Spelling suggestions: "subject:"wide area amonitoring"" "subject:"wide area 19monitoring""
1 |
Exploiting phasor measurement units for enhanced transmission network operation and controlAshton, Phillip Michael January 2014 (has links)
In order to achieve binding Government targets towards the decarbonisation of the electricity network, the GB power system is undergoing an unprecedented amount of change. A series of new technologies designed to integrate massive volumes of renewable generation, predominantly in the form of offshore wind, asynchronously connecting to the periphery of the transmission system, are transforming the requirements of the network. This displacement of traditional thermal generation is leading to a significant reduction in system inertia, thus making the task of system operation more challenging. It is therefore deemed necessary to develop tools and technologies that provide far greater insight into the state of the power system in real-time and give rise to methods for improving offline modelling practices through an enhanced understanding of the systems performance. To that extent PMUs are seen as one of the key enablers of the Smart Grid, providing accurate time-synchronised measurements on the state of the power system, allowing the true dynamics of the power system to be captured and analysed. This thesis provides an analysis of the existing PMU deployment on the GB transmission system with a view to the future system monitoring requirements. A critical evaluation and comparison is also provided on the suitability of a University based Low Voltage PMU network to further enhance the visibility of the GB system. In addition a novel event detection algorithm based on Detrended Fluctuation Analysis is developed and demonstrated, designed to determine the exact start time of a transmission event, as well as the suitability of such an event for additional transmission system analysis, namely inertia estimation. Finally, a reliable method for the estimation of total system inertia is proposed that includes an estimate of the contribution from residual sources, of which there is currently no visibility. The proposed method identifies the importance of regional inertia and its impact to the operation of the GB transmission system.
|
2 |
Identification, Analysis, and Control of Power System Events Using Wide-Area Frequency MeasurementsWang, Joshua Kevin 05 March 2009 (has links)
The power system has long been operated in a shroud of introspection. Only recently have dynamic, wide-area time synchronized grid measurements brought to light the complex relationships between large machines thousands of miles apart. These measurements are invaluable to understanding the health of the system in real time, for disturbances to the balance between generation and load are manifest in the propagation of electromechanical waves throughout the grid. The global perspective of wide-area measurements provides a platform from which the destructive effects of these disturbances can be avoided. Virginia Tech's distributed network of low voltage frequency monitors, FNET, is able to track these waves as they travel throughout the North American interconnected grids. In contrast to other wide-area measurement systems, the ability to easily measure frequency throughout the grid provides a way to identify, locate, and analyze disturbances with high dynamic accuracy. The unique statistical properties of wide-area measurements require robust tools in order to accurately understand the nature of these events. Expert systems and data conditioning can then be used to quantify the magnitude and location of these disturbances without requiring any knowledge of the system state or topology. Adaptive application of these robust methods form the basis for real-time situational awareness and control. While automated control of the power system rarely utilize wide-area measurements, global insight into grid behavior can only improve disturbance rejection. / Ph. D.
