No / A heterogeneous hybrid computational electromagnetics method is presented, which enables different parts of an antenna simulation problem to be treated by different methods, thus enabling the most appropriate method to be used for each part. The method uses a standard frequency-domain moment-method program and a finite-difference time-domain program to compute the fields in two regions. The two regions are interfaced by surfaces on which effective sources are defined by application of the Equivalence Principle. An extension to this permits conduction currents to cross the boundary between the different computational domains. Several validation cases are examined and the results compared with available data. The method is particularly suitable for simulation of the behavior of an antenna that is partially buried, or closely coupled with lossy dielectric volumes such as soil, building structures or the human body.

Ultra-wideband (UWB) communication has been the subject of extensive research in recent years due to its unique capabilities and potential applications, particularly in short-range multiple access wireless communications. However, many important aspects of UWB-based communication systems have not yet been thoroughly investigated. The propagation of UWB signals in indoor environments is the single most important issue with significant impacts on the future direction, scope, and generally the extent of the success of UWB technology. The objective of this dissertation is to obtain a more thorough and comprehensive understanding of the potentials of UWB technology by characterizing the UWB communication channels. Channel characterization refers to extracting the channel parameters from measured data. The extracted parameters are used to quantify the effect of the channel on communication UWB systems using this channel as signal transmission medium. Data are measured in different ways using a variety of time-domain and frequency-domain techniques. The experimental setups used in channel characterization effort also include pulse generators and antennas as integral parts of the channel, since the pulse shape and antenna characteristics have significant impact on channel parameters. At a fundamental level, the propagation of UWB signals, as any electromagnetic wave, is governed, among other things, by the properties of materials in the propagation medium. One of the objectives of this research is to examine propagation through walls made of typical building materials and thereby acquire ultra-wideband characterization of these materials. The loss and the dielectric constant of each material are measured over a frequency range of 1 to 15 GHz. Ten commonly used building materials are chosen for this investigation. These include, dry wall, wallboard, structure wood, glass sheet, bricks, concrete blocks, reinforced concrete (as pillar), cloth office partition, wooden door, and styrofoam slab. The work on ultra-wideband characterization of building materials resulted in an additional interesting contribution. A new formulation for evaluating the complex dielectric constant of low-loss materials, which involves solving real equations and thus requiring only one-dimensional root searching techniques, was found. The results derived from the exact complex equation and from the new formulation are in excellent agreement. Following the characterization of building materials, an indoor UWB measurement campaign is undertaken. Typical indoor scenarios, including line-of-sight (LOS), non-line-of-sight (NLOS), room-to-room, within-the-room, and hallways, are considered. Results for indoor propagation measurements are presented for local power delay profiles (local-PDP) and small-scale averaged power delay profiles (SSA-PDP). Site-specific trends and general observations are discussed. The results for pathloss exponent and time dispersion parameters are presented. The analyses results indicate the immunity of UWB signals to multipath fading. The results also clearly show that UWB signals, unlike narrowband signals, do not suffer from small scale fading, unless the receiver is too close to walls. Multipath components are further studies by employing a deconvolution technique. The application of deconvolution results in resolving multipath components with waveforms different from those of the sounding pulse. Resolving more components can improve the design of the rake receiver. The final part of this research elaborates on the nature of multiple access interference and illustrates the application of multi-user detection to improve the performance of impulse radio systems. Measured dispersion parameters and their effects on the multiple access parameters are discussed. / Ph. D.

