11 |
Structure-Morphology-Property Relationships in Perfluorosulfonic Acid Ionomer Dispersions, Membranes, and Thin Films to Advance Hydrogen Fuel Cell ApplicationsNovy, Melissa Hoang Lan 22 June 2022 (has links)
Recent efforts toward the commercialization of hydrogen fuel cells, a sustainable energy technology, have led to interest in the effects of industrial processing parameters on the morphology and properties of fuel cell ionomers. The ionomer functions as a solid electrolyte membrane on the order of microns thick and as a thin film on the order of tens of nanometers in the catalyst layer. Industrial manufacture of the membrane and catalyst layer is typically a roll-to-roll process that involves casting a colloidal dispersion of the fuel cell ionomer in predominantly mixed alcohol/water solvent systems onto a backing film or substrate, followed by evaporation of the solvent and annealing of the ionomer at elevated temperatures. The current benchmark fuel cell ionomers are a class of polymers with pendant perfluorinated side chains terminating in sulfonic acid groups, called perflurosulfonic acid ionomers (PFSAs). The purpose of this dissertation is to investigate the effects of industrial processing parameters such as dispersion solvent composition, solvent evaporation temperature, and annealing temperature on fuel cell-relevant properties of PFSA solid electrolyte membranes and model thin films. Particular focus is given to newer-generation PFSAs and the effect of their different chemical structures on the morphology and properties of dispersions, membranes, and thin films. Dipole-dipole interactions between colloidal aggregates modulated by solvent composition were found to significantly influence the viscosity of PFSA dispersions. A framework of PFSA-solvent interactions is developed to predict the onset of dipole-dipole interactions as a function of PFSA chemical structure and solvent composition. Increased steric hindrance of shorter PFSA side chain chemical structures is found to inhibit morphological development, resulting in membranes with poorer wet and dry mechanical properties. A shorter side-chain PFSA is suggested to require higher processing temperatures to achieve performance equivalent to a PFSA with slightly longer side chain. The morphology and properties of model PFSA thin films are demonstrated to decay to quasi-equilibrium values upon physical aging at both low and high relative humidity (RH). Thin film swelling curves are demonstrated to be superposable by implementing an aging time-RH shift factor, allowing for prediction of quasi-equilibration times under given fuel cell operating conditions. / Doctor of Philosophy / Interest in environmentally friendly, sustainable energy sources has led to significant industrial, academic, and governmental efforts to commercialize hydrogen fuel cells. Hydrogen gas is split into protons and electrons in the anode catalyst layer. The electrons flow through an external circuit to produce electricity, while the protons are transported from the catalyst layer through a solid electrolyte membrane to the anode to react with oxygen to form water. A key component of hydrogen fuel cells is an ion-containing polymer called an ionomer that is required for the transport of (1) protons in the solid electrolyte membrane and (2) protons and reactant gases in the catalyst layer. The solid electrolyte membrane and catalyst layer can be industrially produced by a continuous process that involves dispersing the ionomer in a mixed alcohol/water solvent and coating it onto a backing film, followed by evaporation of the solvent and annealing of the ionomer. The present work is an investigation of the effect of industrially-relevant processing parameters on the morphology and properties of a class of ionomers called perfluorosulfonic acid ionomers (PFSAs), which phase separate into hydrophilic domains that serve as transport pathways and hydrophobic domains that impart thermomechanical stability. Practical aspects of the processing and function of PFSAs, including viscosity of the PFSA dispersion, minimum processing temperature to achieve solvent stability, and physical aging of the PFSA during fuel cell operation are shown to be fundamentally related to the PFSA chemical structure and morphology.
