Several methods for evaluating the permittivity of soil samples using measurements in the time domain were studied. A number of algorithms for inverting the measured data to obtain epsilon were investigated and three different types of sampling devices were examined. The investigation examined the positive and negative aspects of three different types of sample holders to determine a method of obtaining dielectric information from in-situ time domain measurements. A scheme using a twin lead balun driven ground probe was proposed and analysed with regard to accuracy and sensitivity to measurement error. / Ph. D.

No / The terahertz frequency spectrum of pentaerythritol tetranitrate (PETN) is calculated using Discover[1] with the COMPASS[2] force field, CASTEP[3] and PWscf.[4] The calculations are compared to each other and to terahertz spectra (0.3-3 THz) of crystalline PETN recorded at 4 K. A number of analysis methods are used to characterise the calculated normal modes.

No description available.

京都大学 / 新制・課程博士 / 博士(理学) / 甲第25118号 / 理博第5025号 / 京都大学大学院理学研究科物理学・宇宙物理学専攻 / (主査)教授 前田 啓一, 准教授 野上 大作, 講師 LEEShiu Hang / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DFAM

<p dir="ltr">Terahertz Time Domain Spectroscopy (THz-TDS) is a powerful non-destructive, non-ionizing spectroscopic technique utilized for evaluating the optical properties of materials within the terahertz frequency range, spanning from 0.1 to 10 terahertz or wavelengths of 300 micron to 3000 micron. It effectively bridges the gap between microwave and infrared regions on the electromagnetic spectrum and its high resolution which avoiding scattering can quantify small changes in dielectric properties of media. It has high transmission through visibly opaque polymers and its ability to record both magnitude and phase information makes it a strong spectroscopic technique with applications in security, chemistry, electronics and telecommunication and non-destructive evaluation methods for solid mechanics.</p><p><br></p><p dir="ltr">This work introduces a polarization-dependent analytical model employing THz-TDS for computing strain in materials. The model establishes a correlation between volumetric strain and the change in time of arrival for a THz pulse, leveraging dielectrostrictive properties, variations in doping particle density, and changes in sample thickness due to Poisson’s effects. Validation of the analytical model is achieved through strain mapping of polydimethylsiloxane doped with highly dielectrostrictive strontium titanate (STO). Two experiments, including open-hole tensile and circular edge-notch specimens, demonstrate the efficacy of the model. Additionally, the study accounts for stress relaxation behavior to ensure measurement accuracy. Comparison of THz strain mapping results with finite element model (FEM) and surface strain measurements using digital image correlation (DIC) method highlights the technique's sensitivity to material features such as particle clumping and edge effects, while showcasing strong agreement with FEM and DIC results.</p><p><br></p><p dir="ltr">This analytical model is further expanded for experimentally mapping subsurface stress and strain in the adhesive layer of a single lap shear test. This in-situ non-destructive testing method pioneers the use of THz-TDS for stress estimation in the adhesive layer. Validation through strain mapping of STO doped Araldite 2011 epoxy adhesive with the analytical formulation is presented.</p><p dir="ltr">Finally, THz-TDS is applied for fracture front mapping in a double cantilever beam test with high-density polyethylene bonded with STO doped Araldite 2011. The phase-dependent model for mapping fracture fronts in the sub-surface adhesive layer involves analyzing convoluted waves due to interface resonances in a multi-layer structure using THz-TDS in transmission mode. The technique evaluates changes in dielectrostrictive properties and degree of separation to delineate fracture fronts. THz image enhancement algorithms facilitate crack front delineation. Error analysis on measured crack thickness is conducted to evaluate signal-to-noise ratio for THz-TDS. Additionally, an approach employing THz-TDS measured fracture propagation information for determining sub-surface stress maps in the adhesive layer and computing fracture toughness (G_Ic) is proposed. This work highlights the versatility and efficacy of THz-TDS in material characterization and stress/strain mapping in solid mechanics applications.</p>

