Submitted in fulfilment of the requirements of the D.Tech.: Electrical Engineering, Durban University of Technology, 2017. / The tremendous growth in the volume of telecommunication traffic has undoubtedly triggered an unprecedented information revolution. The emergence of high-speed and bandwidth-hungry applications and services such as high-definition television (HDTV), the internet and online interactive media has forced the telecommunication industry to come up with ingenious and innovative ideas to match the challenges. With the coming of age of purposeful advances in Wavelength Division Multiplexing (WDM) technology, it is inherently practicany possible to deploy ultra-high speed all-optical networks to meet the ever-increasing demand for modern telecommunication services. All-optical networks are capable of transmitting data signals entirely in the optical domain from source to destination, and thus eliminate the incorporation of the often bulky and high-energy consuming optical­ to-electrical-to-optical (OEO) converters at intermediate nodes. Predictably, all-optical networks consume appreciably low energy as compared to their opaque and translucent counterparts. This low energy consumption results in lower carbon footprint of these networks, and thus a significant reduction in the greenhouse gases (GHGs) emission. In addition, transparent optical networks bring along other additional and favourable rewards such as high bit-rates and overall protocol transparency. Bearing in mind the aforementioned benefits of transparent optical networks, it is vital to point out that there are significant setbacks that accompany these otherwise glamourous rewards. Since OEO conversions are eliminated at intermediate nodes in all-optical networks, the quality of the transmitted signal from source to destination may be severely degraded mainly due to the cumulative effect of physical-layer impairments induced by the passage through the optical fibres and associated network components. It is therefore essential to come up with routing schemes that effectively take into consideration the signal degrading effects of physical -layer impairments so as to safeguard the integrity and health of transmitted signals, and eventually lower blocking probabilities. Furthermore, innovative approaches need to be put in place so as to strike a delicate balance between reduced energy consumption in transparent networks and the quality of transmitted signals. In addition, the incorporation of renewable energy sources in the powering of network devices appears to gain prominence in the design and operation of the next-generation optical networks. The work presented in this dissertation broadly focuses on physical-layer impairment aware routing and wavelength assignment algorithms (PLIA-RWA) that attempt to: (i) achieve a sufficiently high quality of transmission by lowering the blocking probability, and (ii) reduce the energy consumption in the optical networks. Our key contributions of this study may be summarized as follows: Design and development of a Q-factor estimation tool. Formulation, evaluation and validation of a QoT-based analytical model that computes blocking probabilities. Proposal and development of IA-RWA algorithms and comparison with established ones. Design and development of energy-efficient RWA schemes for dynamic optical networks. / D

No description available.

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This paper describes the design, configuration, testing, and performance of a Fiber Optic Link used to transmit the signals from a remotely located S-band telemetry system to the main facility at the Kwajalein Missile Range (KMR). This fiber optic system demonstrates for the first time the feasibility of linking RF data from multiple antennas via a single fiber and over a nearly 100-km distance. Measured data of key link parameters such as gain, bit-error-rate, crosstalk, phase and gain stability, dynamic range, and noise figure are presented.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / An advanced electro-optic hybrid rotary joint (EOHRJ) has been developed in Phase II of an AF SBIR effort with Physical Optics Corporation (POC) to replace cable wrap structure for multi-channel rotation-to-fixed (RTF) signal transmission. The EOHRJ meets AFFTC and other range special needs with a generic, high performance, rotary joint solution. At the moment, we have successfully installed and tested the EOHRJ on our KTM tracker system with the following capabilities: 1) able to accommodate hundreds of transmission channels, including electrical power, control, feedback, and low-speed signals; 2) able to accommodate multiple channel, high data rate (over gigabits per second), and bi-directional signal transmission; 3) able to be reliable for harsh environmental operation, adaptive to stringent sized requirement, and accommodating existing electrical and mechanical interfaces. The completed EOHRJ contains three uniquely integrated functional rings. The first and the outmost one is power ring, which provides RTF transmission channels for over 50 high voltage and high current channels. The second and the middle one is low speed electrical signal ring, which provides RTF transmission for over hundred control, feedback, and low speed data signals. The third and the inmost one is optical fiber slip ring, which, incorporating with current advanced signal multiplexing technologies (either time division or wavelength division multiplexing ) is able to provide multiple channel, high data rate, and bi-directional signal transmission. At the moment, the prototype module of the tree-layer EOHRJ has been successfully assembled in Air Force’s tracker system, and is providing a satisfactory performance. This paper presents our joint work on this project.