|
12 |
Theory of elastic and inelastic X-ray scatteringMoreno Carrascosa, Andrés January 2018 (has links)
X-rays have been widely exploited to unravel the structure of matter since their discovery in 1895. Nowadays, with the emergence of new X-ray sources with higher intensity and very short pulse duration, notably X-ray Free Electron Lasers, the number of experiments that may be considered in the X-ray regime has increased dramatically, making the characterization of gas phase atoms and molecules in space and time possible. This thesis explores in the theoretical analysis and calculation of X-ray scattering atoms and molecules, far beyond the independent atom model. Amethod to calculate inelastic X-ray scattering from atoms and molecules is presented. The method utilizes electronic wavefunctions calculated using ab-initio electronic structure methods. Wavefunctions expressed in Gaussian type orbitals allow for efficient calculations based on analytical Fourier transforms of the electron density and overlap integrals. The method is validated by extensive calculations of inelastic cross-sections in H, He+, He, Ne, C, Na and N2. The calculated cross-sections are compared to cross-sections from inelastic X-ray scattering experiments, electron energy-loss spectroscopy, and theoretical reference values. We then begin to account for the effect of nuclear motion, in the first instance by predicting elastic X-ray scattering from state-selected molecules. We find strong signatures corresponding to the specific vibrational and rotational state of (polyatomic) molecules. The ultimate goal of this thesis is to study atomic and molecular wavepackets using time-resolved X-ray scattering. We present a theoretical framework based on quantum electrodynamics and explore various elastic and inelastic limits of the scattering expressions. We then explore X-ray scattering from electronic wavepackets, following on from work by other groups, and finally examine the time-resolved X-ray scattering from non-adiabatic electronic-nuclear wavepackets in the H2 molecule, demonstrating the importance of accounting for the inelastic effects.
|
13 |
Elucidation of Ionomer/Electrode Interfacial Phenomena in Polymer Electrolyte Fuel Cells / 固体高分子形燃料電池におけるイオノマー/電極界面現象の解明Gao, Xiao 27 July 2020 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(人間・環境学) / 甲第22708号 / 人博第958号 / 新制||人||227(附属図書館) / 2020||人博||958(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 高木 紀明, 教授 中村 敏浩 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM
|
14 |
The Effect of Ionomer Architecture on the Morphology in Gel State Functionalized Sulfonated Syndiotactic PolystyreneFahs, Gregory Bain 04 March 2020 (has links)
This dissertation presents a discussion of blocky and randomly functionalized sulfonated syndiotactic polystyrene copolymers. These copolymers have been prepared over a range of functionalization (from 2% to 10%) in order to assess the effect of the incorporation of these polar side groups on both the thermal behavior and morphology of these polymer systems. The two different architectures are achieved by conducting the reaction in both the heterogeneous gel-state to obtain blocky copolymers and in the homogeneous solution state to obtain randomly functionalized copolymers. In order to compare both the thermal properties and morphology of these two systems several sets of samples were prepared at comparable levels of sulfonation. Thermal analysis of these two systems proved that the blocky functionalized copolymers provided superior properties with regard to the speed and total amount of the crystalline component of sulfonated syndiotactic polystyrene. Above 3% functionalizion the randomly functionalized copolymer was no longer able to crystallize, whereas, the blocky functionalized copolymer is able to crystallize even at a functionalization level of 10.5% sulfonate groups. When considering the morphology of these systems even at low percentages of sulfonation it is clear that the distribution of these groups is different based on the amplitude of the signal measured by small angle x-ray scattering. Additionally, methods were developed to describe both the distribution of ionic multiplets, which varies between blocky and randomly functionalized systems, but also the distribution of crystals. At a larger scale ultra-small angle x-ray scattering was employed to attempt to understand the clustering of ionic multiplets in these systems. Randomly functionalized polymers should a peak that is attributed to ion clusters, whereas blocky polymers show no such peak. Additional studies have also been done to look at the analysis of crystallite sizes in these systems when there are multiplet polymorphs present, it was observed the polymorphic composition is drastically different. All of these studies support that these systems bear vastly different thermal behavior and possess significantly different morphologies. This supports the hypothesis that this gel-state heterogeneous functionalization procedure produces a much different chain architecture compared to homogeneous functionalization in the solution-state. / Doctor of Philosophy / Polymers are a class of chemicals that are defined by having a very large set of molecules that are chemically linked together where each unit (monomer) is repeated within the chemical structure. In particular, this dissertation focuses on the construction what are termed as "blocky" copolymers, which are defined by having two chemically different monomers that are incorporated in the polymer chain. The "blocky" characteristic of these polymers means that these two different monomers are physically segregated from each other on the polymer chain, where long portions of the chain that are of one type, followed by another section of the polymer that has the other type of monomer. The goal of creating this type of structure is to try to take advantage of the properties of both types of monomers, which can create materials with superior synergistic properties. In this case a hydrophobic (water hating) monomer is combined with a hydrophilic (water loving) chain. This hydrophobic component in the polymer is able to crystallize, which provides mechanical and thermal stability in the material by acting as a physical tether to hold neighboring chains together. With the other set of hydrophilic monomers, which in this case have an ionic component incorporated, we can now take advantage of this chemical components ability to aide in the transportation of ions. Transportation of ions is useful in a variety of commercially relevant applications, two of the most important applications of these ionic materials is in membranes that can be used to purify water or membrane materials in fuel cell technologies, specifically for proton exchange membranes. The focus of this research in particular was to create a simple synthesis technique that can create these blocky polymer chain architectures, which is done by performing the reaction while the polymer is made into a gel. The key to this is that the crystals within the gel act as a barrier to chemical reactions, creating conditions where we have substantial portions of the material that are able to be functionalized and the crystals within the material that are protected from being functionalized. By looking at the thermal characteristics, such as melting temperatures and amount of crystals within these systems we have seen that functionalizing these polymers in the heterogeneous gel state gives substantially better properties than functionalizing these materials randomly. Much like oil and water, incompatible polymer chains will phase separate from each other. In this case the hydrophobic and ionic components will phase separate from each other. The shape and distribution of these phase separated structure will dictate many of the material properties, which can be described by modeling the data collected from x-ray scattering experiments. All of this information will tell us based on the initial conditions that these polymers were created in, what properties should be expected based on the morphology and thermal behavior. This gives a better understanding of how to fine tune these properties based on the structure of the gel and chemical reaction conditions.
