Este trabalho desenvolve a simulação do controle de velocidade de motor de indução com a técnica de controle direto de torque (Direct Torque Control - DTC), sendo executada em um dispositivo lógico programável tipo FPGA (Field Programable Gate Array). A simulação é realizada usando-se dois programas: O MATLAB/Simulink e o ModelSim, sendo que estes dois programas trabalham em modo de co-simulação provida pelo toolbox Link-for-ModelSim do Simulink. Enquanto a dinâmica do motor e do inversor é executada no MATLAB, o algoritmo de controle da estratégia DTC é executada no ModelSim. O algoritmo de acionamento DTC é escrito em linguagem de descrição de hardware VHDL (Very High Speed Integrated Circuit Hardware Description Language - VHSIC HDL) e utiliza a aritmética de ponto flutuante. Os resultados das simulações são apresentados e analisados no final deste trabalho. / This work presents a simulation of induction motor speed control using the technique of direct torque control (DTC), performed in a reprogrammable device type FPGA. The simulation is performed using two programs: MATLAB/Simulink and ModelSim, where these two programs work in a co-simulation mode, provide by Link for ModelSim toolbox from Simulink. While the motor and inverter dynamics is performed in MATLAB, the control algorithm of DTC technique runs in the ModelSim program. The algorithm of DTC drive is written in hardware description language (VHDL) and use the float point arithmetic. The simulation results are presented and analyzed in the end of this work.

In different applications, in digital domain, it is necessary to change the sampling rate by an arbitrary number. For example Software Radio which should handle different conversion factors and standards. This work focuses on the problem of designing and implement sampling rate converters for conversions between arbitrary sampling rates. The report presents an overview of different converter techniques as well as considers a suitable scheme with low implementation cost. The creating VHDL generator of Farrow-based structure to speed up the design process is the main task of this work. The suitable design technique which is the most important thing in any design work is presented in the report as well. The scheme which is considered to be suitable is created by VHDL generator and tested in MATLAB. The source code is attached to the report. And some results from tests of the implemented scheme.

<p>In different applications, in digital domain, it is necessary to change the sampling rate by an arbitrary number. For example Software Radio which should handle different conversion factors and standards. </p><p>This work focuses on the problem of designing and implement sampling rate converters for conversions between arbitrary sampling rates. </p><p>The report presents an overview of different converter techniques as well as considers a suitable scheme with low implementation cost. The creating VHDL generator of Farrow-based structure to speed up the design process is the main task of this work. The suitable design technique which is the most important thing in any design work is presented in the report as well. </p><p>The scheme which is considered to be suitable is created by VHDL generator and tested in MATLAB. The source code is attached to the report. And some results from tests of the implemented scheme.</p>

Este trabalho desenvolve a simulação do controle de velocidade de motor de indução com a técnica de controle direto de torque (Direct Torque Control - DTC), sendo executada em um dispositivo lógico programável tipo FPGA (Field Programable Gate Array). A simulação é realizada usando-se dois programas: O MATLAB/Simulink e o ModelSim, sendo que estes dois programas trabalham em modo de co-simulação provida pelo toolbox Link-for-ModelSim do Simulink. Enquanto a dinâmica do motor e do inversor é executada no MATLAB, o algoritmo de controle da estratégia DTC é executada no ModelSim. O algoritmo de acionamento DTC é escrito em linguagem de descrição de hardware VHDL (Very High Speed Integrated Circuit Hardware Description Language - VHSIC HDL) e utiliza a aritmética de ponto flutuante. Os resultados das simulações são apresentados e analisados no final deste trabalho. / This work presents a simulation of induction motor speed control using the technique of direct torque control (DTC), performed in a reprogrammable device type FPGA. The simulation is performed using two programs: MATLAB/Simulink and ModelSim, where these two programs work in a co-simulation mode, provide by Link for ModelSim toolbox from Simulink. While the motor and inverter dynamics is performed in MATLAB, the control algorithm of DTC technique runs in the ModelSim program. The algorithm of DTC drive is written in hardware description language (VHDL) and use the float point arithmetic. The simulation results are presented and analyzed in the end of this work.