published_or_final_version / Electrical and Electronic Engineering / Master / Master of Philosophy

Centralized light source (CLS) at the central office is an attractive solution for low-cost implementation of WDM-PON, as it eliminates the need of wavelength-specific transmitters and wavelength management at the optical network units (ONU). CLS can be realized by either a carrier-distributed scheme or a remodulation scheme. In both schemes, however, the upstream signal is susceptible to the interferometric crosstalk induced by the beating between the upstream signal and the back-reflected light due to the intrinsic Rayleigh Backscattering (RB), both of which are of the same wavelength. We propose and demonstrate a simple and novel scheme to suppress the RB noise in the carrier-distributed WDM-PON. Differential phase-shift keying (DPSK) is used as the upstream modulation format and the destructive port of the delay-interferometer (DI) is employed to demodulate the upstream DPSK signal. As the spectrum of RB towards the OLT is narrow due to the very narrow spectrum of the distributed carrier, the RB noise can be considerably rejected by the notch filter-like destructive port of the DI at the OLT, which is used simultaneously to demodulate the upstream DPSK signal. The scheme can also be extended to the application in the remodulation-based WDM-PON, as long as the downstream signal has a narrow spectrum (i.e. via reducing downstream modulation depth). A unique feature of the DPSK signal with reduced modulation depth (RMD-DPSK) is that it can be demodulated by DI's destructive port without extinction ratio (ER) degradation, whereas the demodulated signal from DI's destructive port has a very low ER and can be used as the source for upstream remodulation. We also proposed a novel offset-Manchester coding to suppress Rayleigh noise in electrical domain via a postdetection high-pass filter. / Foreseeing the rapidly growing demand for multimedia services and the trend of service convergence, the penetration of optical fiber in access network is an ultimate solution to break the last-mile bottleneck imposed by the 100-year-old copper network. One of the most promising solutions to realize optical access is the passive optical network (PON), in which the network infrastructure is shared by many subscribers and has no active elements between the central office and the customer. Thus a PON requires neither electrical power nor active management, leading to effective reduction in operational expenses. Time-division-multiplexed passive optical networks (TDM-PONs) such as Ethernet PON (EPON) and Gigabit PON (GPON) are being widely deployed in current fiber-based access networks for providing broadband access, offering triple-play services including video, data and voice. In the near future, wavelength-division-multiplexed passive optical network (WDM-PON) can be the enabler of the next-generation optical broadband access that requires large dedicated and symmetric bandwidth, data privacy, and upgrade flexibility. TDM-PONs also can benefit from WDM technologies for capacity upgrade. / With more diverse multimedia and data services available for broadband access, the access network has to be flexible enough to cope with various data or video delivery such as broadcast/multicast services, in addition to the point-to-point traffic. Multicast is more attractive, compared to broadcast, as it allows selective control of the connection for each subscriber individually. Multicast can be easily realized in TDM-PONs as it employs power-splitting at the remote node (RN). However, it is more challenging in WDM-PONs, due to the dedicated connection between the optical line terminal (OLT) and each ONU. Many studies have been carried out to solve this problem. The prior schemes either need relatively complicated multicast control and/or cannot support future proof 10-Gb/s symmetric point-to-point (PtP) transmission. We proposed a novel multicast control scheme for a WDM-PON with 10-Gb/s symmetric bit rate. The multicast data encoded in DPSK format is superimposed onto all PtP channels modulated in inverse return-to-zero format. With an athermal Dr being used at the ONU to demodulate the DPSK signal, the multicast data can be effectively disabled by slight detuning the laser wavelength at OLT, which has negligible effect on the PtP data. The proposed scheme differs from all the previous schemes in that, the multicast control is realized via the inherent wavelength management of WDM systems, rather than via any other additional adjustment such as ER, synchronization, and polarization. v / Xu, Jing. / Adviser: Lian-Kuan Chen. / Source: Dissertation Abstracts International, Volume: 73-06, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2011. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese.