|
15 |
A dense plasma focus device as a pulsed neutron source for material identificationMohamed, Amgad Elsayed Soliman January 1900 (has links)
Doctor of Philosophy / Department of Mechanical and Nuclear Engineering / William L. Dunn / Dense plasma focus (DPF) devices are pulsed power devices capable of producing short-lived, hot and dense plasmas (~10[superscript]19 cm[superscript]-3) through a fast compression of plasma sheath. A DPF device provides intense bursts of electrons and ion beams, X-rays, and 2.5 MeV neutrons when operated with deuterium through the fusion reaction [superscript]2H(d,n)[superscript]3He. The Kansas State University DPF machine was designed and constructed in early 2010. The device was characterized to determine its performance as a neutron source. The device was shown to produce 5.0x10[superscript]7 neutrons/pulse using a tungsten-copper anode. Such machines have the advantages of being non-radioactive, movable, and producing short pulses (typically tens of nanoseconds), which allows rapid interrogation. The signature-based radiation-scanning (SBRS) method has been used to distinguish targets that contain explosives or explosive surrogates from targets that contain materials called “inert,” meaning they are not explosive-like.
Different targets were placed in front of the DPF source at a distance of 45 cm. Four BC-418 plastic scintillators were used to measure the direct neutron yield and the neutrons scattered from various targets; the neutron source and the detectors were shielded with layers of lead, stainless steel, and borated polyethylene to shield against the X-rays and neutrons. One of the plastic scintillators was set at 70[supercript]o and two were set at 110[superscript]o from the line of the neutron beam; a bare [superscript]3He tube was used for detecting scattered thermal neutrons.
Twelve metal cans of one-gallon each containing four explosive surrogates and eight inert materials were used as targets. Nine materials in five-gallon cans including three explosive surrogates were also used. The SBRS method indicated a capability to distinguish the explosive surrogates in both experiments, although the five gallon targets gave more accurate results. The MCNP code was used to validate the experimental work and to simulate real explosives. The simulations indicated the possibility to use the time of flight (TOF) technique in future experimental work, and were able to distinguish all the real explosives from the inert materials.
