Spelling suggestions: "subject:"water:purification."" "subject:"afterpurification.""
231 |
Formação e remoção de trihalometanos em aguas de abastecimento utilizando permanganato de potassio e carvão ativado em po / Trihalomethane formation and remotion in drinking water using potassium permanganate and powdered activated carbonSantos, Bruno Vicente de Azevedo Pereira dos 27 April 2005 (has links)
Orientador: Ruben Bresaola Junior / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo / Made available in DSpace on 2018-08-11T19:59:18Z (GMT). No. of bitstreams: 1
Santos_BrunoVicentedeAzevedoPereirados_M.pdf: 1399208 bytes, checksum: e6e631ee616dacba62ad54d7e6050502 (MD5)
Previous issue date: 2005 / Resumo: A presente pesquisa teve por objetivo analisar a formação de THM através do uso de permanganato de potássio, de forma isolada ou associada com o cloro livre, no processo de pré-oxidação, e, numa segunda etapa, avaliar a eficiência de remoção destes subprodutos através da adsorção em carvão ativado em pó seguida de tratamento convencional. Foram realizadas oxidações de soluções contendo ácidos húmicos e brometos, em diversas dosagens, analisando-se a formação de THM por espectrofotometria e cromatografia gasosa. A remoção dos subprodutos formados foi realizada com dosagens de CAP variando de 10,0 a 150,0 mg/L e com dosagem de coagulante e valor de pH determinados experimentalmente para cada uma delas. Os resultados obtidos, pelos dois métodos de detecção, mostraram que não houve formação significativa de THM quando a oxidação foi realizada apenas pelo permanganato de potássio e que, com o uso conjunto dos dois oxidantes, houve uma redução média de 30 % na formação quando comparada ao uso exclusivo de cloro livre. O processo de tratamento se mostrou eficiente para as dosagens mais altas de CAP, adequando a qualidade da água final nas normas vigentes. / Abstract: The present research had for objective to analyze the formation of THM through the use of potassium permanganate, isolated or associate with free chlorine, in the process of pre-oxidation, and, in a second stage, to evaluate the removal efficiency of these by-products through the adsorption in powdered activated carbon followed by conventional treatment. The oxidations of solutions contend humic acids and bromides, in diverse dosages had been carried through, analyzing the formation of THM with spectrofotometric and gas chromatography methods. The removal of by-products was carried through with dosages of PAC between 10,0 and 150,00 mg/L and dosages of coagulant and pH value determined experimentally for each one of them. The gotten results, for the two methods of determination, had shown that there wasn't significant formation of THM when the oxidation was carried through only by the potassium permanganate and that, with the joint use of the two oxidants, it had an average reduction of 30 % in the formation when compared with the exclusive use of free chlorine use. The treatment process showed efficient for the highest dosages of PAC, adjusting the quality of the final water in the effective regulations. / Mestrado / Saneamento e Ambiente / Mestre em Engenharia Civil
|
232 |
Evaluation of a small scale water disinfection system using WFMFAlfa, Dorcas Enaji January 2017 (has links)
Submitted in fulfillment of the academic requirement for the degree Master of Engineering in Chemical Engineering, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, South Africa, 2017. / Provision of microbiologically safe drinking water for people living in the rural areas of developing countries remains a major challenge to date. One of the reasons is due to the inability to access potable water mainly because of poor existing water purification systems. Current measures have been put in place to address the challenges of rural water supply. Development of appropriate technologies such as decentralized water treatment supply in the form of point of use (POU) systems are been considered.
In lieu of the above, an appropriate POU system known as the Remote Rural Water Treatment System (RRWTS) was developed at Durban University of Technology (DUT). The RRWTS is polyester based locally sourced Woven Fabric Microfiltration (WFMF) membrane system. The unit is made up of flat sheet modules that are assembled into a pack. It is a robust gravity driven system with the ability to remove suspended solids and colloids in the form of turbidity. The system has high flux of 35 ± 7 LMH and turbidity below 1 NTU, it has the ability to remove pathogens well above 95%. However, this does not comply with WHO and SANS drinking water standards of zero E. coli count/100 ml of treated water. In order to bring the water treated by RRWTS to a satisfactory level for drinking, it is then necessary to add a separate disinfection step like chlorination step to further remove the remaining microbial contaminants.