The achievable accuracy of hygrothermal building component simulation is significantly dependent on the applied material functions. These functions are determined by the material modelling marking the connection between the basic storage and transport parameters which are obtained from basic measurements, and the storage and transport coefficients which are defined within the balance and flow equations. It is the aim of the present study to develop a flexible and widely applicable material model which is not restricted to the current level of the transport theory. Furthermore, limits and options of this model are to be validated by means of four building materials on the basis of special transient moisture profile measurements. The study’s starting point is a comprehensive investigation of both, the different existing modelling approaches and the available experimental methods to determine basic hygrothermal material parameters. On this basis, the material modelling is set into the context of the heat and moisture transport theory derived from thermodynamics. The involved limits and restrictions are highlighted and options as well as requirements for further developments are pointed out. The developments this study focuses on comprise three fields: experiments for basic property determination, material modelling, and experiments for material model validation. The set of basic material investigation methods has been extended by the drying experiment under defined conditions. The different influences on the drying as well as its application to hygrothermal material model calibration are pointed out and appraised. On this basis, a drying apparatus is designed, built and applied. Ultimately, standardisation criteria and the derivation of a single-value drying coefficient are evaluated. Appropriate extensions are indicated. Based on the bundle of tubes approach, an own material model is developed. It is coupled with a mechanistical approach accounting for serial and parallel structured moisture transport phenomena. The derived liquid water conductivity is adjusted by the help of measured conductivity data close to saturation as well as within the hygroscopic moisture range. Subsequently, two internal modelling parameters are calibrated which is done by numerical simulation of the water uptake and the drying experiment under consideration of the hysteresis of moisture storage. Facilitating its application to the obtained laboratory data, the material model has been implemented into a computer program. It is applied to the four building materials brick, lime-sand brick, aerated concrete and calcium silicate. The adjusted material functions are shown and discussed. In all four cases, the calibration provides an excellent agreement between measured and calculated material behaviour. As experimental basis of the material model validation, the instantaneous profile measurement technique (IPM) has been extended to be applied in Building Physics. Special equipment is developed and measurement procedures are designed. Different models to derive the water content from dielectric data obtained by Time Domain Reflectometry (TDR) measurements are evaluated and implemented. Ultimately, an extensive program of transient moisture profile measurements within the hygroscopic and the overhygroscopic moisture content range is conducted and evaluated. Within the frame of validation, the developments on the experimental as well as on the modelling fields are combined. The IPM experiments are recalculated on the basis of the measured initial and boundary conditions applying the adjusted and calibrated material functions. The comparison of measured and calculated data reveals the power of the developed material modelling just as the consequences of the simplifications made on the transport theory level. The distinct influences of the hysteresis of moisture storage consisting of effects depending on the process history and effects depending on the process dynamics, are proven. By the presented study, the material modelling has been decisively further developed, the set of basic measurement methods has been extended by a substantial experiment and the instantaneous profile measurement technique has been made applicable to Building Physics. Moreover, the influences of the process history and the process dynamics on the moisture transport and the resulting moisture profiles could be shown and proven. By that, not only a material model is now available which perfectly applies to the requirements of flexibility, applicability and extendability. The obtained data provides also a powerful basis for further research and development. / Die Genauigkeit hygrothermischer Bauteilsimulation hängt maßgeblich von den verwendeten Materialfunktionen