A desirable goal in wireless communication systems is to achieve a high-rate data transmission through electrically small antennas. However, the overall transmission bandwidth is limited by the antenna size. As a well-known physical limitation, maximum achievable bandwidth of a small antenna is governed by the fundamental limit which defines a lower bound on the antenna quality factor. This limit is a function of electrical size of the antenna and therefore, as the antenna shrinks in size the bandwidth decreases as well. This dissertation presents a new technique to decouple the impedance bandwidth of a high-Q antenna from the information bandwidth in order to provide a wideband data-transmission. This technique controls the natural resonant frequencies of an electrically small antenna in a time-varying fashion such that ultra-fast frequency-shift keying modulation can be achieved regardless of the narrow bandwidth of the antenna. A major advantage of the proposed technique is that the high-Q property of a miniaturized antenna is a desirable design parameter rather than a limiting factor. Therefore, the antenna size can be reduced as much as required. It is shown that if the fundamental resonance of an antenna is shifted in time, the frequency of the near-zone fields which construct the reactive stored energy, changes momentarily and hence, the radiating fields track any instantaneous variation of the antenna fundamental resonance. This characteristic is utilized to employ a single-mode high-Q antenna in the transient state and modulate the fundamental resonant frequency according to the baseband data information. This approach leads to a new class of compact transmitters with a minimized architecture and high data-rate transmission capability. / Ph. D.

All interfaces offer resistance to heat transport. As the size of a device or structure approaches nanometer lengthscales, the contribution of the interface thermal resistance often becomes comparable to the intrinsic thermal resistance offered by the device or structure itself. In many microelectronic devices, heat has to transfer across a metal-nonmetal interface, and a better understanding about the origins of this interface thermal conductance (inverse of the interface thermal resistance) is critical in improving the performance of these devices. In this dissertation, heat transport across different metal-nonmetal interfaces are investigated with the primary goal of gaining qualitative and quantitative insight into the heat transport mechanisms across such interfaces. A time-domain thermoreflectance (TDTR) system is used to measure the thermal properties at the nanoscale. TDTR is an optical pump-probe technique, and it is capable of measuring thermal conductivity, k, and interface thermal conductance, G, simultaneously. The first study examines k and G for amorphous and crystalline Zr47Cu31Al13Ni9 metallic alloys that are in contact with poly-crystalline Y2O3. The motivation behind this study is to determine the relative importance of energy coupling mechanisms such as electron-phonon or phonon-phonon coupling across the interface by changing the material structure (from amorphous to crystalline), but not the composition. From the TDTR measurements k=4.5 W m-1 K-1 for the amorphous metallic glass of Zr47Cu31Al13Ni9, and k=5.0 W m-1 K-1 for the crystalline Zr47Cu31Al13Ni9. TDTR also gives G=23 MW m-2 K-1 for the metallic glass/Y2O3 interface and G=26 MW m-2 K-1 for the interface between the crystalline Zr47Cu31Al13Ni9 and Y2O3. The thermal conductivity of the poly-crystalline Y2O3 layer is found to be k=5.0 W m-1 K-1. Despite the small difference between k and G for the two alloys, the results are repeatable and they indicate that the structure of the alloy plays a role in the electron-phonon coupling and interface conductance. The second experimental study examines the effect of nickel nanoparticle size on the thermal transport in multilayer nanocomposites. These nanocomposites consist of five alternating layers of nickel nanoparticles and yttria stabilized zirconia (YSZ) spacer layers that are grown with pulsed laser deposition. Using TDTR, thermal conductivities of k=1.8, 2.4, 2.3, and 3.0 W m-1 K-1 are found for nanocomposites with nickel nanoparticle diameters of 7, 21, 24, and 38 nm, respectively, and k=2.5 W m-1 K-1 for a single 80 nm thick layer of YSZ. The results indicate that the overall thermal conductivity of these nanocomposites is strongly influenced by the Ni nanoparticle size and the interface thermal conductance between the Ni particles and the YSZ matrix. An effective medium theory is used to estimate the lower limits for the interface thermal conductance between the nickel nanoparticles and the YSZ matrix (G>170 MW m-2 K-1), and the nickel nanoparticle thermal conductivity. / Ph. D.

Yes / The potentially broad application area in engineering design using Genetic Algorithm (GA) has been widely adopted by many researchers due to its high consistency and accuracy. Presented here is the initial design of a wideband non-dispersive wire bow-tie antenna using GA for breast cancer detection applications. The ultimate goal of this design is to achieve minimal late-time ringing but at higher frequencies such as that located from 4 to 8 GHz, in which is desire to penetrate human tissue for near field imaging. Resistively loading method to reduce minimal ringing caused by the antenna internal reflections is implemented and discussed when the antenna is located in free space and surrounded by lossy medium. Results with optimised antenna geometry and different number of resistive loads are presented and compared with and without existence of scatterers.