Thus the main objective of the study was to evaluate the disinfection efficacy of two disinfectants namely waterguard and bromochlor tablet disinfectants and investigate their integration with the WFMF membrane. The study was categorised into three parts. The first part is the addition of disinfectants to unfiltered river water sources for the determination of residual chlorine and the most optimum dose that will yield effective disinfection and also evaluate the extent of E. coli removal by the disinfectants. The second stage was the filtration of four river water sources using the woven fibre membrane (WFM) to determine the efficiency of WFMF. Finally the effect of disinfection kinetics on disinfection was achieved by agitating the water after disinfection and allowing it to stand at different contact times. Performance of the RRWTS was determined by the amount of E. coli and turbidity removed during filtration using WFMF and by chemical disinfectants after filtration.
The results on residual chlorine for different water sources showed that feed quality and disinfectant dose determines the quantity of residual chlorine on all the water sources. The effectiveness of chemical disinfectants in E. coli removal is affected by the quality of water to be disinfected. The study showed that turbidity plays a major role on disinfection by increasing chlorine demand on water sources with high turbidity levels. The WFMF demonstrated excellent filtration performance by producing permeates with turbidity less than 1 NTU for feed turbidities ranging from 10 to 200 NTU. The E. coli removal efficiency by WFMF was very high on all the water sources treated. There was 95-99.8% E. coli removal on raw feeds with influent E. coli ranging between 500 and 44500 CFU/100 ml.
It was seen that major benefits are derived from integrating the WFMF (RRWTS) with chemical disinfection. The benefits includes; better disinfection that meets drinking water set guidelines of zero E. coli and improved quality of water. The need for disinfection kinetics in order to obtain superior disinfection was eliminated. The possibility of disinfection-by-product formation was reduced as smaller quantities of chemical disinfectants were required for complete disinfection on the filtered water. / M
|
233 |
Development and evaluation of woven fabric immersed membrane bioreactor for treatment of domestic waste water for re-useCele, Mxolisi Norman January 2014 (has links)
Submitted in fulfillment of the academic requirements for the Master’s Degree in Technology: Chemical Engineering, Durban University of Technology. Durban. South Africa, 2015. / Increased public concern over health and the environment, the need to expand existing wastewater treatment plants due to population increase, and increasingly stringent discharge requirements, have created a need for new innovative technologies that can generate high quality effluent at affordable cost for primary and secondary re-use. The membrane biological reactor (MBR) process is one of the innovative technologies that warrant consideration as a treatment alternative where high quality effluent and/or footprint limitations are a prime consideration.
MBR processes have been applied for the treatment of industrial effluent for over ten years (Harrhoff, 1990). In this process, ultrafiltration or microfiltration membranes separate the treated water from the mixed liquor, replacing the secondary settling tanks of the conventional activated sludge process. Historically, energy costs associated with pumping the treated water through the membranes have limited widespread application for the treatment of high volumes of municipal wastewater. However, recent advancements and developments in membrane technology have led to reduced process energy costs and induced wider application for municipal wastewater treatment (Stephenson et al., 2000). This report describes a small and pilot scale demonstration study conducted to test a woven fabric microfiltration immersed membrane bioreactor (WFM-IMBR) process for use in domestic wastewater treatment. The study was conducted at Durban Metro Southern Wastewater Treatment Works, Veolia Plant, South Africa.
The main objective of this project was to develop and evaluate the performance of an aerobic woven fabric microfiltration immersed membrane bioreactor (WFM-IMBR) for small scale domestic wastewater treatment. The experiments were oriented towards three sub objectives: to develop the membrane pack for immersed membrane bioreactor based on WF microfilters; to evaluate the hydrodynamics of WF membrane pack for bioreactor applications; and to evaluate the long-term performance and stability of WFM-IMBR in domestic waste water treatment.
The literature was reviewed on membrane pack design for established commercial IMBR. The data collected from literature was then screened and used to design the WF membrane pack. Critical flux was used as the instrument to measure the WF membrane pack hydrodynamics. Long-term operation of the WFM-IMBR was in two folds: evaluating the performance and long term stability of WFM-IMBR.
