Atualmente, existe uma grande necessidade médica por enxertos vasculares de pequeno calibre (< 6 mm), que possam ser utilizados em cirurgias de reconstrução vascular. Nesse trabalho, dois tipos de biomateriais vasculares foram desenvolvidos pela técnica de electrospinning: biomateriais de policaprolactona (PCL) e biomateriais de poli(carbonato de trimetileno – co – ácido lático) (PTMCLLA). Os biomateriais de PCL foram funcionalizados com heparina e com VEGF (PCL/Hep/VEGF). Os biomateriais de PTMCLLA foram desenvolvidos a partir de três razões de carbonato de trimetileno/ ácido lático: 20/80, 30/70 e 40/60. Os biomateriais de PCL apresentaram taxa de degradação lenta e alta elasticidade. A funcionalização dos biomateriais preveniu a coagulação do sangue e também favoreceu o crescimento de células-tronco mesenquimais (CTMs) e de células progenitoras endoteliais (CPEs) nessas estruturas. A análise de PCR demonstrou que o VEGF adsorvido aos biomateriais não foi suficiente para diferenciar as CTMs em células endoteliais. O cultivo das CPEs sobre os biomateriais aumentou a expressão de VE-caderina e a presença de VEGF nas estruturas manteve o nível de expressão de CD31 e CD34 nessas células. Após essas análises, os biomateriais de PCL/Hep/VEGF foram fabricados em formato tubular. As CPEs foram semeadas no lúmen do biomaterial, através de biorreatores de parede rotatória (BPR), e mantidas em cultivo, por biorreatores de perfusão (BP). O BPR favoreceu a distribuição homogênea das CPEs na parede luminal dos biomateriais enquanto que o BP estimulou seu crescimento e otimizou seu metabolismo energético. Os biomateriais produzidos a partir dos copolímeros de PTMCLLA 30/70 e 40/60 exibiram uma alta flexibilidade. Porém, os biomateriais de PTMCLLA 40/60 tiveram um grande enrugamento. Os biomateriais de PTMCLLA 30/70 suportaram a adesão e o crescimento de CTMs, de CPEs e de células musculares lisas. Os resultados obtidos no presente estudo demonstram que biomateriais de PCL/Hep/VEGF apresentam características físico-químicas compatíveis para o uso vascular. Ainda, previnem a formação de trombos em sua superfície e propiciam o desenvolvimento da camada endotelial em seu lúmen. Os biomateriais de PTMCLLA 30/70 exibem alta flexibilidade e suportam o desenvolvimento de células vasculares e de células-tronco mesenquimais. De acordo com esses resultados, é possível concluir que biomateriais de PCL/Hep/VEGF e de PTMCLLA 30/70 são candidatos promissores para aplicação como enxertos vasculares. / Currently, there is a great medical need for small caliber vascular grafts (<6 mm), which can be used in vascular replacement surgeries. In this work, two types of vascular biomaterials were developed by the electrospinning technique: biomaterials of polycaprolactone (PCL) and biomaterials of poly(trimethylene carbonate-co-L-lactide) (PTMCLLA). PCL biomaterials were functionalized with heparin and VEGF (PCL / Hep/VEGF). The PTMCLLA biomaterials were developed from three ratios of trimethylene carbonate/lactide: 20/80, 30/70 and 40/60. The PCL biomaterials presented a slow degradation rate and high elasticity. The functionalization of the biomaterials prevented the blood from clotting and also favored the growth of mesenchymal stem cells (MSCs) and endothelial progenitor cells (EPCs) in these structures. PCR analysis demonstrated that VEGF adsorbed by the biomaterials was not sufficient to differentiate the MSCs into endothelial cells. The cultivation of CPEs on the biomaterials increased their expression of VE-cadherin and the presence of VEGF in the structures maintained the cell expression of CD34 and CD31. After these analyzes, the PCL/Hep/VEGF biomaterials were produced in a tubular geometrical form. The CPEs were seeded into their lumen by rotating bioreactors (RB) and maintained in culture by perfusion bioreactors (PB). The RB favored the homogeneous distribution of the CPEs in the luminal wall of the biomaterials while the BP stimulated their growth and optimized their energetic metabolism. The biomaterials produced from the PTMCLLA 30/70 and 40/60 copolymers exhibited high flexibility. However, the PTMCLLA 40/60 biomaterials exhibited substantial wrinkling. The PTMCLLA 30/70 biomaterials supported the adhesion and growth of MSCs, CPEs and smooth muscle cells. This study has demonstrated that PCL/Hep/VEGF biomaterials have physicochemical characteristics compatible with vascular use. Furthermore, they prevent thrombus formation on their surfaces and promote the development of the endothelial layer in their lumen. Biomaterials of PTMCLLA 30/70 exhibit high flexibility and support the development of vascular and mesenchymal stem cells. According to these results, it can be concluded that PCL/Hep/VEGF and PTMCLLA 30/70 biomaterials are promising candidates for use as vascular grafts.