Multipath on far-field antenna ranges causes distortion of antenna pattern measurements: The multi path components have differing path lengths and hence can be separated by illuminating the antenna under test with short-duration pulses. Alternatively, antenna measurements can be made in the frequency domain, and the Fourier transform can be used to relate the frequency-domain measurements to the antenna's time-domain response. The interference then can be removed with a time-domain gate, and transformed back into the frequency domain to yield improved CW antenna patterns. Virginia Tech has recently completed a major upgrade of their far-field antenna range and implemented a system to perform this data collection and data processing. This thesis describes the principles and implementation of the time-domain processing part of the system. Further, it demonstrates the validity of the method by showing the improvements in pattern measurement that have been achieved with the new system. / Master of Science

Dielectric constant is a physical property of soil that is often measured using non-invasive geophysical techniques in subsurface characterization studies. A proper understanding of dielectric responses allows investigators to make measurements that might otherwise require more invasive and/or destructive methods. Previous studies have suggested that dielectric models could be refined by accounting for the contributions of different types of mineral constituents that affect the ratio and properties of bound and bulk water. This study tested the hypothesis that the dielectric responses of porous materials are mineral-specific through differences in surface area and chemistry. An experimental design was developed to test the dielectric behavior of pure quartz sand (Control), quartz sand/kaolin clay mixtures and ferric oxyhydroxide coated quartz sand. Results from the experiments show that the dielectric responses of quartz-clay and iron oxyhydroxide modified samples are not significantly different from the pure quartz Control. Increasing clay content in quartz sands leads to a vertical displacement between fitted polynomials. The results suggest that the classic interpretation for the curvature of dielectric responses appears to be incorrect. The curvature of dielectric responses at low water contents appears to be controlled by unknown parameters other than bound water. A re-examination of the experimental procedure proposed in this study and past studies shows that a properly designed study of bound water effects on dielectric responses has not yet been conduct / Master of Science

An experimental method for determination and analysis of the impulse response function of linear, elastic, vibrating systems is developed. A deconvolution method is developed for estimation of the impulse response function. The estimator is shown to be unbiased in the presence of measurement noise. Modal parameters are extracted from impulse response estimates using a modification of the Pisarenko harmonic decomposition method. The advantages of a time-domain approach over traditional Fourier analysis procedures, including avoidance of leakage and enhanced statistical significance, are described. Several tests used to determine the performance of the impulse response estimator are described, and the results of these tests, are presented. It is shown that the method can provide accurate estimates of modal parameters even for short data sets or high noise levels. / Master of Science

The development of the High Frequency Power MOSFET has brought about a need for accurate models. Now that the frequency range of these MOSFETs is in domains where typically scattering parameter measurements are used, a broad band device model can prove to be extremely useful. This thesis summarizes the research performed towards the development of a wideband Gate model for the Motorola MRF162 High Frequency Power Transistor. The device theory for typical MOSFETs will be explained. This theory will lead into the development of the Power MOSFET and its associated frequency limitations. The benefits of Time Domain Techniques will be explained and how a wideband model is achieved from this technique. The result from the analysis of the measurements and the device theory is a wideband Gate model developed for the frequency range from 100MHz to 400MHz. Verification is achieved by curve matching the measured Time Domain Reflected waveforms with the simulated waveforms generated using a proprietary program Modified Transient Analysis Program (MTCAP) and by comparison of expected and simulated parasitic values. / Master of Science

A calibration technique for time domain reflectometry and transmission (TDR and TDT) measurement system as applied to network analysis is presented. The calibration corrects for the errors caused by the response of the measurement system. A complete physically-based model has been established for the system. A set of calculable standards has been developed to satisfy the time domain requirements for calibration. The calibration technique was applied to determining the model parameters of a commercial TDR and TDT system. The errors of modeling and de-embedding are analyzed. The calibration enhanced the system bandwidth from 8 GHz to about 20 GHz. Experimental verification is given to demonstrate the validity and accuracy of the calibration technique. / Ph. D.