Freiberg (Sachsen), Techn. Universiẗat, Diss., 2004.

Freiburg (Breisgau), University, Diss., 2002.

Universiẗat, Diss., 1999--Freiburg (Breisgau).

The aim of the present work is to clarify the interplay between the complex technological chain of crystal preparation, chemical and structural perfection of grown crystals of intermetallic compounds and oxides and their physical properties. This technological chain includes detailed studies of unknown or insufficiently known phase diagrams, their correlation with growth conditions and optimisation of process parameters for obtaining single crystals with high chemical and physical perfection. The measurements of the physical properties of the grown crystals such as superconductivity, thermoelectric or dielectric properties not only show new features and properties for application of the materials obtained, but also allow conclusions of the crystal perfection. The studies are focused on the following systems: RENi2B2C borocarbides (RE=Y, Tb or Ho) displaying superconductivity, magnetic order and a strong interplay between magnetic and superconducting properties for YNi2B2C, TbNi2B2C, HoNi2B2C, respectively; CeSi2-?Ô and Ru2Si3 as examples of systems with magnetic and promising thermoelectric properties, respectively; MgB2 and LiBC to test of theoretical predictions of the new superconducting intermetallic compounds discovered in the last years; SrTiO3 and SrZrO3 oxide compounds with special dielectric and optical properties. For this wide spectrum of substances necessarily different growth techniques were applied. That is mainly the floating zone (FZ) or travelling solvent floating zone (TSFZ) techniques with optical heating. Flux techniques were used if the vapour pressure of composing elements is high such as for Mg and Li. The crucible free FZ technique is very attractive for the crystal growth of these intermetallic and oxide compounds to avoid contamination with the crucible material, if the melts have very high chemical reactivity, high melting temperatures and if a large crystal size (at least 3-5 mm) is desired for corresponding physical measurements. One special aim in the presented work is the optimisation of the preparation and growth process features with respect to crystal perfection, establishing new relationships between process parameters, crystal perfection, crystallographic structure, composition of grown crystals and the related physical properties. Optimisation of crystal growth process requires own constitutional studies of growth relevant parts of corresponding multicomponent phase diagrams. Therefore, parts of the phase diagrams were experimentally revealed by differential thermal analysis (DTA), optical metallography and EPMA and partially combined with CALPHAD calculations.

The aim of the present work is to clarify the interplay between the complex technological chain of crystal preparation, chemical and structural perfection of grown crystals of intermetallic compounds and oxides and their physical properties. This technological chain includes detailed studies of unknown or insufficiently known phase diagrams, their correlation with growth conditions and optimisation of process parameters for obtaining single crystals with high chemical and physical perfection. The measurements of the physical properties of the grown crystals such as superconductivity, thermoelectric or dielectric properties not only show new features and properties for application of the materials obtained, but also allow conclusions of the crystal perfection. The studies are focused on the following systems: RENi2B2C borocarbides (RE=Y, Tb or Ho) displaying superconductivity, magnetic order and a strong interplay between magnetic and superconducting properties for YNi2B2C, TbNi2B2C, HoNi2B2C, respectively; CeSi2-?Ô and Ru2Si3 as examples of systems with magnetic and promising thermoelectric properties, respectively; MgB2 and LiBC to test of theoretical predictions of the new superconducting intermetallic compounds discovered in the last years; SrTiO3 and SrZrO3 oxide compounds with special dielectric and optical properties. For this wide spectrum of substances necessarily different growth techniques were applied. That is mainly the floating zone (FZ) or travelling solvent floating zone (TSFZ) techniques with optical heating. Flux techniques were used if the vapour pressure of composing elements is high such as for Mg and Li. The crucible free FZ technique is very attractive for the crystal growth of these intermetallic and oxide compounds to avoid contamination with the crucible material, if the melts have very high chemical reactivity, high melting temperatures and if a large crystal size (at least 3-5 mm) is desired for corresponding physical measurements. One special aim in the presented work is the optimisation of the preparation and growth process features with respect to crystal perfection, establishing new relationships between process parameters, crystal perfection, crystallographic structure, composition of grown crystals and the related physical properties. Optimisation of crystal growth process requires own constitutional studies of growth relevant parts of corresponding multicomponent phase diagrams. Therefore, parts of the phase diagrams were experimentally revealed by differential thermal analysis (DTA), optical metallography and EPMA and partially combined with CALPHAD calculations.