Thesis (M.S.)--Rochester Institute of Technology, 2007. / Typescript. Includes bibliographical references (leaves 89-104).

Thesis (doctoral)--Technical University of Delft, 2006 / Includes bibliographical references (p. 173-191) and index.

No description available.

No description available.

No description available.

Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2008. / Committee Chair: Dr. Richard W. Neu; Committee Member: Dr. David L. McDowell; Committee Member: Dr. W. Steven Johnson.

The study addresses the coating selection for a proposed placement of a hydroturbine into the Gulf Stream. The turbine will generate energy in a similar manner to a wind turbine. The effects of biofouling and corrosion in the current project are assessed. A review of different types of traditional paint coatings is given, as well as the option for a copper-nickel alloy. Testing that should be undertaken for the coating selection is described in detail. Coating considerations are offered and discussed. Design considerations and modifications are also offered. / by Andrew Spicer Bak. / Vita. / Thesis (M.S.C.S.)--Florida Atlantic University, 2009. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2009. Mode of access: World Wide Web.

Directionally solidified (DS) nickel-base superalloys are used in high temperature gas turbine engines because of their high yield strength at extreme temperatures and strong low cycle fatigue (LCF) and creep resistance. Costly inspecting, servicing, and replacing of damaged components has precipitated much interest in developing models to better predict service life. Turbine blade life modeling is complicated by the presence of notches, dwells, high temperatures and temperature gradients, and highly anisotropic material behavior. This work seeks to develop approaches for predicting the life of hot sections of gas turbines blade material CM247LC DS subjected to LCF, dwells, and stress concentrations while taking into consideration orientation and notch effects. Experiments were conducted on an axial servo-hydraulic MTS® testing machine. High temperature LCF tests were performed on smooth and notched round-bar specimens in both longitudinal and transverse orientations with and without dwells. Experimental results were used to develop and validate an analytical life prediction model. An analytical model based on a multiaxial Neuber approach predicts the local stress-strain response at a notch and other geometric stress concentrations. This approach captures anisotropy through a multiaxial generalization of the Ramberg-Osgood relation using a Hill's type criterion. The elastic notch response is determined using an anisotropic elastic finite element analysis (FEA) of the notch. The limitations of the simpler analytical life-modeling method are discussed in light of FEA using an anisotropic elastic-crystal viscoplastic material model. This life-modeling method provides a quick alternative to time demanding elastic-plastic FEA allowing engineers more design iterations to improve reliability and service life.

Due to the extreme operating conditions present in the combustion sections of gas turbines, designers have relied heavily on specialized engineering materials. For blades, which must retain substantial strength and resistance to fatigue, creep, and corrosion at high temperatures, directionally-solidified (DS) nickel-base superalloys have been used extensively. Complex thermomechanical loading histories makes life prediction for such components difficult and subjective. Costly product inspection and refurbishment, as well as capital expense required in turbine forced outage situations, are significant drains on the resources of turbine producers. This places a premium on accurate endurance prediction as the foundation of viable long-term service contracts with customers. In working towards that end, this work characterizes the behavior of the blade material CM247LC DS subjected to a variety of in-phase (IP) and out-of phase (OP) loading cycles in the presence of notch stress concentrations. The material response to multiaxial notch effects, highly anisotropic material behavior, time-dependent deformation, and waveform and temperature cycle characteristics is presented. The active damage mechanisms influencing crack initiation are identified through extensive microscopy as a function of these parameters. This study consisted of an experimental phase as well as a numerical modeling phase. The first involved conducting high temperature thermomechanical fatigue (TMF) tests on both smooth and notched round-bar specimens to compile experimental results. Tests were conducted on longitudinal and transverse material grain orientations. Damage is characterized and conclusions drawn in light of fractography and microscopy. The influences of microstructure morphology and environmental effects on crack initiation are discussed. The modeling phase utilized various finite element (FE) simulations. These included an anisotropic-elastic model to capture the purely elastic notch response, and a continuum-based crystal visco-plastic model developed specifically to compute the material response of a DS Ni-base superalloy based on microstructure and orientation dependencies. These FE simulations were performed to predict and validate experimental results, as well as identify the manifestation of damage mechanisms resulting from thermomechanical fatigue. Finally, life predictions using simple and complex analytical modeling methods are discussed for predicting component life at various stages of the design process.