The depletion of fossil fuels and the need to deal with climate change lead to an increasing interest in renewable resources. Lignocellulosic biomass in general, and agricultural residues in particular, could serve as an excellent starting material for the production of cellulose, basic chemicals, lignin and bioethanol in a biorefinery framework as they are abundant, do not compete with food production and are distributed worldwide. Two factors considerably influence the composition and properties of biorefinery products: biomass feedstock and pretreatment process. Their influence on the separability of raw material into a carbohydrate and lignin fraction as well as the composition and properties of these products are objectives of this study. Hereby, the focus is on lignin, as its structure is particularly dependent on the aforementioned factors complicating its further utilisation. Different agricultural biomass namely barley straw, coconut shell powder, hemp shives, horse manure, maize straw, miscanthus, oat husk, pretreated alfalfa, rape straw, sunflower stalks, tomato stalks and wheat straw were investigated regarding their suitability for lignocellulose separation using alkaline soda pulping. Best separation into a carbohydrate and lignin fraction was achieved for pretreated alfalfa, miscanthus, wheat and barley straw. The purity of the obtained lignin fractions varied in the wide range of 57% klason-lignin content for sunflower stalks and 81% for pretreated alfalfa prior to further purification by dialysis. Lignin fractions were characterised by means of FTIR spectroscopy, elementary analysis, thioacidolysis, size-exclusion-chromatography, thermodesorption, differential scanning calorimetry and different wet chemical methods for determination of functional groups. Lignins could be classified into groups, within which they show similar characteristics: (A) horse manure, rape straw, (B) sunflower stalks, tomato stalks, (C) barley-, maize- and wheat straw and (D) hemp shives, miscanthus. In addition, promising lignin candidates were found for several applications. Thus, by screening different agricultural residues, it is possible to choose a specific raw material, in order to produce lignin with desired properties and functionalities. The effect of the pretreatment process was studied based on wheat straw. It was subjected to conventional alkaline pulping, microwave-assisted alkaline pulping and organosolv pulping using formic acid and hydrogen peroxide. Pulping parameters were varied in order to attain best possible separation into a carbohydrate and lignin fraction. Of the varied parameters the concentration of both sodium hydroxide and formic acid has the highest impact on yield and purity of the products for alkaline and organosolv pulping, respectively. It additionally influences the content of functional groups of the lignin fraction and is hence, an important parameter for lignin customisation for subsequent utilisation. Furthermore, the possibility of reducing pulping time by using microwave-assisted pulping instead of conventional alkaline pulping is promising, as the obtained carbohydrate fraction has a low intrinsic viscosity, which may enhance enzymatic hydrolysis.

The depletion of fossil fuels and the need to deal with climate change lead to an increasing interest in renewable resources. Lignocellulosic biomass in general, and agricultural residues in particular, could serve as an excellent starting material for the production of cellulose, basic chemicals, lignin and bioethanol in a biorefinery framework as they are abundant, do not compete with food production and are distributed worldwide. Two factors considerably influence the composition and properties of biorefinery products: biomass feedstock and pretreatment process. Their influence on the separability of raw material into a carbohydrate and lignin fraction as well as the composition and properties of these products are objectives of this study. Hereby, the focus is on lignin, as its structure is particularly dependent on the aforementioned factors complicating its further utilisation. Different agricultural biomass namely barley straw, coconut shell powder, hemp shives, horse manure, maize straw, miscanthus, oat husk, pretreated alfalfa, rape straw, sunflower stalks, tomato stalks and wheat straw were investigated regarding their suitability for lignocellulose separation using alkaline soda pulping. Best separation into a carbohydrate and lignin fraction was achieved for pretreated alfalfa, miscanthus, wheat and barley straw. The purity of the obtained lignin fractions varied in the wide range of 57% klason-lignin content for sunflower stalks and 81% for pretreated alfalfa prior to further purification by dialysis. Lignin fractions were characterised by means of FTIR spectroscopy, elementary analysis, thioacidolysis, size-exclusion-chromatography, thermodesorption, differential scanning calorimetry and different wet chemical methods for determination of functional groups. Lignins could be classified into groups, within which they show similar characteristics: (A) horse manure, rape straw, (B) sunflower stalks, tomato stalks, (C) barley-, maize- and wheat straw and (D) hemp shives, miscanthus. In addition, promising lignin candidates were found for several applications. Thus, by screening different agricultural residues, it is possible to choose a specific raw material, in order to produce lignin with desired properties and functionalities. The effect of the pretreatment process was studied based on wheat straw. It was subjected to conventional alkaline pulping, microwave-assisted alkaline pulping and organosolv pulping using formic acid and hydrogen peroxide. Pulping parameters were varied in order to attain best possible separation into a carbohydrate and lignin fraction. Of the varied parameters the concentration of both sodium hydroxide and formic acid has the highest impact on yield and purity of the products for alkaline and organosolv pulping, respectively. It additionally influences the content of functional groups of the lignin fraction and is hence, an important parameter for lignin customisation for subsequent utilisation. Furthermore, the possibility of reducing pulping time by using microwave-assisted pulping instead of conventional alkaline pulping is promising, as the obtained carbohydrate fraction has a low intrinsic viscosity, which may enhance enzymatic hydrolysis.