ab. Sie werden durch die Materialmodellierung bestimmt, welche die Verbindung zwischen den aus Basisexperimenten gewonnenen Speicher- und Transportparametern sowie den innerhalb der Bilanz- und Flussgleichungen definierten Speicher- und Transportkoeffizienten herstellt. Ziel der vorliegenden Arbeit ist zum einen die Entwicklung eines flexiblen, breit anwendbaren und gleichzeitig nicht auf den gegenwärtigen Stand der Transporttheorie beschränkten Materialmodells. Dessen Grenzen und Möglichkeiten sollen zum anderen auf der Grundlage spezieller instationärer Feuchteprofilmessungen anhand von vier Baustoffen untersucht und aufgezeigt werden. Ausgangspunkt der Arbeit ist eine ausführliche Beleuchtung sowohl der vorhandenen Modellansätze als auch der zur Verfügung stehenden experimentellen Methoden zur Bestimmung hygrothermischer Basisparameter. Auf dieser Grundlage wird die Materialmodellierung in den Kontext der aus der Thermodynamik abgeleiteten Wärmeund Feuchtetransporttheorie eingeordnet. Die damit verbundenen Grenzen und Einschränkungen werden hervorgehoben und Entwicklungsmöglichkeiten sowie weiterer Entwicklungsbedarf aufgezeigt. Dieser umfasst drei Bereiche: die Experimente zur Bestimmung von Basisparametern, die Materialmodellierung, sowie Experimente zur Modellvalidierung. Die Reihe der Basisexperimente wird um den Trocknungsversuch unter definierten Bedingungen erweitert. Die verschiedenen Einflüsse auf die Trocknung und deren Anwendung in der Kalibrierung hygrothermischer Materialmodellierung werden herausgestellt und bewertet. Darauf aufbauend wird eine Apparatur entworfen, gebaut und angewendet. Schließlich werden Kriterien zur Standardisierung und Ableitung eines Einzahlenkennwertes evaluiert. Sinnvolle Erweiterungen werden aufgezeigt. Es wird ein eigenes Materialmodell auf der Grundlage eines Porenbündelansatzes hergeleitet, welches mit einem mechanistischen Ansatz gekoppelt wird, der den Feuchtetransport in seriell und parallel strukturierte Bereiche untergliedert. Die abgeleitete Flüssigwasserleitfähigkeit wird anhand von Leitfähigkeitsmessdaten im nahe gesättigten sowie im hygroskopischen Feuchtebereich justiert. Zwei interne Modellparameter werden anschließend unter Berücksichtigung der Hysterese der Feuchtespeicherung anhand des Aufsaug- und des Trocknungsversuches kalibriert. Das Materialmodell ist zur Erleichterung der Anwendung in ein Computerprogramm zur Anpassung an die Labordaten implementiert worden. Das Programm wird auf die vier Baustoffe Ziegel, Kalksandstein, Porenbeton und Calciumsilikat angewendet. Die entsprechend angepassten Materialfunktionen werden gezeigt und diskutiert. Im Rahmen der Kalibrierung wird eine hervorragende Übereinstimmung zwischen gemessenem und berechnetem Materialverhalten erreicht. Zur Modellvalidierung wird die Augenblicksprofilmethode (IPM) für die bauphysikalische Anwendung erweitert. Spezielle Apparaturen werden entwickelt und Versuchsabläufe entworfen. Modelle zur Ableitung des Wassergehaltes aus mit Hilfe der Time Domain Reflectometry (TDR) gewonnenen Dielektrizitätsmessdaten werden evaluiert und implementiert. Schließlich wird ein umfangreiches Programm an Feuchteprofilmessungen im hygroskopischen und überhygroskopischen Feuchtebereich umgesetzt und ausgewertet. Im Rahmen der Validierung werden die Entwicklungen auf experimenteller sowie auf Modellierungsebene zusammengeführt. Die IPM Experimente werden anhand der gemessenen Anfangs- und Randbedingungen und auf der Grundlage der angepassten und kalibrierten Materialfunktionen nachgerechnet. Der Vergleich zwischen Messung und Rechnung offenbart die Stärke der entwickelten Materialmodellierung ebenso, wie den Einfluss der auf Ebene der Transporttheorie getroffenen Vereinfachungen. Ein deutlicher Einfluss der sich aus der Prozessgeschichte sowie der Prozessdynamik zusammensetzenden Hysterese der Feuchtespeicherung kann nachgewiesen werden. Mit der vorliegenden Arbeit ist somit nicht nur die Materialmodellierung entscheidend weiterentwickelt, die Reihe der einfachen Basisexperimente um einen wesentlichen Versuch erweitert und die Augenblicksprofilmethode für bauphysikalische Belange anwendbar gemacht worden, es wurden auch die Einflüsse der Prozessgeschichte, und erstmals auch der Prozessdynamik, auf den Feuchtetransport sowie die sich einstellenden Feuchteprofile deutlich aufgezeigt und nachgewiesen. Es ist demnach nicht nur ein Materialmodell, welches den gestellten Anforderungen an Flexibilität, breite Anwendbarkeit und Erweiterbarkeit genügt, entwickelt worden, es wird mit den gewonnenen Messdaten auch die Grundlage weiterer Forschung zur Verfügung gestellt.

