Thesis (Ph. D.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2006. / Buck, John, Committee Co-Chair ; Ferguson, Ian, Committee Chair ; Krishnamurthy,Vikram, Committee Member ; Chang, Gee-Kung, Committee Member ; Callen, W. Russell Jr., Committee Member ; Summers, Christopher, Committee Member.

Thesis (Ph. D.)--Ohio State University, 2007. / Title from first page of PDF file. Includes bibliographical references (p. 139-144).

D.Ing. / Optical fibre-based devices (e.g. fibre gratings) play an important role in the optical com- munications and sensing industry. One type of fibre grating, the long-period grating (LPG), is becoming more and more popular as a simple and versatile component for a multitude of applications in optical engineering. The sensitivity of LPGs to various external perturbations and their ability to manipulate selectively light propagating in optical fibres make them well- suited to creating fibre-based devices. LPGs can be used in various applications, for example as gain equalisers for erbium-doped fibre amplifiers, as channel routers in optical add-drop multiplexers and as sensors. LPGs are typically fabricated by exposing photosensitive optical fibre to ultraviolet light. However, a variety of other techniques can be used to fabricate LPGs, including exposure to carbon dioxide (CO2) laser light. Over the years, it has become evident that CO2 laser- induced LPGs exhibit unique properties and features that can be harnessed to develop devices for important applications. It is necessary to understand the physical properties and optical characteristics of CO2 laser-induced LPGs to harness, manipulate and enhance their features. Research has been conducted on the development of an automated fabrication system that produces axially symmetric LPGs in single-mode fibre with a CO2 laser. A detailed study was undertaken on the design of uniform and non-uniform LPGs for wavelength-division multiplexing networks, as well as the characterisation of the CO2 laser beam propagating in the LPG fabrication system. These LPGs have been designed, using either analysis or syn- thesis techniques. The polarisation-dependent loss of the LPGs has also been investigated. Wavelength-selective couplers (WSCs) have been constructed using CO2 laser-induced LPGs and it was shown that these couplers were e®ective but not efficient in routing power to the output port of the tapping fibre. The physical properties, optical transmission characteris- tics, applications and other related issues of CO2 laser-induced LPGs have been investigated and satisfactory experimental results have been obtained. Areas for potential future research concerning CO2 laser-induced LPGs have been identified and discussed.

No description available.

Wavelength division multiplexing passive optical network (WDM-PON) can meet growing bandwidth demand in access network by providing high bandwidth to the end users. Failure in the access network is becoming critical as a large volume of traffic might be affected. Therefore, an effective supervision mechanism to detect and localize the fault is required to shorten the service interruption time. Meanwhile, open access provides a certain freedom for end users to choose the service and hence boosts competition among service/network providers. On the other hand, to offer open access in WDM-PON could result in a substantial change on architectural design, e.g., multiple feeder fibers (FFs) instead of a single one may be required to connect different service/network providers. Consequently, the traditional supervision mechanisms don’t work properly in open WDM-PON. To fill in this gap, several fault supervision mechanisms to support open access in WDMPON are proposed in this thesis. They can be applied to both disjoint and co-located FF layout where the choice of providers is done through wavelength selection. The feasibility of such solutions has been validated by evaluating transmission performance. We have carried out simulations in VPItransmissionMaker for different deployment scenarios. The results have confirmed that no significant degradation of the transmission performance is introduced by the proposed monitoring schemes compared to the benchmark, where no any fault supervision method is implemented.

