In this work, slurries of powder catalysts are washcoated on 22 mm diameter and 13 mm height cordierite monoliths. CeO2-ZrO2 (CZO) and CeO2-ZrO2- Al2O3 (CZAO) mixed oxides are synthesized by co-precipitation and sol-gel methods respectively, to be used as support materials of Pd and Rh metals. Metal loaded CZO is mixed with gamma phase alumina. Powder catalysts and their slurries are characterized by XRD, BET, ICP-MS and the monolithic catalysts are imaged by SEM. Catalytic activities of monolithic catalysts are tested in dynamic test system which is computerized and basically composed of gas flow control and conditioning units, split furnace, quartz reactor, mass spectrometer and CO analyzer. Gas mixture containing CO, C3H6, C3H8, NO, H2, O2, CO2, SO2, H2O and N2 is used to simulate the exhaust gas of gasoline vehicles. O2 is oscillated at 1 Hz frequency around the stoichiometric condition. Monolithic catalyst in the reactor is heated and cooled between 150 &ordm / C and 600 &ordm / C. Gas composition data from massspectrometer and CO analyzer and temperature data from thermocouple at the monolith entrance, are converted to conversion versus temperature graphs. Results of 26 activity tests are compared. Catalyst containing coimpregnated CZO support material with metals, showed the lowest loss of catalytic performance after exposure to SO2 during activity tests. Catalyst containing separately impregnated CZO support material, showed the highest resistance against thermal aging at 900 &ordm / C and 1000 &ordm / C, and even improved catalytic activity after aging. These catalysts showed higher resistances against the applied procedures than the commercial catalyst.

Currently, most of the RNAs used in lab research are prepared by in vitro transcription or chemical synthesis, which can be costly. In vivo expression in bacterial cells is another approach to RNA preparation that allows large scale production at a lower cost. However, there are some obstacles in bacterial expression, including RNA degradation in host cell, as well as RNA extraction and purification. tRNA and 5S RNA have been reported as scaffolds to circumvent the degradation problem. These scaffolds can not only make the RNA product survive in the cell but also increase the stability after extraction. The packaging RNA (pRNA) of bacteriophage phi29 is a small non-coding RNA with a compact structure. The three-way junction (3WJ) region from pRNA is a thermodynamically stable RNA motif good for constructing therapeutic RNA nanoparticles. The 3WJ can not only integrate multiple RNA modules, but also stabilize them. Here I report a series of approaches made to express recombinant RNAs based on pRNA or 3WJ in bacteria, including 1) Investigating the mechanism of RNA folding in vitro and in vivo using 3WJ. 3WJ-based RNAs were expressed in E. coli using pET system. The results show that the folding of RNA is affected by both overall and regional energy landscape. 2) Expression of an RNA nanoparticle harboring multiple functional modules, a model of therapeutic RNA, in E. coli using a combination of tRNA scaffold and pRNA-3WJ. The expression was successful and all of the RNA modules were functional. 3) Expression of pRNA-based recombinant RNAs in B. subtilis. This is a novel system of expressing recombinant RNAs in Gram-positive bacteria.

The need for aggregating privacy policies is present in a variety of application areas today. In traditional client/server models, websites host services along with their policies in different private domains. However, in a cloud-computing platform where aggregators can merge multiple services, users often face complex decisions in terms of choosing the right services from service providers. In this computing paradigm, the ability to aggregate policies as well as services will be useful and more effective for users that are privacy conscious regarding their sensitive or personal information. This thesis studies the problems associated with the Platform for Privacy Preference (P3P) language, and the present issues with communicating and understanding the P3P language. Furthermore, it discusses some efficient strategies and algorithms for the matching and the merging processes, and then elaborates on some privacy policy conflicts that may occur after merging policies. Lastly, the thesis presents a tool for matching and merging P3P policies. If successful, the merge produces an aggregate policy that is consistent with the policies of all participating service providers.