This thesis presents the research results on the development of a microwave tomography imaging algorithm capable of reconstructing the dielectric properties of the unknown object. Our focus was on the theoretical aspects of the non-linear tomographic image reconstruction problem with particular emphasis on developing efficient numerical and non-linear optimization for solving the inverse scattering problem. A detailed description of a novel microwave tomography method based on frequency dependent finite difference time domain, a numerical method for solving Maxwell's equations and Genetic Algorithm (GA) as a global optimization technique is given. The proposed technique has the ability to deal with the heterogeneous and dispersive object with complex distribution of dielectric properties and to provide a quantitative image of permittivity and conductivity profile of the object. It is shown that the proposed technique is capable of using the multi-frequency, multi-view, and multi-incident planer techniques which provide useful information for the reconstruction of the dielectric properties profile and improve image quality. In addition, we show that when a-priori information about the object under test is known, it can be easily integrated with the inversion process. This provides realistic regularization of the solution and removes or reduces the possibility of non-true solutions. We further introduced application of the GA such as binary-coded GA, real-coded GA, hybrid binary and real coded GA, and neural-network/GA for solving the inverse scattering problem which improved the quality of the images as well as the conversion rate. The implications and possible advantages of each type of optimization are discussed, and synthetic inversion results are presented. The results showed that the proposed algorithm was capable of providing the quantitative images, although more research is still required to improve the image quality. In the proposed technique the computation time for solution convergence varies from a few hours to several days. Therefore, the parallel implementation of the algorithm was carried out to reduce the runtime. The proposed technique was evaluated for application in microwave breast cancer imaging as well as measurement data from university of Manitoba and Institut Frsenel's microwave tomography systems.

This thesis presents the research results on the development of a microwave tomography imaging algorithm capable of reconstructing the dielectric properties of the unknown object. Our focus was on the theoretical aspects of the non-linear tomographic image reconstruction problem with particular emphasis on developing efficient numerical and non-linear optimization for solving the inverse scattering problem. A detailed description of a novel microwave tomography method based on frequency dependent finite difference time domain, a numerical method for solving Maxwell's equations and Genetic Algorithm (GA) as a global optimization technique is given. The proposed technique has the ability to deal with the heterogeneous and dispersive object with complex distribution of dielectric properties and to provide a quantitative image of permittivity and conductivity profile of the object. It is shown that the proposed technique is capable of using the multi-frequency, multi-view, and multi-incident planer techniques which provide useful information for the reconstruction of the dielectric properties profile and improve image quality. In addition, we show that when a-priori information about the object under test is known, it can be easily integrated with the inversion process. This provides realistic regularization of the solution and removes or reduces the possibility of non-true solutions. We further introduced application of the GA such as binary-coded GA, real-coded GA, hybrid binary and real coded GA, and neural-network/GA for solving the inverse scattering problem which improved the quality of the images as well as the conversion rate. The implications and possible advantages of each type of optimization are discussed, and synthetic inversion results are presented. The results showed that the proposed algorithm was capable of providing the quantitative images, although more research is still required to improve the image quality. In the proposed technique the computation time for solution convergence varies from a few hours to several days. Therefore, the parallel implementation of the algorithm was carried out to reduce the runtime. The proposed technique was evaluated for application in microwave breast cancer imaging as well as measurement data from university of Manitoba and Institut Frsenel's microwave tomography systems.

