Materialien und zum anderen durch die mechanische Anbindung auf der heißen und kalten Seite des TEG verursacht. Somit liegt ein Zielkonflikt zwischen dem thermoelektrischen Systemwirkungsgrad und der mechanischen Festigkeit des Bauteils vor. In dieser Arbeit wird mit Hilfe einer mehrkriteriellen Parameteroptimierung eines vollparametrisierten FE-Modells des TEG in ANSYS WORKBENCH eine Methode vorgestellt, den thermoelektrischen Wirkungsgrad bei gleichzeitiger Reduktion der thermomechanischen Spannungen zu optimieren. Zur Optimierung kommt dabei ein genetischer Algorithmus der MATLAB GLOBAL OPTIMIZATION TOOLBOX zum Einsatz. Der Modellaufbau wird in ANSYS WORKBENCH mit der Makro-Programmiersprache JSCRIPT realisiert. Als Ziel- und Bewertungsfunktionen wird die mechanische Belastung jedes Bauteils im TEG ausgewertet und dessen elektrische Leistungsdichte berechnet. Die Ergebnisse zeigen, dass mit Hilfe der vorgestellten Methodik eine paretooptimale Lösung gefunden werden kann, die den gestellten Anforderungen entspricht.

The search for renewable energy resources and ways to harvest them has become a global mainstream topic among researchers nowadays, with solar cells and thermoelectric generators among the energy harvesting technologies currently being researched in vast. CZTS (Cu2ZnSnS4), a p-type semiconducting material initially researched to replace copper indium gallium selenide (CIGS) as the light absorbing layer in thin film solar cells, was studied in this doctoral work for alternative uses in energy harvesting. This work aims to systemically investigate the prospects of CZTS to be used as hole transport layers and thermoelectric generators. CZTS thin film was successfully fabricated using a versatile approach involving hot-injection synthesis of CZTS nanoparticles ink followed by spin coating and thermal treatment. Results obtained revealed the possibility to fine control CZTS thin film fabrication based on ink concentration and spin. Besides that, thermal treatment temperature was found to affect the film’s overall properties, where an increase in thermal treatment temperature improved the degree of crystallinity and electrical properties. In addition, a phase change going from less stable cubic and wurtzite structures to a more stable tetragonal structure was also observed. Furthermore, CZTS was found to be a good candidate to replace the commonly used organic hole transport layer in perovskite solar cells, with potentials in improving performance and stability. In addition, CZTS also possessed good transport properties to be a potential p-type material in a thermoelectric generator, with the preliminary performance of fabricated CZTS/AZO thermoelectric generator showing a maximum power output of ~350 nW at ~170 KΔT. These findings provide new perspectives for CZTS in energy harvesting applications, despite the struggle in its development as the absorber layer in thin film solar cells. Besides providing a deeper understanding of CZTS and its vast possibilities in energy harvesting applications, promising future research stemming from this work is also limitless, reinventing ways in material studies, in search of alternative applications which may be of benefit.

According to the U.S. energy consumption survey in 2012, about 25% of the commercial and 42% of the residential building energy were used for heating. Despite the development of new and more efficient Heating, Ventilation, and Air Conditioning (HVAC) systems over the years, the high energy consumption in heating is still one of the major energy efficiency issues. Studies showed that decreasing HVAC operating temperature set points by 4°F will result in energy savings of 15% or more. Thus, the smart localized heating control (SLHC) system was designed and prototyped to provide localized heat directly to a person so that HVAC can run at a lower temperature set point. SLHC detects human movement and delivers the heat based on the result of the target location estimation and temperature measurement feedback. To detect the human movement, image processing techniques were used; image segmentation, mass center detection, background subtraction using the Mixture of Gaussian model, and human feature detection. In SLHC, a near-infrared heater and a tracking function were used to provide an instant and a direct heat to the person in order to minimize wasting energy. The SLHC system is divided into the sensing and processing (SP) and the heating and regulating (HR) subsystem. The SP’s primary function is to process captured video images and measured temperature data. SP also generates and sends the heater operating signal to HR. HR purposes to control the heater’s direction and power based on the signal. The communication between SP and HR was established through Wi-Fi enabled development platform. The SLHC prototype successfully processed the sensing data and transmitted the control signal. The result shows that it detected human movement and estimated the person’s location in 3D space within 10% margin of error. Also, it delivered the focused heat to the surface of the human body and increased the temperature by 10.0°F in 3 minutes at the distance of 1.5m away from the heater. This cost-effective, wireless, and localized heating system demonstrates the potential to improve energy efficiency in buildings. / Electrical and Computer Engineering