The membrane pack of 20 flat sheet rectangular modules (0.56 m by 0.355 m) was developed with the gap of 5 mm between the modules. The effects of parameters such as mixed liquor suspended solids or aeration on critical flux were examined. It was observed that the critical flux decreased with the increase of sludge concentration and it could be enhanced by improving the aeration intensity as expected and in agreement with the literature. Hence the operating point for long term subcritical operation was selected to be at a critical flux of 30 LMH and 7.5 L/min/module of aeration.
Prior to the long term subcritical flux of WFM-IMBR, the operating point was chosen based on the hydrodynamic study of the WF membrane pack. The pilot scale WFM-IMBR demonstrated over a period of 30 days that it can operate for a prolonged period without a need for cleaning. Under subcritical operation, it was observed that there was no rise in TMP over the entire period of experimentation. Theoretically this was expected but it was never investigated before. Good permeate quality was achieved with 95% COD removal and 100% MLSS removal. The permeate turbidity was found to be less than 1 NTU and it decreased with an increase in time and eventually stabilized over a prolonged time.
Woven fibre membranes have demonstrated great potential in wastewater treatment resulting in excellent COD and MLSS removal; low permeate turbidity and long term stability operation. From the literature surveyed, this is the first study which investigated the use of WF membranes in IMBRs. The study found that the small scale WFM-IMBR unit can be employed in fifty equivalence person and generate effluent that is free of suspended solids, having high levels of solid rejection and has acceptable discharge COD for recycle.
Future work should be conducted on energy reduction strategies that can be implemented in WFM-IMBR for wastewater treatment since high energy requirements have been reported by commercial IMBRs.
|
234 |
Novel surface modifications and materials for fouling resistant water purification membranesMcCloskey, Bryan David 27 May 2010 (has links)
A major challenge facing widespread implementation of membrane-based water purification is fouling, which results in increased operating costs and reduced membrane lifetime. This thesis focuses on various methods, including novel membrane surface modifications and polymers that resist degradation when exposed to oxidizing agents used as disinfectants, to alleviate membrane fouling. Fouling-resistant ultrafiltration membrane coatings were prepared from poly(ethylene glycol) diglycidyl ether-crosslinked chitosan (chi-PEG hybrid). Composite membranes were prepared for oil-water emulsion filtration by coating the most promising chi-PEG hybrid onto a polysulfone ultrafiltration membrane. Optimization of the coating layer thickness led to composite membranes that exhibited water flux values more than 5 times higher than that of uncoated membranes after one day of oily-water crossflow filtration. The organic rejection of the coated membranes was also higher than that of the uncoated polysulfone membranes. Polydopamine (PDOPA) deposition was discovered to reduce fouling in water purification membranes. PDOPA was found to deposit from solution onto virtually any surface. When deposited on water purification membranes, PDOPA rendered the membrane more hydrophilic and less susceptible to fouling. Moreover, covalent binding of other molecules, such as amine-terminated poly (ethylene glycol) (PEG), to PDOPA is simple and performed using benign chemicals and conditions. Commercially-available polymeric membranes were modified with polydopamine, and all showed improved fouling resistance while filtering oil-water emulsions. To demonstrate the versatility and ease of PDOPA modification scalability, PDOPA was deposited on entire membrane modules, and the resulting modified module exhibited improved fouling resistance. Finally, high ion rejection, chlorine-tolerant sulfonated polysulfone thin-film composite membranes were prepared and characterized. Interestingly, freestanding thick sulfonated poly(arylene ether sulfone) (BPS) films exhibit nearly neutral electrostatic charge, even though sulfonation introduces fixed negative charge into the polymer structure. As a result, charge exclusion ion partitioning is not a dominant rejection mechanism in these films. However, composite membranes prepared from a BPS coating layer and a porous Udel polysulfone support exhibit a negatively charged surface and, presumably, charge exclusion would be a more important partitioning mechanism for these membranes. Therefore, thick BPS films do not exhibit certain drawbacks, such as reduced salt rejection of mixed-valence feeds, that are observed in BPS thin-film composite membranes. / text
|
235 |
THE CHARACTERIZATION OF VIRUS INTERACTION WITH SELECTED SURFACE CONTACT DISINFECTANTS.THURMAN, ROBERT BRUCE. January 1987 (has links)