Un défi majeur dans les réseaux d’aujourd’hui est de combler l’écart entre la haute vitesse de la transmission optique et la vitesse plus limitée du traitement électronique des données. Une option est de commuter les données directement dansle domaine optique. Dans cette thèse, nous proposons plusieurs solutions permettant la commutation dans le domaine optique à une granularité plus fine que la longueur d’onde, technique que nous appelons commutation sous-longueurd’onde. Pour montrer la pertinence des solutions proposées, nous analysons leur performance en termes de capacité de trafic, de débit et de délai. La performance est évaluée à la fois par des simulations et en utilisant des modèles de filesd’attente appropriés. Nous considérons d’abord le cas des réseaux métropolitains (Metropolitan Area Networks, MAN) et nous étudions la performance d’un anneau optique avec multiplexage en longueur d’onde (Wavelength Division Multiplexing, WDM) dans lequel la communication entre les noeuds du réseau se fait par insertion/extraction de données dans des créneaux temporels. Nous présentons un protocole entièrement distribué conçu pour assurer l’équité dansce réseau. Nous proposons également un mécanisme d’assemblage de paquets capable d’assurer des délais faibles ainsi que des taux de remplissage élevés. Nous proposons ensuite des solutions de commutation sous-longueur d’onde qui peuvent être appliquées dans le cas plus général des réseaux asynchrones. D’abord, nous proposons de résoudre le problème des collisions de la commutation optique par rafale (Optical Burst Switching, OBS) par la mise en oeuvre d’un mécanisme de réservation. Afin de maximiser l’utilisation des ressources, nous proposons d’adapter la taille de la rafale optique à la charge du réseau.Ensuite, nous proposons une solution alternative pour construire un réseau coeur tout-optique. A cette architecture, nous associons un protocole d’accès ainsi qu’un algorithme d’allocation dynamique de bande passante et nous analysons les performances de la solution proposée. Par le biais d’une étude de cas, nousmontrons que notre solution est capable de réduire considérablement la consommation énergétique par rapport aux architectures actuelles basées sur des routeurs IP. Enfin, nous proposons un nouveau dispositif optique capable derésoudre la contention directement dans le domaine optique. Nous montrons que ce dispositif simple peut être utilisé pour construire des réseaux optiques dynamiques à courte portée tels que les réseaux d’accès ou les centres de traitement de données. / A key challenge in today’s networks is to bridge the gap between high-speed optical transmission and limited electronic processing. This can be achieved by enabling payload to be switched directly in the optical domain.A simple solutionto provide optical switching is by allocating one wavelength channel to each source-destination pair, a technique called Optical Circuit Switching (OCS). Due to lack of sharing, OCS suffers from limited scalability. To overcome this issue,the capacity of each wavelength channel must be dynamically shared among different source-destination pairs. This requires data to be switched at subwavelength granularity by means of subwavelength switching. In this thesis, wepropose several solutions which enable subwavelength switching in optical networks. To show the relevance of the proposed solutions, we analyse their performance in terms of traffic capacity, flow throughput and packet delay. Performance is evaluated both through simulations and by means of appropriate queueing models. We first consider the case of Metropolitan Area Networks (MAN) and we study the performance of synchronous time-slotted Wavelength DivisionMultiplexing (WDM) ring in which network nodes communicate by inserting and extracting data from time-slots. We present a fully distributedMedia Access Control (MAC) protocol designed to ensure fairness. We also propose a burst assembly mechanism able to ensure low assembly delays and high fill rates of the optical time-slots. We then propose subwavelength switching solutions which can be applied in the more general case of asynchronous wide area networks. We first propose to solve the contention problems of conventional Optical Burst Switching (OBS) and the low utilization issue of wavelength-routed OBS byimplementing a two-way reservation OBS scheme in which the size of the opticalburst increases proportionally with the network load so as to maximize resourceutilization. Next, we propose a solution for building an all-optical wide area network based on multipoint-to-multipoint lightpath sharing. We also design an associated MAC protocol and a dynamic bandwidth allocation algorithm and analyse the performance of the proposed solution. By means of a case study, we show that the proposed solution has the potential to considerably reduce power consumption with respect to current router-based architectures. Finally, we propose a novel optical device able to solve contention directly in the optical domain withoutrequiring any optical buffering, electronic signalling or header processing. We show that thissimple device can be used as a building block for dynamic and power efficient short-range optical networks such as access networks or data centers.