Nowadays, broadband applications, such as interactive video and multimedia services, have further increased the demand of bandwidth, and thus make high speed multi-wavelength optical access network highly desirable. Wavelength division multiplexing passive optical network (WDM-PON) is a promising candidate to realize the next generation optical access networks due to its dedicated bandwidth for each subscriber and more flexible bandwidth management. As the network traffic is becoming more data-centric, more networking capabilities are required to provide the data service in a more flexible and reliable way. In this thesis, we have proposed and investigated several interesting optical multicast overlay schemes and network protection architectures for WDM-PONs. Optical multicast overlay technique can support the additional multicast transmission on the existing point-to-point data services, while network protection architectures can assure network availability with short traffic restoration time. We will briefly discuss our work in the following sub-topics. / Optical multicast overlay in WDM-PON: Traditional WDM-PONs support only two-way point-to-point data transmission between the optical line terminal (OLT) and the individual subscribers, via the respective designated set of wavelengths. To enhance the network flexibility, it is more desirable to support various different modes of data or video delivery such as broadcast and multicast, in addition to point-to-point transmissions. In this thesis, we systematically investigate the problems and propose our several feasible schemes to overlay multicast transmission onto the existing point-to-point traffic in a WDM-PON. In the first approach, the control of the multicast transmission is achieved by a simple polarization-assisted scheme at the OLT. By the cross-use of wavelengths, a separate path is provided for the multicast differential phase shift keying (DPSK) data from downstream point-to-point amplitude shift keying (ASK) data without additional light sources, which guarantees the transmission performances in both directions, since the upstream ASK signal is imposed on the multicast DPSK signal. We have also demonstrated its variant, in which an optical switch replaces the polarization-assisted control for multicast transmission. The second approach is based on the optical carrier suppression (OCS) technique at the OLT so as to generate the optical subcarriers or sidebands for multicast ASK data modulation. The downstream unicast data is modulated in DPSK format, which will be re-modulated with the upstream ASK data at the respective optical network unit (ONU). As the downstream unicast signal and the upstream signal are calTied on different fiber feeders, while the upstream signal and the multicast signal are carried on different subcarriers, though on the same fiber feeder, the possible Rayleigh backscattering effect is much alleviated. In the third scheme, by using subcarrier modulation technique, we have first successfully overlaid two independent multicast data streams simultaneously onto a WDM-PON, which is believed to further enhance the network capability for multiple destination traffic and improve the cost effectiveness for the future network. Finally, we will provide a comprehensive comparison on all the proposed schemes in this topic. / Survivable network architectures for WDM-PONs: A survivable WDM-PON architecture which can provide self-protection is attractive to avoid enormous loss in data and business due to fiber cuts. To facilitate the network management, the protection switching is realized at the OLT. In this thesis, a simple centrally controlled survivable WDM-PON architecture employing OCS technique is proposed. Protection switching at the OLT employs electrical switches to control the clock signal for the protection sub-carrier generation, via optical carrier suppression. Both distribution and feeder fibers are protected simultaneously. By employing inverse-RZ (IRZ) format for the downstream transmission and non-retum-to-zero (NRZ) for the upstream re-modulated signal, the optical network units are kept colorless and simple. On the other hand, wavelength division multiplexing/time division multiplexing (WDM/TDM) hybrid network, which combines TDM technology and WDM technology, can further increase the network reach, transmission capacity, and reduces the cost per subscriber. Although the bandwidth per subscriber in a WDM/TDM PON is less than that in a WDM-PON, it is still considered as a smooth migration from TDM-PON to WDM-PON. In this thesis, we have proposed a novel WDM/TDM PON architecture which can provide self-protection using a ring topology to connect the subscribers. Finally, we will provide a comprehensive comparison on all the proposed schemes in this topic. / Qiu, Yang. / Adviser: Chun-Kit Chan. / Source: Dissertation Abstracts International, Volume: 73-06, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2011. / Includes bibliographical references (leaves 130-140). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese.

