[pt] O controle das tensões dos diversos barramentos de um sistema elétrico de potência tem como objetivo garantir a qualidade da energia fornecida aos consumidores. As tensões devem respeitar níveis regulamentados pelo governo. Atualmente, no Sistema Elétrico de Potência (SEP) brasileiro, a tarefa do controle de tensão, realizada pelos operadores de tempo real, se baseia nos valores e tendências de diversas variáveis (tensões, potências reativas e ativas, sensibilidade dos equipamentos, dentre outras). Para a formação de um operador nessa tarefa são necessários de um a dois anos, tempo que poderia ser reduzido caso um sistema de apoio à decisão dedicado ao problema de controle de tensão estivesse à disposição durante o treinamento. Entretanto, em virtude do grande número de grandezas a serem analisadas e de suas não linearidades, é necessário uma ferramenta automática de apoio à decisão que seja capaz de tratar intrinsecamente relações não lineares. Deste modo, neste trabalho optou-se por desenvolver um sistema baseado em Redes Neurais Artificiais (RNA) para a confecção do sistema sugerido, com o objetivo de indicar a necessidade de realizar ações de controle de tensão utilizando-se dos recursos ou equipamentos disponíveis. O sistema desenvolvido é composto de três módulos: Pré-processamento; Análise e Classificação do evento; e Pós-processamento. Tal sistema serve para sugerir a manobra de equipamentos mais adequada para o controle de tensão. No estudo de caso, o sistema proposto foi avaliado nos equipamentos de controle de tensão (reatores, capacitores e tapes) constantes no Sistema de Transmissão em 765 kV, responsável pela interligação dos sistemas Sul e Sudeste do Brasil. Utilizando dados obtidos do sistema de aquisição em tempo real, diferentes configurações de RNAs foram testadas. Os melhores resultados foram obtidos com uma estrutura de duas redes neurais por equipamento a ser controlado, apresentando, em média, 80% de acerto em relação às manobras realizadas em tempo real. Em virtude da complexidade do problema, os resultados foram considerados mais do que satisfatórios, indicando a aplicabilidade desta técnica para a realização do sistema desejado. / [en] The main objective of the voltage control in Electrical Power System (EPS) is to guarantee the quality of the energy supplied to consumers. The voltage must respect government regulated levels. Currently, on the Brazilian EPS, the voltage control task is carried out by system operators based on diverse information, such as current values, and trends of electric variables (voltages, reactive and active powers, their sensitivities in the control devices performance, amongst others). To fully train a operator in this task it is necessary one or two years, period that could be greatly reduced if a decision support system was available during the operator`s training. However, due to the great number of variables that must be analyzed and their nonlinearity, an automatic decision support tool, capable to treat nonlinear relations, is necessary. Therefore, this work proposes a system based on Artificial Neural Networks (ANN), with the objective to identify the necessity or not to use the voltage control resources in the EPS. The developed system is composed of three modules: Pre-processing; Event Analysis and Classification; and Post-processing. Such decision support system suggests the most adequate equipment maneuver in the voltage control task. In the case study, the proposed system was evaluated using the available voltage control equipments (reactors, capacitors and transformer taps) in the 765 kV Transmission System, main responsible trunk for the interconnection of South and Southeastern Brazilian systems. Using real time data, different ANN configurations have been tested. The best results were obtained with a structure composed of two neural networks, for each controlled equipment, presenting, in average, 80% accuracy in relation to maneuvers occurred in real time. Due to the problem complexity, the results were considered more than satisfactory, indicating the applicability of this technique for the development of the desired system.