Wavelength division multiplexed (WDM) optical networks are rapidly becoming the technology of choice in next-generation Internet architectures. This dissertation addresses the important issues of improving four aspects of optical networks, namely, routing efficiency, fairness, differentiated quality of service (QoS) and throughput. A new approach for implementing efficient routing and wavelength assignment in WDM networks is proposed and evaluated. In this approach, the state of a multiple-fiber link is represented by a compact bitmap computed as the logical union of the bitmaps of the free wavelengths in the fibers of this link. A modified Dijkstra's shortest path algorithm and a wavelength assignment algorithm are developed using fast logical operations on the bitmap representation. In optical burst switched (OBS) networks, the burst dropping probability increases as the number of hops in the lightpath of the burst increases. Two schemes are proposed and evaluated to alleviate this unfairness. The two schemes have simple logic, and alleviate the beat-down unfairness problem without negatively impacting the overall throughput of the system. Two similar schemes to provide differentiated services in OBS networks are introduced. A new scheme to improve the fairness of OBS networks based on burst preemption is presented. The scheme uses carefully designed constraints to avoid excessive wasted channel reservations, reduce cascaded useless preemptions, and maintain healthy throughput levels. A new scheme to improve the throughput of OBS networks based on burst preemption is presented. An analytical model is developed to compute the throughput of the network for the special case when the network has a ring topology and the preemption weight is based solely on burst size. The analytical model is quite accurate and gives results close to those obtained by simulation. Finally, a preemption-based scheme for the concurrent improvement of throughput and burst fairness in OBS networks is proposed and evaluated. The scheme uses a preemption weight consisting of two terms: the first term is a function of the size of the burst and the second term is the product of the hop count times the length of the lightpath of the burst.

No description available.

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Current ground-based tracking systems at the DoD test and training ranges require transmission of a variety of signals from rotating platform to fixed control and process center. Implementation of commercial off the shelf (COTS) solution for transmitting high-speed, multiple-channel data signals over a rotational platform prompt the development of an advanced electro-optic hybrid rotating-to-fixed information transmission technology. Based on current demand, an Air Force-sponsored Small Business Innovative Research (SBIR) contract has been awarded to Physical Optics Corporation (POC) to modify existing tracking mounts with a unique electro-optic hybrid rotary joint (EOHRJ). The EOHRJ under current development is expected to provide the following features: 1) include a specially designed electrical slip-ring, which is able to accommodate hundreds of transmission channels, including electrical power, control, feedback, and low-speed data signals; 2) include an optical fiber slip-ring which, by incorporating with electrical time division mulitplexing (TDM) and optical wavelength division multiplexing (WDM) technologies, is able to provide multiple channel, high data rate (over gigabits per second), and bi-directional signal transmission; and 3) is designed to be reliable for harsh environmental operation, adaptive to stringent size requirement, and accommodating to existing electrical and mechanical interfaces. Besides the military use, other possible commercial applications include on board monitoring of satellite spinners, surveillance systems, instrumentation and multi spectral vision systems, emergency/medical instruments, remote sensing, and robotics.

Globally increasing levels of bandwidth and capacity requirements force the optical communications industry to produce new products that are faster, more powerful, and more efficient. In particular, optical-electronic-optical (O-E-O) conversions in Wavelength Division Multiplexing (WDM) mechanisms prevent higher data transfer speeds and create a serious bottleneck for optical communications. These O-E-O transitions are mostly encountered in the Wavelength converters of WDMs, and as a result, all-optical wavelength conversion methods have become extremely important. The main discussion in this thesis will concentrate on a specific all-optical wavelength conversion mechanism. In this mechanism, photonic crystal structures are integrated with moving MEMS/NEMS structures to create a state-of-the-art all-optical wavelength converter prototype. A wavelength conversion of 20% is achieved using this structure. Since the interaction of light with moving MEMS/NEMS structures plays an important role in the proposed wavelength conversion mechanism, modeling and simulation of electromagnetic waves becomes a very crucial step in the design process. Consequently, a subsection of this thesis will focus on a proposed enhancement to the finite-difference time-domain (FDTD) to model moving structures more efficiently and more realistically. This technique is named "Linear Dielectric Interpolation" and will be applied to more realistically and efficiently model the proposed photonic crystal MEMS/NEMS wavelength conversion mechanism.