Abstract The aim of this thesis project was to gain new knowledge on the effect of phosphorus on the catalytic activity and characteristics of automotive exhaust gas catalyst components. The simultaneous roles of phosphorus and calcium were also studied. The first test series of powdery catalyst samples contained Rh and oxide (Test series 1) and the second, Pt and oxide or ZSM-5 (Test series 2). The catalysts were analyzed when fresh and after two ageing and phosphorus poisoning procedures developed in this work. The procedures consisted of adding poison via impregnation in an aqueous solution (for Test series 1) and in the gaseous phase under hydrothermal conditions (for Test series 2). The poison compounds formed and the changes in the washcoat were studied by using physisorption analyses, SEM, TEM, XRD, and FTIR-ATR. The poison content of the samples was determined by ICP-OES and XRF. Laboratory-scale activity measurements were done to investigate the catalytic activity. Thermodynamic calculations were used to obtain information about ageing conditions and phosphorus compounds formed during ageing. Phosphorus decreased the catalytic activity and the characteristic surface areas of the catalysts. Addition of calcium to a phosphorus-poisoned catalyst was found to have even a regenerating effect on the catalysts' activity. The poisoning methods developed in this study resulted in the same phosphorus compounds as can be found in vehicle-aged catalysts. Phosphorus was identified as cerium, zirconium, aluminium, and titanium phosphates. Phosphorus was detected in zeolites, but phosphorus-containing compounds were not observed. Phosphorus poisoning takes place in the gas phase at high operating temperatures and with high oxygen and water contents. It was also shown that the role of phosphorus poisoning was more pronounced than the role of hydrothermal ageing alone. Phosphorus poisoning mainly affects the oxide components used in this study, not the noble metals. The results can be utilized in the development of catalytic materials and catalyst compositions that can better tolerate phosphorus poisoning under hydrothermal conditions. The results can also be applied in evaluating the effects of phosphorus on different catalyst compositions and in estimating the age of commercial catalysts.

The need for aggregating privacy policies is present in a variety of application areas today. In traditional client/server models, websites host services along with their policies in different private domains. However, in a cloud-computing platform where aggregators can merge multiple services, users often face complex decisions in terms of choosing the right services from service providers. In this computing paradigm, the ability to aggregate policies as well as services will be useful and more effective for users that are privacy conscious regarding their sensitive or personal information. This thesis studies the problems associated with the Platform for Privacy Preference (P3P) language, and the present issues with communicating and understanding the P3P language. Furthermore, it discusses some efficient strategies and algorithms for the matching and the merging processes, and then elaborates on some privacy policy conflicts that may occur after merging policies. Lastly, the thesis presents a tool for matching and merging P3P policies. If successful, the merge produces an aggregate policy that is consistent with the policies of all participating service providers.

Reliability measures have been well studied over many years, beginning with an entire chapter devoted to intraclass correlation in the first edition of Fisher (1925). Such measures have been thoroughly studied for two factor models. This dissertation, motivated by a medical research problem, extends point and confidence interval estimation of both intraclass correlation coefficient and interater reliability coefficient to models containing three crossed random factors -- subjects, raters and occasions. The intraclass correlation coefficient is used when decision is made on an absolute basis with rater's scores, while the interater reliability coefficient is defined for decisions made on a relative basis. The estimation is conducted using both ANOVA and MCMC methods. The results from the two methods are compared. The MCMC method is preferred for analyses of small data sets when ICC values are high. Besides, the bias of estimator of intraclass correlation coefficient in one-way random effects model is evaluated. / Statistics

To improve the performance of the three-way catalytic (TWC) converter, advanced control strategies and onboard diagnostics (OBD) systems are needed. Both rely on a relatively accurate but computationally efficient TWC converter model. This thesis aims to develop a control-oriented model that can be employed to develop the control strategies and OBD systems of the TWC converter. The thesis consists of two parts, i.e., the high-fidelity model development and the model reduction. Firstly, a high-fidelity model is built using the energy and mass conservation principles. In this model, a constant inlet simulation is used to validate the warming-up characteristics, and a driving cycle simulation is used to calibrate the reaction rate parameters. The results of the simulation show that the high-fidelity model has adequate accuracy. Secondly, a reduced-order model is developed based on phase and reaction simplifications of the high-fidelity model. The aim of the development of the reduced-order model is to propose a computationally efficient model for further development of control strategies and state estimators for OBD systems. The accuracy of the reduced-order model is then validated by means of simulations. / Thesis / Master of Science (MSc)