|
3 |
Techniques for Wide-Area State Estimation in Power SystemsJeffers, Robert Fredric 27 July 2007 (has links)
Because of a move from Independent System Operators (ISOs) to Regional Transmission Operators (RTOs), a need for real-time wide-area system monitoring has arisen. The state estimator (SE) is the tool currently used in power systems for real-time monitoring. Because current SE techniques become operationally expensive on such large systems, it is beneficial to consider alternate methods for wide-area state estimation (WASE). In particular, hierarchal methods for WASE become beneficial for large systems because of their speed of operation and relatively low data volume. This study tests four hierarchal WASE methods - two taken from literature, and two developed by the author — and compares them with the use of an integrated wide-area estimator. Additionally, because of their accurate and readily available measurement capability, the inclusion of phasor measurement unit (PMU) data in the WASE methods is examined. For the purpose of realistically integrating an RTO WASE with current ISOs, the methods are constrained so that they do not require sensitive data, nor do they alter the operation of the ISOs SE in any way. The methods are tested for speed of operation, global and local accuracy, and robustness under bad data and data loss. / Master of Science
|
4 |
Wide area monitoring and control systems - application communication requirements and simulationChenine, Moustafa January 2009 (has links)
<p>Today’s electrical transmission & distribution systems, are facing a number of challenges related to changing environmental, technical and business factors. Among these factors are, increased environmental restrictions leading to higher share of production from renewable and uncontrollable sources as well as local environmental concerns regarding construction of new transmission and distribution lines. The re-regulation of the electricity market has created a dynamic environment in which multiple organizations have to coordinate and cooperate in the operation and control of the power system. Finally, the high rate of devel-opment within the ICT field is creating many new opportunities for power system opera-tion and control, thanks to introduction of new technologies for measurement, communi-cation and automation.</p><p>As a result of these factors, Wide Area Monitoring and Control (WAMC) systems have been proposed. WAMC systems utilize new ICT based technologies to offer more accurate and timely data on the state of the power system. WAMC systems utilize Phasor Measure-ment Units (PMUs) that have higher data rates and are time synchronised using, GPS satel-lites. This allows synchronized observation of the dynamics of the power system, making it possible to manage the system at a more efficient and responsive level and apply wide area control and protection schemes. The success WAMC systems, on the other hand, are largely dependent on the performance of the Information and Communication Technology (ICT) infrastructure that would support them.</p><p>This thesis investigates the requirements on, and suitability of the ICT systems that support WAMC systems. This was done by identifying WAMC applications and the elicitation of their requirements. Furthermore, a set of simulation projects were carried out to determine the communication system characteristics such as delay and the impact of this delay on the WAMC system.</p><p>This thesis has several contributions. First, it provides summary and analysis of WAMC application priorities and requirements in the Nordic region. Secondly it provides simula-tion based comparison and evaluation of communication paradigms for WAMC systems. The research documented in this thesis addresses these paradigms by providing a compari-son and evaluation through simulation. Thirdly, the thesis provides insight to the possible sources of delay in WAMC architecture and the impact of these delays on data quality specifically data incompleteness. This provides insight on what applications are important to practitioners and what is the expected performance of these applications, as seen from the power system control and operation point of view.</p>
|
5 |
Analyzing Non-Functional Capabilities of ICT Infrastructures Supporting Power System Wide Area Monitoring and ControlChenine, Moustafa January 2013 (has links)
The strain on modern electrical power systems has led to an ever-increasing utilization of new information and communication technologies (ICT) to improve their efficiency and reliability. Wide area monitoring and control (WAMC) systems offer many opportunities to improve the real-time situational awareness in the power system. These systems are essen-tially SCADA systems but with continuous streaming of measurement data from the power system. The quality of WAMC systems and the applications running on top of them are heavily, but not exclusively, dependent on the underlying non-functional quality of the ICT systems. From an ICT perspective, the real-time nature of WAMC systems makes them susceptible to variations in the quality of the supporting ICT systems. The non-functional qualities studied as part of this research are performance, interoperability and cyber security. To analyze the performance of WAMC ICT systems, WAMC applications were