by Lee Chi Man. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2004. / Includes bibliographical references (leaves 63-65). / Abstracts in English and Chinese. / Chapter CHAPTER 1 --- INTRODUCTION --- p.5 / Chapter 1.1 --- Background --- p.5 / Chapter 1.1.1 --- Backbone network - Long haul mesh network problem --- p.5 / Chapter 1.1.2 --- Access network ´ؤ Last mile problems --- p.8 / Chapter 1.1.3 --- Network integration --- p.9 / Chapter 1.2 --- SUMMARY OF INSIGHTS --- p.10 / Chapter 1.3 --- Contribution of this thesis --- p.11 / Chapter 1.4 --- Structure of the thesis --- p.11 / Chapter CHAPTER 2 --- PREVIOUS PROTECTION ARCHITECTURES --- p.12 / Chapter 2.1 --- Introduction --- p.12 / Chapter 2.2 --- Traditional physical protection architectures in metro area --- p.13 / Chapter 2.2.1 --- Self healing ring --- p.17 / Chapter 2.2.2 --- Some terminology in ring protection --- p.13 / Chapter 2.2.3 --- Unidirectional path-switched rings (UPSR) [17] --- p.13 / Chapter 2.2.4 --- Bidirectional line-switched rings (BLSR) [17] --- p.14 / Chapter 2.2.5 --- Ring interconnection and dual homing [17] --- p.16 / Chapter 2.3 --- Traditional physical protection architectures in access networks --- p.17 / Chapter 2.3.1 --- Basic architecture in passive optical networks --- p.17 / Chapter 2.3.2 --- Fault management issue in access networks --- p.18 / Chapter 2.3.3 --- Some protection architectures --- p.18 / Chapter 2.4 --- Recent protection architectures on a ccess networks --- p.21 / Chapter 2.4.1 --- Star-Ring-Bus architecture --- p.21 / Chapter 2.5 --- Concluding remarks --- p.22 / Chapter CHAPTER 3 --- GROUP PROTECTION ARCHITECTURE (GPA) FOR TRAFFIC RESTORATION IN MULTI- WAVELENGTH PASSIVE OPTICAL NETWORKS --- p.23 / Chapter 3.1 --- Background --- p.23 / Chapter 3.2 --- Organization of Chapter 3 --- p.24 / Chapter 3.3 --- Overview of Group Protection Architecture --- p.24 / Chapter 3.3.1 --- Network architecture --- p.24 / Chapter 3.3.2 --- Wavelength assignment --- p.25 / Chapter 3.3.3 --- Normal operation of the scheme --- p.25 / Chapter 3.3.4 --- Protection mechanism --- p.26 / Chapter 3.4 --- Enhanced GPA architecture --- p.27 / Chapter 3.4.1 --- Network architecture --- p.27 / Chapter 3.4.2 --- Wavelength assignment --- p.28 / Chapter 3.4.3 --- Realization of network elements --- p.28 / Chapter 3.4.3.1 --- Optical line terminal (OLT) --- p.28 / Chapter 3.4.3.2 --- Remote node (RN) --- p.29 / Chapter 3.4.3.3 --- Realization of optical network unit (ONU) --- p.30 / Chapter 3.4.4 --- Protection switching and restoration --- p.31 / Chapter 3.4.5 --- Experimental demonstration --- p.31 / Chapter 3.5 --- Conclusion --- p.33 / Chapter CHAPTER 4 --- A NOVEL CONE PROTECTION ARCHITECTURE (CPA) SCHEME FOR WDM PASSIVE OPTICAL ACCESS NETWORKS --- p.35 / Chapter 4.1 --- Introduction --- p.35 / Chapter 4.2 --- Single-side Cone Protection Architecture (SS-CPA) --- p.36 / Chapter 4.2.1 --- Network topology of SS-CPA --- p.36 / Chapter 4.2.2 --- Wavelength assignment of SS-CPA --- p.36 / Chapter 4.2.3 --- Realization of remote node --- p.37 / Chapter 4.2.4 --- Realization of optical network unit --- p.39 / Chapter 4.2.5 --- Two types of failures --- p.40 / Chapter 4.2.6 --- Protection mechanism against failure --- p.40 / Chapter 4.2.6.1 --- Multi-failures of type I failure --- p.40 / Chapter 4.2.6.2 --- Type II failure --- p.40 / Chapter 4.2.7 --- Experimental demonstration --- p.41 / Chapter 4.2.8 --- Power budget --- p.42 / Chapter 4.2.9 --- Protection capability analysis --- p.42 / Chapter 4.2.10 --- Non-fully-connected case and its extensibility for addition --- p.42 / Chapter 4.2.11 --- Scalability --- p.43 / Chapter 4.2.12 --- Summary --- p.43 / Chapter 4.3 --- Comparison between GPA and SS-CPA scheme --- p.43 / Chapter 4.1 --- Resources comparison --- p.43 / Chapter 4.2 --- Protection capability comparison --- p.44 / Chapter 4.4 --- Concluding remarks --- p.45 / Chapter CHAPTER 5 --- MUL 77- WA VELENGTH MUL TICAST NETWORK IN PASSIVE OPTICAL NETWORK --- p.46 / Chapter 5.1 --- Introduction --- p.46 / Chapter 5.2 --- Organization of this chapter --- p.47 / Chapter 5.3 --- Simple Group Multicast Network (SGMN) scheme --- p.47 / Chapter 5.3.1 --- Network design principle --- p.47 / Chapter 5.3.2 --- Wavelength assignment of SGMN --- p.48 / Chapter 5.3.3 --- Realization of remote node --- p.49 / Chapter 5.3.3 --- Realization of optical network unit --- p.50 / Chapter 5.3.4 --- Power budget --- p.51 / Chapter 5.4 --- A mulTI- wa velength a ccess network with reconfigurable multicast …… --- p.51 / Chapter 5.4.1 --- Motivation --- p.51 / Chapter 5.4.2 --- Background --- p.51 / Chapter 5.4.3 --- Network design principle --- p.52 / Chapter 5.4.4 --- Wavelength assignment --- p.52 / Chapter 5.4.5 --- Remote Node design --- p.53 / Chapter 5.4.6 --- Optical network unit design --- p.54 / Chapter 5.4.7 --- Multicast connection pattern --- p.55 / Chapter 5.4.8 --- Multicast group selection in OLT --- p.57 / Chapter 5.4.9 --- Scalability --- p.57 / Chapter 5.4.10 --- Experimental configuration --- p.58 / Chapter 5.4.11 --- Concluding remarks --- p.59 / Chapter CHAPTER 6 --- CONCLUSIONS --- p.60 / LIST OF PUBLICATIONS: --- p.62 / REFERENCES: --- p.63

