The temperature and field dependence of the magnetization of epitaxial, undoped anatase TiO2 thin films on SrTiO3 substrates was investigated. Low-energy ion irradiation was used to modify the surface of the films within a few nanometers, yet with high enough energy to produce oxygen and titanium vacancies. The as-prepared thin film shows ferromagnetism which increases after irradiation with low-energy ions. An optimal and clear magnetic anisotropy was observed after the first irradiation, opposite to the expected form anisotropy. Taking into account the experimental parameters, titanium vacancies as di-Frenkel pairs appear to be responsible for the enhanced ferromagnetism and the strong anisotropy observed in our films. The magnetic impurities concentrations was measured by particle-induced X-ray emission with ppm resolution. They are ruled out as a source of the observed ferromagnetism before and after irradiation.

We use different methods to deposit Ti thin film on the ITO glass substrate. Under the circumstances of using fixed concentration of electrolyte, changing anodic time, and applying voltage, we are able to use anodic method to make ordered nano TiO2 thin film,of which the smallest pore size is 18nm and the thickness is 4500

The temperature and field dependence of the magnetization of epitaxial, undoped anatase TiO2 thin films on SrTiO3 substrates was investigated. Low-energy ion irradiation was used to modify the surface of the films within a few nanometers, yet with high enough energy to produce oxygen and titanium vacancies. The as-prepared thin film shows ferromagnetism which increases after irradiation with low-energy ions. An optimal and clear magnetic anisotropy was observed after the first irradiation, opposite to the expected form anisotropy. Taking into account the experimental parameters, titanium vacancies as di-Frenkel pairs appear to be responsible for the enhanced ferromagnetism and the strong anisotropy observed in our films. The magnetic impurities concentrations was measured by particle-induced X-ray emission with ppm resolution. They are ruled out as a source of the observed ferromagnetism before and after irradiation.

Les COV présents en air intérieur sont une source d’inconfort pour les occupants et peuvent être nocifs pour la santé. La photocatalyse apparaît comme un procédé prometteur pour l’abattement de ces polluants. ArcelorMittal Liège Research développe à cet effet des films minces de TiOB2B déposé sur acier qui peuvent être intégrés dans des systèmes de purification d’air. Les objectifs de cette recherche sont, d’une part, identifier les paramètres influençant la dégradation photocatalytique de ces COV avec ce type de catalyseur et d’autre part, valider la possibilité de prédire les performances d’un réacteur photocatalytique par un modèle couplant l’écoulement et la réaction photocatalytique. Pour réaliser l’étude cinétique à des teneurs de quelques ppm, un dispositif expérimental adapté a été conçu ; il utilise un réacteur annulaire continu. L’acétaldéhyde a été choisi comme polluant modèle. La conversion dépend de la concentration en polluant, du taux d’humidité, de la température, de l’intensité lumineuse en UV et de la présence d’autres COV. La réaction est modélisée avec un modèle théorique surfacique de la réaction photocatalytique. Afin de prédire les performances d’un réacteur photocatalytique utilisant des films minces de TiOB2B, une méthodologie consistant à coupler l’écoulement et la réaction photocatalytique a été développée et validée. La distribution spatio-temporelle de la concentration en polluant est alors déterminée par une approche de mécanique des fluides numériques. La comparaison des résultats expérimentaux et des simulations obtenus avec un réacteur photocatalytique de laboratoire et un autre à l’échelle semi-pilote est très satisfaisante / VOCs are a source of discomfort for occupants and can have harmful effects on health. Photocatalysis is a promising process to remove these compounds. ArcelorMittal Liège Research has indeed developed TiOB2 Bthin film coated on steel which can be easily integrated into purification air systems. Objectives of this research are firstly, identifying parameters which influence the photocatalytic degradation of these VOCs using of such catalyst. Secondly, validate the possibility to predict performances of the photocatalytic reactor by combining fluid flow and photocatalytic reaction. An experimental set-up including an annular reactor has been designed and realized in order to conduct kinetic studies. Acetaldehyde has been chosen as a pollutant model and studied mainly with concentrations of few ppm ranges. Its conversion yield depends on pollutant concentration, relative humidity, temperature, UV light intensity and presence of others VOCs. Based on a theoretical surface model of the photocatalytic reaction, and using experimental data, this reaction is modelled. In order to predict performances of the photocatalytic reactor packed thin film of TiOB2B, a methodology which consists to combine fluid flow and photocatalytic reaction has been developed and validated. Space-time distribution of pollutant concentration is then determined with a computational fluid dynamics approach. Comparison between experimental data and numerical simulations obtained with a photocatalytic reactor at the laboratory scale and another one in semi-pilot scale are well satisfactory