The search for alternative water disinfectants to those commonly used, such as chlorine, probably began when the disadvantages of those disinfectants became known. Soluble disinfectants have short half-lives and need to be replenished periodically which requires monitoring the determination of appropriate concentrations for waters being treated. This disadvantage may be balanced by the ability to alter dose concentrations of soluble disinfectants to meet changes in demands. Maintenance of a residual disinfectant concentration which can act throughout a water distribution system is another advantage of soluble disinfectants. Disadvantages due to reaction of organic materials include the loss of disinfecting capability, health hazards related to the disinfectant and the potential loss of aesthetic water qualities such as taste, smell and color. The purpose of this study was to investigate different surface contact disinfectants which, while having an inflexible dose concentration capability and releasing no residual disinfectant concentration, do not require monitoring and do not significantly leach into the waters they contact. Powdered aluminum when mixed with a loamy sand reduces virus concentration 3-4 orders of magnitude better than controls while not significantly altering the pH or aluminum concentration of waters that pass through the soil columns. Labeled poliovirus 1 was found to adsorb onto the aluminum surface in batch experiments and undergo degradation or dissociation of the capsid proteins with release of viral fragments and clumps within 76 hours. Freon dispersion of the viral clumps showed the clumps to be non-infective. Polyacrylamide gel electrophoresis of poliovirus 1 incubated with aluminum for 76 hours suggested degradation or dissociation of viral capsid proteins 1, 2 and 3. Magnesium peroxide and magnesium oxide, while effectively inactivating viruses, significantly increase the pH of water which they contact. Polyhalex resin and I5 resin reduce virus concentration, but release functional groups into the surrrounding water. Contact disinfectants such as aluminum, may find point-of-use application for drinking water, use in septic tank leachfields or sewage treatment infiltration basins to reduce the threat of spreading potential disease-causing organisms.
|
236 |
Virus removal during conventional drinking water treatmentRose, Joan Bray. January 1985 (has links)
The isolation of viruses from treated drinking water has raised concerns that water treatment methods may not always adequately insure the removal of viruses from water designated for human consumption. The isolation of enteroviruses and rotavIruses from treated drinking water in a distribution system and at a water treatment plant has been previously reported. Isolation of viruses from drinking water that met recommended levels of coliform bacteria, chlorine and turbidity. The question is raised as to whether or not current drinking water standards ensure safe drinking water. The isolation of enteroviruses and rotaviruses from treated drinking water In a distribution system and at a water treatment plant. This study reports the results of a more extensive investigation on the removal of naturally occurring viruses by water treatment processes including prechlorination/clarification, filtration, and chlorination at a fullscale water treatment plant. The removal of enteroviruses and rotaviruses was studied at a full scale 205 mgd water treatment plant involving chemical clarification, sand filtration and chlorination. Enteric viruses, as well as coliphages, indicator bacteria, physical and chemical variables were measured in water samples taken at each stage of the drinking water treatment facility. Linear intercorrel ations were analyzed for all the variables. The numbers of standard plate count bacteria and coliphage were positively correlated to the presence of enteroviruses in the raw water while coliphage counts were positively correlated to the presence of rotaviruses in the finished water. Samples were taken during the dry and rainy seasons. During the dry season, it was found that reduction of enteroviruses and rotaviruses averaged 81% and 93%, respectively, for the complete treatment process and were the least efficiently removed as compared to the other microorganisms. The greatest reduction of enterovIruses occurred during pre-chlorination/flocculation and filtration, while a significant reduction of rotav I ru ses occurred during prechlorination/ flocculation and final chlorination. Enteroviruses or rotaviruses occurred in 24% of the finished water samples containing chlorine levels of >0.2 mg/L, and meeting coliform bacteria (1/100 ml) and turbidity (1 NTU) standards. During the rainy season removals were found to be far less efficient for all the variables and rotaviruses were isolated from all finished water samples. The results of this study indicate that finished water having measurable levels of free residual chlorine and meeting standards for col iform bacteria, and turbidity cannot be assumed to be virus free.