identified, and their requirements were elicited. Furthermore, simulation models capturing typical utility communication infrastructure architectures were implemented. The simulation studies were carried out to identify and characterize the latency in these systems and its impact on data quality in terms of the data loss. While performance is a major and desirable quality, other non-functional qualities such as interoperability and cyber security have a significant impact on the usefulness of the sys-tem. To analyze these non-functional qualities, an enterprise architecture (EA) based framework for the modeling and analysis of interoperability and cyber security, specialized for WAMC systems, is proposed. The framework also captures the impact of cyber security on the interoperability of WAMC systems. Finally, a prototype WAMC system was imple-mented to allow the validation of the proposed EA based framework. The prototype is based on existing and adopted open-source frameworks and libraries. The research described in this thesis makes several contributions. The work is a systematic approach for the analysis of the non-functional quality of WAMC ICT systems as a basis for establishing the suitability of ICT system architectures to support WAMC applications. This analysis is accomplished by first analyzing the impact of communication architectures for WAMC systems on the latency. Second, the impact of these latencies on the data quali-ty, specifically data currency (end to end delay of the phasor measurements) and data in-completeness (i.e., the percentage of phasor measurements lost in the communication), is analyzed. The research also provides a framework for interoperability and cyber security analysis based on a probabilistic Monte Carlo enterprise architecture method. Additionally, the framework captures the possible impact of cyber security on the interoperability of WAMC data flows. A final result of the research is a test bed where WAMC applications can be deployed and ICT architectures tested in a controlled but realistic environment. / <p>QC 20130218</p>
|
6 |
Data Quality in Wide-Area Monitoring and Control Systems : PMU Data Latency, Completness, and Design of Wide-Area Damping SystemsZhu, Kun January 2013 (has links)
The strain on modern electrical power system operation has led to an ever increasing utilization of new Information Communication Technology (ICT) systems to enhance the reliability and efficiency of grid operation. Among these proposals, Phasor Measurement Unit (PMU)-based Wide-Area Monitoring and Control (WAMC) systems have been recognized as one of the enablers of “Smart Grid”, particularly at the transmission level, due to their capability to improve the real-time situational awareness of the grid. These systems differ from the conventional Supervisory Control And Data Acquisition (SCADA) systems in that they provide globally synchronized measurements at high resolutions. On the other hand, the WAMC systems also impose several stringent requirements on the underlying ICT systems, including performance, security, and availability, etc. As a result, the functionality of the WAMC applications is heavily, but not exclusively, dependent on the capabilities of the underlying ICT systems. This tight coupling makes it difficult to fully exploit the benefits of the synchrophasor technology without the proper design and configuration of ICT systems to support the WAMC applications. The strain on modern electrical power system operation has led to an ever increasing utilization of new Information Communication Technology (ICT) systems to enhance the reliability and efficiency of grid operation. Among these proposals, Phasor Measurement Unit (PMU)-based Wide-Area Monitoring and Control (WAMC) systems have been recognized as one of the enablers of “Smart Grid”, particularly at the transmission level, due to their capability to improve the real-time situational awareness of the grid. These systems differ from the conventional Supervisory Control And Data Acquisition (SCADA) systems in that they provide globally synchronized measurements at high resolutions. On the other hand, the WAMC systems also impose several stringent requirements on the underlying ICT systems, including performance, security, and availability, etc. As a result, the functionality of the WAMC applications is heavily, but not exclusively, dependent on the capabilities of the underlying ICT systems. This tight coupling makes it difficult to fully exploit the benefits of the synchrophasor technology without the proper design and configuration of ICT systems to support the WAMC applications. In response to the above challenges, this thesis addresses the dependence of WAMC applications on the underlying ICT systems. Specifically, two of the WAMC system data quality attributes, latency and completeness, are examined together with their effects on a typical WAMC application, PMU-based wide-area damping systems. The outcomes of this research include quantified results in the form of PMU communication delays and data frame losses, and probability distributions that can model the PMU communication delays. Moreover, design requirements are determined for the wide-area damping systems, and three different delay-robust designs for this WAMC application are validated based on the above results. Finally, a virtual PMU is developed to perform power system and communication network co-simulations. The results reported by this thesis offer a prospect for better predictions of the performance of the supporting ICT systems in terms of PMU data latency and completeness. These results can be further used to design and optimize the WAMC applications and their underlying ICT systems in an integrated manner. This thesis also contributes a systematic approach to design the wide-area damping system considering the PMU data latency and completeness. Finally, the developed virtual PMU, as part of a co-simulation platform, provides a means to investigate the dependence of WAMC applications on the capabilities of the underlying ICT systems in a cost-efficient manner. / <p>QC 20131015</p>
