This thesis has described a wide tuning range transconductor combining source degeneration, cross-coupled, translinear loop to achieve high linearity. The transconductance tuning range from 220£gs to 1050£gs with 1V input range and the total harmonic distortion is -50dB with 0.6Vpp input voltage. And its application to a fifth-order elliptic low-pass Gm-C filter for the front-end RF circuit is presented. In order to transform the passive element circuit into a Gm-C based filter, a GIC flow method has been used. The proposal Gm-C based filter achieve a with performance a low frequency filtering range from 5Mhz to 10Mhz by transconductance tuning.

No description available.

No description available.

Au cours de ces dernières années, les chercheurs ont démontré l’importance de l’accordabilité dans les systèmes de télécommunications fonctionnant pour des multiples bandes de fréquences, afin de réduire leur complexité et leur coût. Ce travail se focalise sur des filtres innovants accordables optiquement et propose ainsi une solution alternative aux méthodes plus classiques comme les MEMS ou les diodes. Cette thèse retrace la conception de trois résonateurs pouvant être de bons candidats à intégrer dans le système accordable optiquement développé au travers du manuscrit. Ces éléments sont conçus par le biais de différentes technologies comme : la technologie « Substrate Integrated Waveguide » combinée avec un effet dit métamatériau et la méthode de cavité chargée par un plot capacitif. Tous ces résonateurs ont été créés dans le but d’avoir des performances intéressantes pour trois critères : le facteur de qualité à vide (Q0), la plage d’accord (TR) et la taille. La dernière partie, quant à elle, se consacre au système d’accordabilité basé sur l’utilisation de capacité CMS et de switches RF contrôlés optiquement et fabriqués à l’aide de la technologie silicium CMOS. Plusieurs méthodes ont été utilisées afin d’améliorer les pertes d’insertion des switches RF et par conséquent les performances du système global, démontrant la faisabilité de ce concept innovant accordable optiquement. / Researchers have demonstrated over the last decade the importance of tunability to reduce the complexity and the cost of telecommunication systems operating at multiple frequency bands and standards. This work focuses on novel optically tunable filters for microwave applications and therefore proposes alternative solution to commonly used tuning methods such as MEMS or diodes. The thesis has investigated different resonators for having good candidates for the novel optically tunable system developed throughout this manuscript. Different technologies are used to design such components, namely: Substrate Integrated Waveguide (SIW) technology combined with metamaterial effect and cavity loading. All manufactured resonators are designed to be balanced between three features: the unloaded quality factor (Q0), the tuning range (TR) and the size. The last part deals with the tuning system based on SMT capacitance and optically controlled RF switches based on Si CMOS technology. Several methods have been used to improve the insertion loss of manufactured switches and therefore the performance of the whole system, demonstrating the feasibility of this novel optically based tunable concept.

This thesis introduces, for the first time, a novel 4-bit, metal-oxide-metal (MOM) digital capacitor switching array (MOMDCSA) which has been implemented into a wideband CMOS voltage controlled oscillator (VCO) for 5 GHz WiMAX/WLAN applications. The proposed MOMDCSA is added both in series and parallel to nMOS varactors. For further gain linearity, a wider tuning range and minor phase noise variations, this varactor bank is connected in parallel to four nMOS varactor pairs, each of which is biased at a different voltage. Thus, VCO tuning gain reduces and optimal phase noise variation is obtained across a wide range of frequencies. Based on this premise, a wideband VCO is achieved with low phase noise variation of less than 4.7 dBc/Hz. The proposed VCO has been designed using UMC 130 nm CMOS technology. It operates from 3.45 GHz to 6.23 GHz, with a phase noise of -133.80 dBc/Hz at a 1 MHz offset, a figure of merit (FoM) of -203.5 dBc/Hz. A novel microstrip low-phase noise oscillator is based on a left-handed (LH) metamaterial bandpass filter which is embedded in the feedback loop of the oscillator. The oscillator is designed at a complex quality factor Qsc peak frequency, to achieve excellent phase noise performance. At a centre frequency of 2.05 GHz, the reported oscillator demonstrates, experimentally, a phase noise of -126.7 dBc/Hz at a 100 kHz frequency offset and a FoM of -207.2 dBc/Hz at a 1 MHz frequency offset. The increasing demands have been placed on the electromagnetic compatibility performance of VCO devices is crucial. Therefore, this thesis extends the potential of highly flexible and conductive graphene laminate to the application of electromagnetic interference (EMI) shielding. Graphene nanoflake-based conductive ink is printed on paper, and then it is compressed to form graphene laminate with a conductivity of 0.43×105 S/m. Shielding effectiveness is experimentally measured at above 32 dB as being between 12GHz and 18GHz, even though the thickness of the graphene laminate is only 7.7µm. This result demonstrates that graphene has great potential for offering lightweight, low-cost, flexible and environmentally friendly shielding materials which can be extended to offering required shielding from electromagnetic interference (EMI), not only for VCO phase noise optimisation, but also for sensitive electronic devices.

No description available.