[pt] A falta de recursos e a questão ecológica têm limitado a expansão do sistema de transmissão. Esta realidade, em conjunto com o crescimento da carga, faz com que os sistemas elétricos trabalhem bastante carregados. Esta nova condição pode levar a situações de colapso de tensão. Métodos para avaliação do carregamento da rede de transmissão tornaram-se necessários e imprescindíveis para que se possa entender o funcionamento do sistema nestas condições e possibilitar a sua operação de modo correto. Ferramentas analíticas têm sido usadas para reforço das condições de segurança de tensão do sistema em tempo real, se for avaliado que o sistema não é suficientemente seguro. Ações operativas de controle são determinadas, para mover o estado do sistema para um ponto de operação seguro. Entretanto, ferramentas de avaliação e reforço não são a única necessidade. As mesmas ações de controle, que podem afastar o sistema de uma situação de instabilidade de tensão, também podem ter efeito oposto ao esperado e contribuir para o problema, podendo até mesmo levar o sistema ao colapso. Portanto, é necessário o desenvolvimento de uma ferramenta computacional para avaliar a adequação de ações de controle de tensão. Neste trabalho é proposta uma ferramenta computacional, desenvolvida com base no sistema linearizado das equações de fluxo de carga, incluindo equações de controle de tensão e limites, para a avaliação do efeito das ações de controle de tensão. São obtidos índices que permitem avaliar se a ação de controle é adequada ou não. Além disso, esses índices podem avaliar a interdependência entre os controles, porque além de indicarem o efeito do controle sobre a tensão da barra controlada, podem indicar também o efeito do controle sobre as outras barras de tensão controlada do sistema. Estes índices podem ser obtidos de forma extremamente rápida, e são adequados para uso em tempo-real. / [en] The lack of investments and the ecological matter have limited the expansion of the transmission system. This reality, together with the load growth, makes the electric systems to work heavy loaded. This new condition can lead to situations of voltage collapse. Methods for evaluation the transmission network loading became necessary and indispensable for understanding system performance under these conditions and for making possible secure operation. Analytic tools have been used to evaluate the voltage security of the system in real time. If it is evaluated that the system is not sufficiently secure in relation to voltage, control actions can be determined, in order to move the state of the system for a secure operation point. However, these tools are not the only need. The same control actions that can move away the system from a situation of voltage instability, can also have opposite effect and contribute for worsening the problem, perhaps leading to system collapse. Therefore, it is necessary the development of computational tools to evaluate the adequacy of these control actions. In this work it is proposed a computational tool, based on the linearized set of power flow equations, including equations for voltage control and limits, for the evaluation of the effect voltage control actions. Indexes that allow the evaluation whether the control action is adequate or not are obtained. The indexes can also evaluate the interdependence among the controls, because besides indicating the effect of the control action on the voltage of the controlled bus, they can also indicate the effect on the other voltage controlled buses. The indexes can be calculated in an extremely fast way, and are appropriate for use in real-time operation.

Este trabalho apresenta maneiras de trabalhar com o controle de potência reativa e estabilidade de tensão em microgrids. A estratégia de controle utilizada é o Controle por Tensão Distribuída (Distributed Voltage Control - DVC), ou controle por tensões distribuídas, um laço integral que considera as potências reativas em todas as barras como entradas e as tensões respectivas como sinais de controle. Diferentes estratégias de controle para distribuição de potência foram propostas e analisadas, sempre enfatizando seus aspectos conceituais. O cálculo dos ganhos do controlador, embora fundamental para o sucesso de qualquer estratégia de controle, geralmente não é discutido, e não são dados métodos ou linhas gerais para esta tarefa. Neste trabalho, apresentamos e discutimos diferentes metodologias para o projeto de ganhos de controle em DVC. Além disso, sendo o sistema não-linear, grandes variações de performance podem ser observadas se os mesmos ganhos de controle são usados para todos os pontos de operação, o que motiva a proposta de uma estratégia de programação de ganhos, também apresentada neste trabalho. / This text deals with the control of reactive power distribution and voltage stability in microgrids. The control strategy studied is the Distributed Voltage Control (DVC), an integral loop considering entries as reactive in every bus and the bus voltages as control signals. Different control strategies for power distribution have been proposed and analysed, always emphasising its conceptual aspects; design of the controller’s gains, however fundamental for the success of any control strategy, is usually not discussed, and no methods or guideline are given for this task. In this text we present and discuss different methodologies for tuning the control gains in DVC. Moreover, since power systems are nonlinear, large variations in performance can be observed if the same control gains are used for all operating points, which motivates the proposal of a gain scheduling strategy, also presented in here.