The finite element method (FEM) is a widely-used numerical tool in the fields of structural dynamics, acoustics and electromagnetics. In this work, our goal is to develop robust FEM strategies for solving problems in the areas of acoustics, structures and electromagnetics, and then extend these strategies to solve multi-physics problems such as magnetohydrodynamics and structural acoustics. We now briefly describe the finite element strategies developed in each of the above domains. In the structural domain, we show that the trapezoidal rule, which is a special case of the Newmark family of algorithms, conserves linear and angular momenta and energy in the case of undamped linear elastodynamics problems, and an ‘energy-like measure’ in the case of undamped acoustic problems. These conservation properties, thus, provide a rational basis for using this algorithm. In linear elastodynamics variants of the trapezoidal rule that incorporate ‘high-frequency’ dissipation are often used, since the higher frequencies, which are not approximated properly by the standard displacement-based approach, often result in unphysical behavior. Instead of modifying the trapezoidal algorithm, we propose using a hybrid FEM framework for constructing the stiffness matrix. Hybrid finite elements, which are based on a two-field variational formulation involving displacement and stresses, are known to approximate the eigenvalues much more accurately than the standard displacement-based approach, thereby either bypassing or reducing the need for high-frequency dissipation. We show this by means of several examples, where we compare the numerical solutions obtained using the displacementbased and hybrid approaches against analytical solutions. We also present a monolithic formulation for the solution of structural acoustic problems based on the hybrid finite element approach. In the area of electromagnetics, since our goal is to ultimately couple the electromagnetic analysis with structural or fluid variables in a ‘monolithic’ framework, we focus on developing nodal finite elements rather than using ‘edge elements’. It is well-known that conventional nodal finite elements can give rise to spurious solutions, and that they cannot capture singularities when the domains are nonconvex and have sharp corners. The commonly used remedies of either adding a penalty term or using a potential formulation are unable to address these problems satisfactorily. In order to overcome this problem, we first develop several mixed finite elements in two and three dimensions which predict the eigenfrequencies (including their multiplicities) accurately, even for non-convex domains. In this proposed formulation, no ad-hoc terms are added as in the penalty formulation, and the improvement is achieved purely by an appropriate choice of the finite element spaces for the different variables. For inhomogeneous domains, ‘double noding’ is used to enforce the appropriate continuity conditions at an interface. Although the developed mixed FEM works very accurately for all 2D geometries and regular Cartesian 3D geometries, it has so far not yielded success for curved 3D geometries. Therefore, for 3D harmonic and transient analysis problems, we propose and use a modified form of the potential formulation that overcomes the disadvantages of the standard potential method, especially on non-convex domains. Electromagnetic radiation and scattering in an exterior domain traditionally involved imposing a suitable absorbing boundary condition (ABC) on the truncation boundary of the numerical domain to inhibit reflection from it. In this work, based on the Wilcox asymptotic expansion of the electric far-field, we propose an amplitude formulation within the framework of the nodal FEM, whereby the highly oscillatory radial part of the field is separated out a-priori so that the standard Lagrange interpolation functions have to capture a relatively gently varying function. Since these elements can be used in the immediate vicinity of the radiator or scatterer (with few exceptions which we enumerate), it is more effective compared to methods of imposing ABCs, especially for high-frequency problems. We show the effectiveness of the proposed formulation on a wide variety of radiation and scattering problems involving both conducting and dielectric bodies, and involving both convex and non-convex domains with sharp corners. The Time Domain Finite Element Method (TDFEM) has been used extensively to solve transient electromagnetic radiation and scattering problems. Although conservation of energy in electromagnetics is well-known, we show in this work that there are additional quantities that are also conserved in the absence of loading. We then show that the developed time-stepping strategy (which is closely related to the trapezoidal rule) mimics these continuum conservation properties either exactly or to a very good approximation. Thus, the developed numerical strategy can be said to be ‘unconditionally stable’ (from an energy perspective) allowing the use of arbitrarily large time-steps. We demonstrate the high accuracy and robustness of the developed method for solving both interior and exterior domain radiation problems, and for finding the scattered field from conducting and dielectric bodies. In the field of magneto-hydrodynamics, we develop a monolithic strategy based on a continuous velocity-pressure formulation that is known to satisfy the Babuska-Brezzi (BB) conditions. The magnetic field is interpolated in the same way as the velocity field, and the entire formulation is within a nodal finite element framework. Both transient and steady-state formulations are developed for two- and three-dimensional geometries. An exact linearization of the monolithic strategy ensures that rapid (quadratic) convergence is achieved within each time (or load) step, while the stable nature of the interpolations used ensure that no instabilities arise in the solution. Good agreement with analytical solutions, even with the use of very coarse meshes, shows the efficacy of the developed formulation.