|
7 |
Wide area monitoring and control systems - application communication requirements and simulationChenine, Moustafa January 2009 (has links)
Today’s electrical transmission & distribution systems, are facing a number of challenges related to changing environmental, technical and business factors. Among these factors are, increased environmental restrictions leading to higher share of production from renewable and uncontrollable sources as well as local environmental concerns regarding construction of new transmission and distribution lines. The re-regulation of the electricity market has created a dynamic environment in which multiple organizations have to coordinate and cooperate in the operation and control of the power system. Finally, the high rate of devel-opment within the ICT field is creating many new opportunities for power system opera-tion and control, thanks to introduction of new technologies for measurement, communi-cation and automation. As a result of these factors, Wide Area Monitoring and Control (WAMC) systems have been proposed. WAMC systems utilize new ICT based technologies to offer more accurate and timely data on the state of the power system. WAMC systems utilize Phasor Measure-ment Units (PMUs) that have higher data rates and are time synchronised using, GPS satel-lites. This allows synchronized observation of the dynamics of the power system, making it possible to manage the system at a more efficient and responsive level and apply wide area control and protection schemes. The success WAMC systems, on the other hand, are largely dependent on the performance of the Information and Communication Technology (ICT) infrastructure that would support them. This thesis investigates the requirements on, and suitability of the ICT systems that support WAMC systems. This was done by identifying WAMC applications and the elicitation of their requirements. Furthermore, a set of simulation projects were carried out to determine the communication system characteristics such as delay and the impact of this delay on the WAMC system. This thesis has several contributions. First, it provides summary and analysis of WAMC application priorities and requirements in the Nordic region. Secondly it provides simula-tion based comparison and evaluation of communication paradigms for WAMC systems. The research documented in this thesis addresses these paradigms by providing a compari-son and evaluation through simulation. Thirdly, the thesis provides insight to the possible sources of delay in WAMC architecture and the impact of these delays on data quality specifically data incompleteness. This provides insight on what applications are important to practitioners and what is the expected performance of these applications, as seen from the power system control and operation point of view.
|
8 |
Standards-based sensor web for wide area monitoring of power systemsDahal, Nischal 08 August 2009 (has links)
The balance of supply and demand of energy is the key factor in the stability of power systems. A small disturbance in the supply demand relationship, if not properly handled, can cascade into a major outage, costing millions of dollars to the stakeholders. Proper monitoring and exchange of critical information in real time is the only solution to prevent the instability in this vulnerable system. But, the disparity in the protocols used by power utilities and the lack of infrastructure for information exchange are proving to be hindrance to obtaining a reliable de-regularized power industry. In this thesis, an emerging Sensor Web Enablement (SWE) has been adapted for the wide area monitoring of power systems. SWE and CIM provide a solution to both problems; the heterogeneity of data and the lack of central repository of the data for proper action. The sensor data from utilities that are published in CIM were modeled thorough a SensorML and exposed via a Sensor Observation Service (SOS). This provides a standard method for discovering and accessing the sensor data between utilities and facilitates rapid response functionality to handle contingences.
|
9 |
Modal Analysis Techniques in Wide-Area Frequency Monitoring SystemsBaldwin, Mark W. 11 April 2008 (has links)
The advent of synchronized wide-area frequency measurements obtained from frequency disturbance recorders and phasor measurement units has presented the power industry with special opportunities to study power system dynamics. I propose the use of wide-area frequency measurements in identifying system disturbances based on power system post-event modal properties.