The output power variability of intermittent renewable sources can cause significant fluctuations in distribution system voltages. A local linear controller that exploits the capability of a photovoltaic inverter to provide both real and reactive power is described. This controller substitutes reactive power for real power when fluctuations in the output of the photovoltaic source are experienced. In this way, the inverter can help mitigate distribution system voltage fluctuations. In order to provide real and reactive to the grid, a three-phase grid-connected single-stage photovoltaic system with maximum power point tracking and power control is described. A method of reducing the current harmonic caused by resonance of the LC filter and transformer is presented. The local linear controller is examined using an example distribution system, and it is found that the controller is effective at mitigating voltage violations. The photovoltaic control system is examined using three-phase single-stage PV inverter system. The power control and damping system show good performance and stability under rapid change of irradiance.

Este trabalho apresenta maneiras de trabalhar com o controle de potência reativa e estabilidade de tensão em microgrids. A estratégia de controle utilizada é o Controle por Tensão Distribuída (Distributed Voltage Control - DVC), ou controle por tensões distribuídas, um laço integral que considera as potências reativas em todas as barras como entradas e as tensões respectivas como sinais de controle. Diferentes estratégias de controle para distribuição de potência foram propostas e analisadas, sempre enfatizando seus aspectos conceituais. O cálculo dos ganhos do controlador, embora fundamental para o sucesso de qualquer estratégia de controle, geralmente não é discutido, e não são dados métodos ou linhas gerais para esta tarefa. Neste trabalho, apresentamos e discutimos diferentes metodologias para o projeto de ganhos de controle em DVC. Além disso, sendo o sistema não-linear, grandes variações de performance podem ser observadas se os mesmos ganhos de controle são usados para todos os pontos de operação, o que motiva a proposta de uma estratégia de programação de ganhos, também apresentada neste trabalho. / This text deals with the control of reactive power distribution and voltage stability in microgrids. The control strategy studied is the Distributed Voltage Control (DVC), an integral loop considering entries as reactive in every bus and the bus voltages as control signals. Different control strategies for power distribution have been proposed and analysed, always emphasising its conceptual aspects; design of the controller’s gains, however fundamental for the success of any control strategy, is usually not discussed, and no methods or guideline are given for this task. In this text we present and discuss different methodologies for tuning the control gains in DVC. Moreover, since power systems are nonlinear, large variations in performance can be observed if the same control gains are used for all operating points, which motivates the proposal of a gain scheduling strategy, also presented in here.

Este trabalho apresenta maneiras de trabalhar com o controle de potência reativa e estabilidade de tensão em microgrids. A estratégia de controle utilizada é o Controle por Tensão Distribuída (Distributed Voltage Control - DVC), ou controle por tensões distribuídas, um laço integral que considera as potências reativas em todas as barras como entradas e as tensões respectivas como sinais de controle. Diferentes estratégias de controle para distribuição de potência foram propostas e analisadas, sempre enfatizando seus aspectos conceituais. O cálculo dos ganhos do controlador, embora fundamental para o sucesso de qualquer estratégia de controle, geralmente não é discutido, e não são dados métodos ou linhas gerais para esta tarefa. Neste trabalho, apresentamos e discutimos diferentes metodologias para o projeto de ganhos de controle em DVC. Além disso, sendo o sistema não-linear, grandes variações de performance podem ser observadas se os mesmos ganhos de controle são usados para todos os pontos de operação, o que motiva a proposta de uma estratégia de programação de ganhos, também apresentada neste trabalho. / This text deals with the control of reactive power distribution and voltage stability in microgrids. The control strategy studied is the Distributed Voltage Control (DVC), an integral loop considering entries as reactive in every bus and the bus voltages as control signals. Different control strategies for power distribution have been proposed and analysed, always emphasising its conceptual aspects; design of the controller’s gains, however fundamental for the success of any control strategy, is usually not discussed, and no methods or guideline are given for this task. In this text we present and discuss different methodologies for tuning the control gains in DVC. Moreover, since power systems are nonlinear, large variations in performance can be observed if the same control gains are used for all operating points, which motivates the proposal of a gain scheduling strategy, also presented in here.