The achievable accuracy of hygrothermal building component simulation is significantly dependent on the applied material functions. These functions are determined by the material modelling marking the connection between the basic storage and transport parameters which are obtained from basic measurements, and the storage and transport coefficients which are defined within the balance and flow equations. It is the aim of the present study to develop a flexible and widely applicable material model which is not restricted to the current level of the transport theory. Furthermore, limits and options of this model are to be validated by means of four building materials on the basis of special transient moisture profile measurements. The study’s starting point is a comprehensive investigation of both, the different existing modelling approaches and the available experimental methods to determine basic hygrothermal material parameters. On this basis, the material modelling is set into the context of the heat and moisture transport theory derived from thermodynamics. The involved limits and restrictions are highlighted and options as well as requirements for further developments are pointed out. The developments this study focuses on comprise three fields: experiments for basic property determination, material modelling, and experiments for material model validation. The set of basic material investigation methods has been extended by the drying experiment under defined conditions. The different influences on the drying as well as its application to hygrothermal material model calibration are pointed out and appraised. On this basis, a drying apparatus is designed, built and applied. Ultimately, standardisation criteria and the derivation of a single-value drying coefficient are evaluated. Appropriate extensions are indicated. Based on the bundle of tubes approach, an own material model is developed. It is coupled with a mechanistical approach accounting for serial and parallel structured moisture transport phenomena. The derived liquid water conductivity is adjusted by the help of measured conductivity data close to saturation as well as within the hygroscopic moisture range. Subsequently, two internal modelling parameters are calibrated which is done by numerical simulation of the water uptake and the drying experiment under consideration of the hysteresis of moisture storage. Facilitating its application to the obtained laboratory data, the material model has been implemented into a computer program. It is applied to the four building materials brick, lime-sand brick, aerated concrete and calcium silicate. The adjusted material functions are shown and discussed. In all four cases, the calibration provides an excellent agreement between measured and calculated material behaviour. As experimental basis of the material model validation, the instantaneous profile measurement technique (IPM) has been extended to be applied in Building Physics. Special equipment is developed and measurement procedures are designed. Different models to derive the water content from dielectric data obtained by Time Domain Reflectometry (TDR) measurements are evaluated and implemented. Ultimately, an extensive program of transient moisture profile measurements within the hygroscopic and the overhygroscopic moisture content range is conducted and evaluated. Within the frame of validation, the developments on the experimental as well as on the modelling fields are combined. The IPM experiments are recalculated on the basis of the measured initial and boundary conditions applying the adjusted and calibrated material functions. The comparison of measured and calculated data reveals the power of the developed material modelling just as the consequences of the simplifications made on the transport theory level. The distinct influences of the hysteresis of moisture storage consisting of effects depending on the process history and effects depending on the process dynamics, are proven. By the presented study, the material modelling has been decisively further developed, the set of basic measurement methods has been extended by a substantial experiment and the instantaneous profile measurement technique has been made applicable to Building Physics. Moreover, the influences of the process history and the process dynamics on the moisture transport and the resulting moisture profiles could be shown and proven. By that, not only a material model is now available which perfectly applies to the requirements of flexibility, applicability and extendability. The obtained data provides also a powerful basis for further research and development. / Die Genauigkeit hygrothermischer