Résumé soumis à confidentialité / Not available

Annually, about 80,000 people die in the United Kingdom due to myocardial infarction, congestive heart failure, stroke, or from other diseases related to blood vessels. The current gold standard treatment for replacing the damaged blood vessel is by autograft procedure, during which the internal mammary artery (IMA) graft or saphenous vein graft (SVG) are usually employed. However, some limitations are associated with this type of treatment, such as lack of donor site and post-surgery problems that could negatively affect the patient’s health. Therefore, this present work aims to fabricate a synthetic blood vessel that mimics the natural arteries and to be used as an alternative method for blood vessel replacement. Polymeric materials intended to be used for this purpose must possess several characteristics including: (1) Polymers must be biocompatible; (2) Biodegradable with adequate degradation rate; (3) Must maintain its structural integrity throughout intended use; (4) Must have ideal mechanical properties; and (5) Must encourage and enhance the proliferation of the cells. The feasibility of using synthetic biodegradable polymers such as poly (ε- caprolactone) (PCL) and poly (lactide-co-glycolic acid) (PLGA) for fabricating tubular vascular grafts was extensively investigated in this work. Many fundamental experiments were performed to develop porous tissue- engineered polymeric membranes for vascular graft purposes through electrospinning technique to achieve the main aim. Electrospinning was selected since the scaffolds produced by this method usually resemble structural morphology similar to the extracellular matrix (ECM). Hence, four 6mm in diameter tubular shape vascular grafts PCL only, PLGA only, coaxial (core-PCL and shell-PLGA), and bilayer (inner layer-PCL and outer layer-PLGA) was designed and fabricated successfully. The structure and properties of each scaffold membrane were observed by scanning electron microscopy (SEM), and these scaffolds were fully characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), water contact angle measurements, mechanical tensile test, as well as cell culture studies were carried out by seeding human umbilical vein cells (HUVEC) and human vascular Fibroblast cells (HVF). Moreover, all polymeric grafts underwent degradation process, and the change in their morphological structure properties was studied over 12 weeks at room temperature. All scaffolds were also exposed to a controlled temperature of 37°C for four weeks, in phosphate-buffered saline solution (pH, 7.3). It was found that all scaffolds displayed exceptional fibre structure and excellent degradability with adequate steady weight-loss confirming the suitability of the fabricated scaffolds for tissue engineering applications. The coaxial and bilayer scaffolds degraded at a much slower (and steadier) rate than the singular PCL and PLGA tubular scaffolds. Coaxial grafts fabricated via coaxial needle showed an increase in their fibre diameter and pore size volume than other membranes, but also showed to have significant tensile strength, elongation at fracture, and Young’s modulus. To conclude, all scaffolds have demonstrated to be reliable to adhere and proliferate HUVEC, and HVF cells, but these cells were attracted to the PLGA membrane more than other fabricated membranes.