This dissertation focuses on daily volt/var control in distribution networks with feeder capacitors, substation capacitors and transformers equipped with on-load tap changers. A hybrid approach is proposed to solve the daily volt/var control problem. To reduce the computational requirements of the problem, this approach combines two methods, namely heuristic and optimal scheduling for the substation and feeder sub-problems respectively. The feeder capacitor dispatch schedule is determined based on a heuristic reactive power setpoint method. At this stage the objective is to minimize the reactive power flow through the substation bus in every time-interval. And as such, mathematical modeling of the distribution network components is adapted to suit time-varying conditions. Furthermore, an optimization model to determine a proper dispatch schedule of the substation devices is formulated. The objective of this model is to minimize the daily total energy loss and voltage deviations. Additionally, the reference voltage of the substation secondary bus and the transformer tap position limits are modified to adapt to given load profiles. The optimization model is solved with a discrete particle swarm optimization algorithm, which incorporates Newton’s method to determine the power-flow solution. The proposed method is applied to a time-varying distribution system and evaluated under different operational scenarios. It is also compared to on-line volt/var control with various settings. Simulation results show that the proposed approach minimizes both the voltage deviations and the total energy loss, while on-line control prioritizes one objective over the other depending on the specified settings. / Dissertation (MEng)--University of Pretoria, 2015. / Electrical, Electronic and Computer Engineering / Unrestricted

Electrical distribution networks face many operational challenges as various renewable distributed generation (DG), such as solar photovoltaic (PV) systems and wind, become part of their structure. Unlike conventional distribution systems, where the only unpredictable aspect is the load level, the intermittent nature of DG poses additional uncertainty levels for distribution system operators (DSO). The voltage quality problem considers the most restrictive issue that hinders high DG integration into distribution grids. Voltage deviates from the nominal grid voltage limits due to the excess power from the DG. DSOs are accustomed to improving the voltage profile by optimal adjustments of the on-load tap changers, voltage regulator taps and capacitor banks. Nevertheless, due to the frequent variability of the output energy from DG, these devices may fail in doing the needful. Battery energy storage systems (BESS) and smart PV inverter functionalities are regarded as promising solutions to promote the seamless integration of renewable resources into distribution networks. BESS are utilized to store the surplus energy during the high penetration of renewable DG that causes high voltage levels and discharge the stored energy when the distribution grid is heavily loaded, which leads to the low voltage levels. Smart PV inverters regulate the network voltage by controlling the reactive power injection or absorption at the inverter end. This dissertation proposes a management strategy that coordinates BESS and smart PV inverter reactive power capability to improve voltage quality in the distribution systems with high PV and wind penetrations. The proposed management method is based on a bi-level optimization algorithm consisting of upper and lower optimization levels. The proposed method determines the optimal location, capacity, numbers and BESS charging and discharging rates to support the distribution system voltage and to ensure optimal deployment of BESS. Case studies are conducted to evaluate the proposed voltage control method. The large size PV system and wind turbine impacts are studied and simulated on the modified IEEE-34 bus test feeder. In addition, the proposed method is applied to the modified IEEE low voltage test feeder to investigate the effectiveness of installing residential rooftop PV systems on the distribution system's voltage. Experimental results show promising outcomes of the proposed method in controlling the distribution networks' voltage. In addition, a day-ahead forecast of PV power output is developed in this dissertation to assist the DSOs to accurately predict the future amounts of PV energy available and reinforcing the decision-making process of batteries operation. Hybrid forecasting models are proposed based on machine learning algorithms, which utilize support vector regression and backpropagation neural network, optimized with three metaheuristic optimization algorithms, namely Social Spider Optimization (SSO), Particle Swarm Optimization (PSO) and Cuckoo Search Optimization (CSO). These algorithms are used to improve the predictive efficacy of the selected algorithms, where the optimal selection of their hyperparameters and architectures plays a significant role in yielding precise forecasting outcomes. / Doctor of Philosophy / The need for more renewable energy has grown significantly, and many countries are embracing these technologies. However, the integration of distributed generation (DG), such as PV systems and wind turbines, poses several operational problems to the distribution system. The voltage problem represents the most significant issue that needs to be addressed. The traditional voltage control equipment may not cope with the rapid fluctuation and may impact their service life. The continuous developments in the battery energy storage systems (BESS) and the smart PV inverter technologies result in increasing the hosting capacity of DG. BESS can store the excess power from the distributed generators and supply this energy to the grid for different operational objectives. On the other hand, the advanced PV inverter's reactive power capability can be exploited from which the grid can attain many benefits. This dissertation aims at providing a reliable control method to the voltage profile in distribution networks embedded with high PV and wind energy by optimal coordination between the operation of the BESS and the smart PV inverter. In addition, the solar forecasting can mitigate the uncertainty associated with PV system generation. In this dissertation, the PV power forecasting application is applied in the distribution system to control the voltage. Through utilizing PV power forecasting, the decision-making for battery operation can be upheld and reinforced. The BESS can store the surplus energy from the PV system as needed and supply it back in low PV power incidents. Experimental results indicate that proper coordination between the BESS and smart PV inverter is beneficial for distribution system operation that can seamlessly integrate PV and wind energy.

