Spelling suggestions: "subject:"materialkorrosion"" "subject:"armeringskorrosion""
1 |
Impact of blending source waters on release of iron corrosion products in potable water distribution systemMehta, Avinash 01 July 2003 (has links)
No description available.
|
2 |
A comparative study of trenchless technologies versus traditional open trenching for the replacement of ageing potable water pipelinesHay, Shanley 13 June 2014 (has links)
Submitted in fulfillment of the requirements of the Degree of Magister Technologiae: Civil Engineering, Durban University of Technology, 2013. / The urgent need to rehabilitate or replace ageing deteriorated buried potable water pipeline networks is one of the many critical service utility provision challenges faced within the municipalities in South Africa. The majority of these unreliable deteriorated pipeline networks consist of un-dipped (not coated with bitumen) AC piping which have long passed their planned economic and technical lifespan. Traditionally, the open trenching method has been utilised for the replacement of aged and deteriorated piping. However, this traditional open trenching method has shown to be expensive and difficult to implement, particularly in congested high traffic use urban areas.
The need to rehabilitate or replace the ageing deteriorated buried potable water pipelines in South Africa, taking into account the above mentioned expensive factors has a solution. This solution is termed ‘trenchless technology’ and sometimes also termed ‘no dig’. Recent advancements in trenchless technologies now include innovative methods such as pipe bursting, close-fit lining and sliplining. Close-fit compact pipe manufactured by Wavin Overseas B.V. was newly introduced in South Africa in 2010 for the rehabilitation of deteriorated pipelines. These trenchless methods require further research into their technical application merits, drawbacks and costs in relation to the traditional open trenching method in order to determine which method is more expensive and also least suitable.
Traditionally, the ‘total cost’ associated with pipe rehabilitation or replacement projects consisted only of the direct costs. The indirect and socio-economic inconvenience costs were often ignored and resulted in costly expenses to the municipalities. However, this research will show that these indirect and socio-economic inconvenience costs must form part of the total cost of a project as it assists with the successful completion of the project without expensive unforeseen costs to the municipalities. In addition, this research will provide insight as to which indirect and socio-economic inconveniences are dominantly experienced by the public. To achieve this, a quantitative socio-economic survey questionnaire was developed. This questionnaire was aimed at residents and business owners who were affected during a project of this nature.
This research study will serve as a support tool to municipalities of South Africa when selecting a pipe rehabilitation or replacement method. This support tool will provide key technical merits and drawbacks of the traditional open trenching method, pipe bursting method, close-fit compact pipe method and sliplining method. In addition, this research study will compare the ‘total cost’ of the traditional open trenching method against the trenchless pipe bursting method.
The decision making process lies in the hands of the municipal technical managers. Therefore, their knowledge and experience of up to date information on trenchless methods (as well as the traditional open trenching method) is vitally important. This research provides insight as to the knowledge and experience of technical municipal staff on trenchless methods, its application and use in South Africa. A quantitative survey questionnaire was developed by the researcher. This questionnaire was aimed at technical staff in the water departments of district and local municipalities of South Africa.
The results of the above questionnaire surveys formed part of the eThekwini Water and Sanitation (EWS) Feasibility study funded by the Dutch Government.
When comparing the costs of the trenchless pipe bursting method against the traditional open trenching method, the results revealed that trenchless methods are undoubtedly cheaper and far less disruptive to the public.
The results of the socio-economic survey revealed that trenchless methods were preferred by the public since it was less disturbing and the hindrances experienced were also far less than the traditional open trenching method.
The results of the technical municipal survey questionnaire revealed that at least 50% of municipal technical staff of South Africa are not adequately informed about trenchless methods, its application and technical merits and drawbacks respectively. This survey questionnaire revealed that South Africa may be advancing over the years on the use of trenchless methods, however, more educating in the form of training, seminars and other methods of marketing must be undertaken starting at a municipal level.
|
3 |
Effect of source water blending on iron and lead release : thermodynamic and statistical modelingTang, Zhijian 01 October 2003 (has links)
No description available.
|
4 |
Effect of water quality on red water release in iron drinking water distribution systemsImran, Syed Abdul Vakell 01 October 2003 (has links)
No description available.
|
5 |
A novel model for the prediction of iron release in drinking water distribution pipe networksMutoti, Ginasiyo 01 October 2003 (has links)
No description available.
|
6 |
Flow Accelerated Corrosion Experience at Comanche Peak Steam Electric StationNakka, Ravi Kumar 05 1900 (has links)
Flow accelerated corrosion (FAC) is a major concern in the power industry as it causes thinning of the pipes by the dissolution of the passive oxide layer formed on the pipe surface. Present research deals with comparing the protection offered by the magnetite (Fe3O4) versus maghemite (γ-Fe2O3) phases thickness loss measurements. Fourier transform infrared spectroscopy (FTIR) is used in distinguishing these two elusive phases of iron oxides. Representative pipes are collected from high pressure steam extraction line of the secondary cycle of unit 2 of Comanche Peak Steam Electric Station (CPSES). Environmental scanning electron microscopy (ESEM) is used for morphological analysis. FTIR and X-ray diffraction (XRD) are used for phase analysis. Morphological analysis showed the presence of porous oxide surfaces with octahedral crystals, scallops and "chimney" like vents. FTIR revealed the predominance of maghemite at the most of the pipe sections. Results of thickness measurements indicate severe thickness loss at the bend areas (extrados) of the pipes.
|
Page generated in 0.0792 seconds