Maize is susceptible to biotic and abiotic stresses. The most important abiotic stresses in Africa are drought and low soil fertility. Aflatoxin contamination is a potential problem in areas facing drought and low soil fertility. Three studies were conducted to evaluate maize germplasm for tolerance to stress. In the first study, fifteen maize inbred lines crossed in a diallel were evaluated under drought, low N stress, and well-watered conditions at six locations in three countries to estimate general (GCA) and specific combining ability (SCA), investigate genotype x environment interaction, and estimate genetic diversity and its relationship with grain yield and heterosis. GCA effects were not significant for grain yield across environments. Lines with good GCA effect for grain yield were P501 and CML258 across stresses. Lines CML339, CML341, and SPLC7-F had good GCA effects for anthesis silking interval across stresses. Additive genetic effects were more important for grain yield under drought and well-watered conditions. Heterosis estimates were highest in stress environments. Clustering based on genetic distance calculated using marker data from AFLP, RFLP, and SSRs grouped lines according to origin. Genetic distance was positively correlated with grain yield and specific combining ability. In the second study, synthetic hybrids were evaluated at seven locations in three countries to estimate GCA and SCA effects under low N stress and optimal conditions and investigate genotype x environment interaction. GCA effects were significant for all traits across low N stress and optimal conditions. The highest yielding synthetic hybrids involved synthetics developed from stress tolerant lines. Synthetics 99SADVIA-# and SYNA00F2 had good GCA for grain yield across low N stress conditions. Heterosis was highly correlated with grain yield. Optimal environments explained more variation than stress environments. The third study evaluated the agronomic performance and aflatoxin accumulation of single and three-way cross white maize hybrids at five locations in Texas. Inbreds CML343, Tx601W, and Tx110 showed positive GCA effects for grain yield. Significant GCA effects for reduced aflatoxin concentration were observed in lines CML269, CML270, and CML78 across locations. Differences in performance between single and three-way crosses hybrids were dependent mostly on the inbred lines.

Maize is susceptible to biotic and abiotic stresses. The most important abiotic stresses in Africa are drought and low soil fertility. Aflatoxin contamination is a potential problem in areas facing drought and low soil fertility. Three studies were conducted to evaluate maize germplasm for tolerance to stress. In the first study, fifteen maize inbred lines crossed in a diallel were evaluated under drought, low N stress, and well-watered conditions at six locations in three countries to estimate general (GCA) and specific combining ability (SCA), investigate genotype x environment interaction, and estimate genetic diversity and its relationship with grain yield and heterosis. GCA effects were not significant for grain yield across environments. Lines with good GCA effect for grain yield were P501 and CML258 across stresses. Lines CML339, CML341, and SPLC7-F had good GCA effects for anthesis silking interval across stresses. Additive genetic effects were more important for grain yield under drought and well-watered conditions. Heterosis estimates were highest in stress environments. Clustering based on genetic distance calculated using marker data from AFLP, RFLP, and SSRs grouped lines according to origin. Genetic distance was positively correlated with grain yield and specific combining ability. In the second study, synthetic hybrids were evaluated at seven locations in three countries to estimate GCA and SCA effects under low N stress and optimal conditions and investigate genotype x environment interaction. GCA effects were significant for all traits across low N stress and optimal conditions. The highest yielding synthetic hybrids involved synthetics developed from stress tolerant lines. Synthetics 99SADVIA-# and SYNA00F2 had good GCA for grain yield across low N stress conditions. Heterosis was highly correlated with grain yield. Optimal environments explained more variation than stress environments. The third study evaluated the agronomic performance and aflatoxin accumulation of single and three-way cross white maize hybrids at five locations in Texas. Inbreds CML343, Tx601W, and Tx110 showed positive GCA effects for grain yield. Significant GCA effects for reduced aflatoxin concentration were observed in lines CML269, CML270, and CML78 across locations. Differences in performance between single and three-way crosses hybrids were dependent mostly on the inbred lines.

This study aims to explore the perceived benefits of three-way observation on the focal areas of objectives of the activities, error-correction techniques, and group-work in an upper-intermediate class in Bilkent University School of English Language. The data was collected through five classroom observations, six post-observation reflection sheets, five focus-group interviews with the students, and five post-observation interviews with the observer. A total of 15 upper-intermediate level students, one teacher, and one observer v were involved in the study. The data was analyzed qualitatively and with the use of descriptive statistics. The findings reveal that the perceptions of the students, teacher, and observer on the focal areas show variability in terms of quantity and quality. It was also discovered that student feedback reveals more detailed information about each focal area and that each perception has its own value and should be taken into consideration by the teacher, observer and students. In this study, the researcher formed a two-step three-way observation model. According to this model, the teacher transfers the information gathered from student interviews to the observer. Based on this information, the observer presents suggestions to the teacher by creating solutions to an existing problem, developing ideas related to classroom activities or increasing the effectiveness of teaching and learning processes in a class.