Bauteilsimulation hängt maßgeblich von den verwendeten Materialfunktionen ab. Sie werden durch die Materialmodellierung bestimmt, welche die Verbindung zwischen den aus Basisexperimenten gewonnenen Speicher- und Transportparametern sowie den innerhalb der Bilanz- und Flussgleichungen definierten Speicher- und Transportkoeffizienten herstellt. Ziel der vorliegenden Arbeit ist zum einen die Entwicklung eines flexiblen, breit anwendbaren und gleichzeitig nicht auf den gegenwärtigen Stand der Transporttheorie beschränkten Materialmodells. Dessen Grenzen und Möglichkeiten sollen zum anderen auf der Grundlage spezieller instationärer Feuchteprofilmessungen anhand von vier Baustoffen untersucht und aufgezeigt werden. Ausgangspunkt der Arbeit ist eine ausführliche Beleuchtung sowohl der vorhandenen Modellansätze als auch der zur Verfügung stehenden experimentellen Methoden zur Bestimmung hygrothermischer Basisparameter. Auf dieser Grundlage wird die Materialmodellierung in den Kontext der aus der Thermodynamik abgeleiteten Wärmeund Feuchtetransporttheorie eingeordnet. Die damit verbundenen Grenzen und Einschränkungen werden hervorgehoben und Entwicklungsmöglichkeiten sowie weiterer Entwicklungsbedarf aufgezeigt. Dieser umfasst drei Bereiche: die Experimente zur Bestimmung von Basisparametern, die Materialmodellierung, sowie Experimente zur Modellvalidierung. Die Reihe der Basisexperimente wird um den Trocknungsversuch unter definierten Bedingungen erweitert. Die verschiedenen Einflüsse auf die Trocknung und deren Anwendung in der Kalibrierung hygrothermischer Materialmodellierung werden herausgestellt und bewertet. Darauf aufbauend wird eine Apparatur entworfen, gebaut und angewendet. Schließlich werden Kriterien zur Standardisierung und Ableitung eines Einzahlenkennwertes evaluiert. Sinnvolle Erweiterungen werden aufgezeigt. Es wird ein eigenes Materialmodell auf der Grundlage eines Porenbündelansatzes hergeleitet, welches mit einem mechanistischen Ansatz gekoppelt wird, der den Feuchtetransport in seriell und parallel strukturierte Bereiche untergliedert. Die abgeleitete Flüssigwasserleitfähigkeit wird anhand von Leitfähigkeitsmessdaten im nahe gesättigten sowie im hygroskopischen Feuchtebereich justiert. Zwei interne Modellparameter werden anschließend unter Berücksichtigung der Hysterese der Feuchtespeicherung anhand des Aufsaug- und des Trocknungsversuches kalibriert. Das Materialmodell ist zur Erleichterung der Anwendung in ein Computerprogramm zur Anpassung an die Labordaten implementiert worden. Das Programm wird auf die vier Baustoffe Ziegel, Kalksandstein, Porenbeton und Calciumsilikat angewendet. Die entsprechend angepassten Materialfunktionen werden gezeigt und diskutiert. Im Rahmen der Kalibrierung wird eine hervorragende Übereinstimmung zwischen gemessenem und berechnetem Materialverhalten erreicht. Zur Modellvalidierung wird die Augenblicksprofilmethode (IPM) für die bauphysikalische Anwendung erweitert. Spezielle Apparaturen werden entwickelt und Versuchsabläufe entworfen. Modelle zur Ableitung des Wassergehaltes aus mit Hilfe der Time Domain Reflectometry (TDR) gewonnenen Dielektrizitätsmessdaten werden evaluiert und implementiert. Schließlich wird ein umfangreiches Programm an Feuchteprofilmessungen im hygroskopischen und überhygroskopischen Feuchtebereich umgesetzt und ausgewertet. Im Rahmen der Validierung werden die Entwicklungen auf experimenteller sowie auf Modellierungsebene zusammengeführt. Die IPM Experimente werden anhand der gemessenen Anfangs- und Randbedingungen und auf der Grundlage der angepassten und kalibrierten Materialfunktionen nachgerechnet. Der Vergleich zwischen Messung und Rechnung offenbart die Stärke der entwickelten Materialmodellierung ebenso, wie den Einfluss der auf Ebene der Transporttheorie getroffenen Vereinfachungen. Ein deutlicher Einfluss der sich aus der Prozessgeschichte sowie der Prozessdynamik zusammensetzenden Hysterese der Feuchtespeicherung kann nachgewiesen werden. Mit der vorliegenden Arbeit ist somit nicht nur die Materialmodellierung entscheidend weiterentwickelt, die Reihe der einfachen Basisexperimente um einen wesentlichen Versuch erweitert und die Augenblicksprofilmethode für bauphysikalische Belange anwendbar gemacht worden, es wurden auch die Einflüsse der Prozessgeschichte, und erstmals auch der Prozessdynamik, auf den Feuchtetransport sowie die sich einstellenden Feuchteprofile deutlich aufgezeigt und nachgewiesen. Es ist demnach nicht nur ein Materialmodell, welches den gestellten Anforderungen an Flexibilität, breite Anwendbarkeit und Erweiterbarkeit genügt, entwickelt worden, es wird mit den gewonnenen Messdaten auch die Grundlage weiterer Forschung zur Verfügung gestellt.