Besides colorless ONUs, we investigate potentially low cost, high speed vertical-cavity-surface-emitting lasers (VCSELs) for use in future access networks. VCSELs are attractive because they may meet the stringent size, power dissipation and cost constraints of access network components. We carry out experiments to demonstrate that up to 20 Gb/s direct modulation of long wavelength VCSEL is possible and evaluate their performance as high-speed transceivers. / In order to reduce the complexity and costs of ONU transceiver, we propose a scheme based on a nonreciprocal optical modulator and a linear loop mirror for receiving downstream and sending upstream data We show that the nonreciprocity of traveling wave electrodes can selectively impress signal modulation onto the reflected upstream signals only. Monolithic integrated transceivers may thus remodulate downstream signals for upstream data transmission without needing integrated optical circulators. The proposed ONU is thus compatible with monolithic integration. / In this thesis, we describe our research on photonic devices and subsystems for future access networks. Since optical network units (ONUs) are the most cost-sensitive parts, we first investigate the use of advanced modulation format in colorless ONU structure. We implement a scheme which uses dark return-to-zero (DRZ) for downstream transmission and remodulation of it using a differential-phase-shift-keying (DPSK) for upstream both at 10 Gb/s. We also experimentally demonstrate silicon microring based optical frequency discriminators for use in demodulating DPSK and differential-quadrature-phase-shift-keying (DQPSK) signals. We show that the scheme is robust to variations in bit-rates in contrast with conventional Mach-Zehnder delay interferometer scheme. / Internet traffic has undergone tremendous growth in the past decades and has already penetrated into the daily lives of the general population. Demand for new high bandwidth services is beginning to drive the deployment of optical fiber-based access networks to solve the so-called last mile bottleneck around the world. Passive optical networks (PON) are attractive because there are no active components in the transmission line, thus reducing operational and deployment costs. Time-division-multiplexing (TDM) used in currently deployed PON, in which the bandwidth is shared among the users by time domain multiplexing, does not fully utilize the bandwidth potential of optical fibers and will not be able to satisfy the bandwidth demand in access networks in the near future. Among the advanced multiplexing techniques, wavelength-division-multiplexing (WDM) PON is a good candidate technology for providing sustained bit-rates beyond 10 Gb/s in access networks. However, reduction of costs in WDM PON remains a key challenge for their practical deployment. / Wired and wireless hybrid optical access networks are also investigated. Radio-over-fiber is one low-cost approach to deliver broadband wireless services, in which radio signals at the carrier frequency are delivered over optical networks from a central office to remote antenna base stations. Generation of high frequency carrier and radio frequency fading are the main research challenges. We propose and demonstrate frequency upconversion based on frequency doubling and quadrupling. Novel wired and wireless hybrid subsystems that mitigate millimeter-wave signal distortion are also demonstrated. / Xu, Lin. / Adviser: H. K. Tsang. / Source: Dissertation Abstracts International, Volume: 72-04, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2010. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. Ann Arbor, MI : ProQuest Information and Learning Company, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese.

Wong Chi Sang. / "August 2002." / Thesis (Ph.D.)--Chinese University of Hong Kong, 2002. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Mode of access: World Wide Web. / Abstracts in English and Chinese.