|
237 |
Investigation of turbidity and chlorine disinfection in South African waters.19 October 2010 (has links)
All natural waters containing particulate matter, such as clay, silt, colloidal particles, plankton / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2007
|
238 |
Studies on ozone initiated inactivation of pathogenic bacteria in aqueous systemsJanuary 2008 (has links)
The effect of ozone on the inactivation of two Gram-negative strains (Escherichia coli
and Pseudomonas aeruginosa) and one Gram-positive endospore (Bacillus subtilis)
bacteria, often present in water and the cause of some waterborne diseases was
investigated as a function of ozone concentration and ozonation duration. Ozone was
generated in situ using corona discharge methods where the ozone concentration ranged
from 0.906 - 4.724 mg/L and the inactivation of the three microbes followed pseudo-first
order kinetics with respect to the microbes. Three microbes were cultured and the
influence of temperature and pH of the aqueous systems on the ozone initiated
inactivation rate of the three microbes was also investigated. This study reports that
molecular ozone is more effective than hydroxyl radicals initiated by the ozone chain
reactions. Two suggested mechanisms for the antimicrobial effectiveness of ozone in
water systems from the literature is discussed. The study also found that ozonation
significantly decreased the Biological Oxygen Demand (BOD) value of natural water. / Thesis (M.Sc.)-University of KwaZulu-Natal, 2008.
|
239 |
Influence of the degree of waste pre-treatment on carbon emissions' production and nature.Asah, Miranda Kahndi. January 2007 (has links)
This study was carried out to gain knowledge of the degradation processes in an
anaerobic environment of pre-treated waste for different degrees of pre-treatment and the
evolution of waste pre-treatment by forced aeration. Pre-sorted MSW (MSW) was pretreated
by composting for 16 weeks in a laboratory scale using forced aeration. Oxygen
concentrations were maintained at 15-18% of oxygen in air for the first 8 weeks and 10-15
% for the later 8 weeks. The ambient temperature was kept constantly between of 20-35
QC. Representative samples of waste from the reactor were collected every fortnight
wherein analysis and full characterisation on the solid matter (C/N ratio, TS and VS, R17,
Biogas) and on the eluate (BOO, COD, TOC, TKN, Conductivity, pH, NOx and NH3)) were
conducted.
The process showed a sharp increase in temperature in the first 6 weeks, ranging from 30-
70 QC indicating a period of high biological activity, a decrease from day 30 to day 50 from
70 to 30 QC and a consistent decrease throughout the later days of the process from 35-25
QC. The sharp increase in temperature signifies a period of maximum biological activity,
where readily biodegradable material decomposes as well as some of the resistant
materials pointing out the success and efficiency of the forced aeration process. For the
first 25 days in an anaerobic environment, waste pre-treated for four weeks was the most
active, indicated by a large volume of gas produced. For the MSW pre-treated for 8, 10, 12
and 16 the volume of gas produced remained basically similar throughout the length of the
experiments. CH4 production in an anaerobic reactor shows an increasing trend for all
degrees of stabilisation up to 6 weeks, after that the gas production and quality deceases
and is comparable to the remaining degrees of treatment.
A gradual decrease in concentration of key parameters (organics) analogous to the
European limit in Europa (1998), were observed after 5 weeks pre-treatment. The study
highlighted that the highest efficiency of pre-treatment is achieved in 6 to 8 weeks and,
therefore it is not recommended to prolong the treatment any further. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2007.
|
240 |
An Investigation of Naturally Occurring Tastes and Odors from Fresh WatersPipes, Wesley O'Feral, Jr. 05 1900 (has links)
The Problem of the cause and control of tastes and odors in water supplies has been the subject of a great many investigations during the last half-century; however, many questions in this field remain to be answered. Theories relating to the cause of tastes and odors occurring in water are still rather numerous and, at present, only a few of them are compatible. Although several procedures have been employed for the eradication of tastes and odors from water supplies, none of them are completely successful.
|
Page generated in 0.1465 seconds