In this work, power system dynamics are examined from an internal system energy viewpoint. Since an electric power system is composed of coupled rotating machines (large generators) which have air gap magnetic fields that are essentially static, or quasi-static, the power system may be modeled as a system with energy stored in quasi-static magnetic fields. The magnetic fields in the machines do change with time but may be modeled as static as far as wave propagation is concerned. The dynamic model that I develop treats this magnetic energy specifically as potential energy. Each rotating machine also contains an inertia due to the mass and motion of its rotor train and so each machine contains a rotational kinetic energy. Thus the internal system energy for a power system dynamic model may be considered to be contained in potential (magnetic) and kinetic (rotating mass) energies. This notion of internal energy lends itself to the use of a state-space model where each system state is associated with either a kinetic energy or a potential energy. An n-machine system would have a total of 2n states and would thus be a 2n-th order system. For many power system disturbances, I postulate that a linearized version of this model may be used to examine system natural response in terms of frequency and phasor measurements. The disturbances that I will investigate include generator and line outages. For any particular outage, the power system exhibits a very specific natural response in terms of its kinetic and potential energies. Kinetic energy in the system is directly related to each specific machine's rotational speed. I propose that the kinetic energy corresponds directly with bus frequencies through a linear transformation. Likewise magnetic field energy in each machine corresponds directly with a torque angle. The potential energy in the system thus corresponds directly with bus angles through a linear transformation.
The primary focus of this work is on frequency deviation modal characteristics – specifically damped oscillation frequencies, mode shapes, and damping ratios. This work presents how specific disturbances on a power system will lead to specific oscillation frequencies in the deviation quantities and that these oscillation frequencies may be used to identify the disturbance. The idea of disturbance identification stems out of previous work done in locating disturbances by using a distributed parameter (DP) model of an electric power system. This DP model, which assumes a wave-like motion of frequency and phase quantities, was used to locate disturbances via a triangulation method. This present work, instead of using a DP model of the power system, assumes lumped parameters and focuses on disturbance identification strictly via modal characteristics – particularly oscillation frequency in the frequency deviations. This model is not concerned with geographic location but focuses on system topology, loading, and machine mass as lumped parameters. Advantages of disturbance identification include mainly reliability enhancements but can also be used in marketing applications.
The state-space model used to realize this theory is verified via simulation using small, "academic" systems which should prove useful in classroom settings. Additionally the model is verified on a larger test system in order prove its validity and potential usefulness on large power systems. / Ph. D.
|
10 |
Power Systems Analysis in the Power-Angle DomainArana, Andrew Jex 23 December 2009 (has links)
The idea of performing power systems dynamic analysis in the power-angle domain has been hinted at by previous researchers, but this may be the first published document to develop detailed techniques by which entire power systems can be represented and solved in the power-angle domain. With the widespread deployment of phasor measurement units and frequency data recorders the industry is looking for more real-time analytical tools to turn real-time wide-area measurements into useful information. Applications based on power-angle domain analysis are simple enough that they may be used online.
Power-angle domain analysis is similar to DC load-flow techniques in that a flat voltage profile is used and it is assumed that real power and voltage angle are completely decoupled from reactive power and voltage magnitude. The linearized equations for the dynamics of generators and loads are included in the model, which allows the electromechanical response to be solved using conventional circuit analysis techniques. The effect of generation trips, load switching, and line switching can be quickly approximated with nodal analysis or mesh analysis in the power-angle domain.
The analysis techniques developed here are not intended to be as accurate as time-domain simulation, but they are simpler and fast enough to be put online, and they also provide a better analytical insight into the system. Power-angle domain analysis enables applications that are not readily available with conventional techniques, such as the estimation of electromechanical propagation delays based on system parameters, the formulation of electromechanical equivalents, modal analysis, stability analysis, and event location and identification based on a small number of angle or frequency measurements. Fault studies and contingency analysis are typically performed with detailed time-domain simulations, where the electromechanical response of the system is a function of every machine in the interconnection and the lines connecting them. All of this information is rarely known for the entire system for each operating condition; as a result, for many applications it may be more suitable to compute an approximation of the system response based on the current operating state of only the major lines and generators. Power-angle domain analysis is adept at performing such approximations. / Ph. D.
|
Page generated in 0.1102 seconds