Within the past decade, talk has arisen of shifting the utility grid from centralized, radial sources to a distributed network of sources, also known as distributed generation (DG); in the wake of deregulation, the California energy crisis, and northeastern blackouts. Existing control techniques for DG systems are designed to operate a system either in the connected or disconnected (islanding) mode to the utility; thus not allowing for both modes to be implemented and transitioned between. Existing detection and re-closure algorithms can also be improved upon. Dependent upon the method implemented, detection algorithms can either cause distortions in the output or completely miss a disturbance. The present re-closure process to reconnect to the utility is to completely shutdown and wait five minutes. The proposed methods of this study improve upon existing methods, via simulation and hardware experimentation, for DG systems that can intentionally islanding themselves. The proposed, "switched-mode", control allows for continuous operation of the system during disturbances by transitioning the mode of control to reflect the change in the system mode (grid-connected or islanding). This allows for zero downtimes without detrimental transients. The proposed detection method can sense disturbances that other methods cannot; and within 25 ms (approximately 1.5 line-cycles at 60 Hz). This method is an improvement over other methods because it eliminates the need to purposely distort the outputs to sense a disturbance. The proposed re-closure method is an improvement over the existing method due to the fact that it does not require the system to de-energize before re-synchronizing and reconnecting to the utility. This allows for DGs to continuously supply power to the system without having to shut down. Results show that the system is generally ready to reconnect after 2 to 5 line cycles. / Master of Science

Modern power grids are some of the largest and most complex engineered systems. Due to economic competition and deregulation, the power systems are operated closer their security limit. When the system is operating under a heavy loading condition, the unstable voltage condition may cause a cascading outage. The voltage fluctuations are presently being further aggravated by the increasing integration of utility-scale renewable energy sources. In this regards, a fast response and reliable voltage control approach is indispensable. The continuing success of synchrophasor has ushered in new subdomains of power system applications for real-time situational awareness, online decision support, and offline system diagnostics. The primary objective of this dissertation is to develop a data analytic based framework for regional voltage control utilizing high-speed data streams delivered from synchronized phasor measurement units. The dissertation focuses on the following three studies: The first one is centered on the development of decision-tree based voltage security assessment and control. The second one proposes an adaptive decision tree scheme using online ensemble learning to update decision model in real time. A system network partition approach is introduced in the last study. The aim of this approach is to reduce the size of training sample database and the number of control candidates for each regional voltage controller. The methodologies proposed in this dissertation are evaluated based on an open source software framework. / Ph. D. / Modern power grids are some of the largest and most complex engineered systems. When the system is heavily loaded, a small contingency may cause a large system blackout. In this regard, a fast response and reliable control approach is indispensable. Voltage is one of the most important metrics to indicate the system condition. This dissertation develops a cost-effective control method to secure the power system based on the real-time voltage measurements. The proposed method is developed based on an open source framework.