|
16 |
X-ray scattering and spectroscopy of supercooled water and iceSellberg, Jonas A. January 2014 (has links)
This thesis presents experimental studies of water and ice at near-atmospheric pressures using intense x-rays only accessible at synchrotrons and free-electron lasers. In particular, it focuses on the deeply supercooled, metastable state and its implications on ice nucleation. The local structure of the liquid phase was studied by x-ray scattering over a wide temperature range extending from 339 K down to 227 K. In order to be able to study the deeply supercooled liquid, micron-sized water droplets were evaporatively cooled in vacuum and probed by ultrashort x-ray pulses. This is to date the lowest temperature at which measurements of the structure have been performed on bulk liquid water cooled from room temperature. Upon deep supercooling, the structure evolved toward that of a low-density liquid with local tetrahedral coordination. At ~230 K, where the low-density liquid structure started to dominate, the number of droplets containing ice nuclei increased rapidly. The estimated nucleation rate suggests that there is a “fragile-to-strong” transition in the dynamics of the liquid below 230 K, and its implications on water structure are discussed. Similarly, the electronic structure of deeply supercooled water was studied by x-ray emission spectroscopy down to 222 K, but the spectral changes expected from the structural transformation remained absent and explanations are discussed. At high fluence, the non-linear dependence of the x-ray emission yield indicated that there were high valence hole densities created during the x-ray pulse length due to Auger cascades, resulting in reabsorption of the x-ray emission. Finally, the hydrogen-bonded network in water was studied by x-ray absorption spectroscopy and compared to various ices. It was found that the pre-edge absorption cross-section, which is associated with distorted hydrogen bonds, could be minimized for crystalline ice grown on a hydrophobic BaF2(111) surface with low concentration of nucleation centers. / <p>At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: Manuscript. Paper 3: Manuscript. Paper 4: Manuscript. Paper 5: Manuscript. Paper 6: Manuscript.</p>
|
17 |
Crystallization on the Mesoscale : Self-Assembly of Iron Oxide Nanocubes into MesocrystalsAgthe, Michael January 2016 (has links)
Self-assembly of nanoparticles is a promising route to form complex, nanostructured materials with functional properties. Nanoparticle assemblies characterized by a crystallographic alignment of the nanoparticles on the atomic scale, i.e. mesocrystals, are commonly found in nature with outstanding functional and mechanical properties. This thesis aims to investigate and understand the formation mechanisms of mesocrystals formed by self-assembling iron oxide nanocubes. We have used the thermal decomposition method to synthesize monodisperse, oleate-capped iron oxide nanocubes with average edge lengths between 7 nm and 12 nm and studied the evaporation-induced self-assembly in dilute toluene-based nanocube dispersions. The influence of packing constraints on the alignment of the nanocubes in nanofluidic containers has been investigated with small and wide angle X-ray scattering (SAXS and WAXS, respectively). We found that the nanocubes preferentially orient one of their {100} faces with the confining channel wall and display mesocrystalline alignment irrespective of the channel widths. We manipulated the solvent evaporation rate of drop-cast dispersions on fluorosilane-functionalized silica substrates in a custom-designed cell. The growth stages of the assembly process were investigated using light microscopy and quartz crystal microbalance with dissipation monitoring (QCM-D). We found that particle transport phenomena, e.g. the coffee ring effect and Marangoni flow, result in complex-shaped arrays near the three-phase contact line of a drying colloidal drop when the nitrogen flow rate is high. Diffusion-driven nanoparticle assembly into large mesocrystals with a well-defined morphology dominates at much lower nitrogen flow rates. Analysis of the time-resolved video microscopy data was used to quantify the mesocrystal growth and establish a particle diffusion-based, three-dimensional growth model. The dissipation obtained from the QCM-D signal reached its maximum value when the microscopy-observed lateral growth of the mesocrystals ceased, which we address to the fluid-like behavior of the mesocrystals and their weak binding to the substrate. Analysis of electron microscopy images and diffraction patterns showed that the formed arrays display significant nanoparticle ordering, regardless of the distinctive formation process. We followed the two-stage formation mechanism of mesocrystals in levitating colloidal drops with real-time SAXS. Modelling of the SAXS data with the square-well potential together with calculations of van der Waals interactions suggests that the nanocubes initially form disordered clusters, which quickly transform into an ordered phase. / <p>At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 4: Manuscript. Paper 5: Manuscript.</p>
|
18 |
Structural optimization of polypod-like structured DNA based on structural analysis and interaction with cells / 構造解析および細胞との相互作用解析に基づく多足型DNA構造体の構造最適化に関する研究Tan, Mengmeng 23 March 2020 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(薬科学) / 甲第22397号 / 薬科博第119号 / 新制||薬科||13(附属図書館) / 京都大学大学院薬学研究科薬科学専攻 / (主査)教授 髙倉 喜信, 教授 山下 富義, 教授 小野 正博 / 学位規則第4条第1項該当 / Doctor of Pharmaceutical Sciences / Kyoto University / DFAM
|
19 |
Probing the spin-orbit Mott state in Sr3Ir2O7 by electron dopingHogan, Thomas C. January 2016 (has links)
Thesis advisor: Stephen D. Wilson / Iridium-based members of the Ruddlesden-Popper family of oxide compounds are characterized by a unique combination of energetically comparable effects: crystal-field splitting, spin-orbit coupling, and electron-electron interactions are all present, and the combine to produce a Jeff = 1/2 ground state. In the bilayer member of this series, Sr3Ir2O7, this state manifests as electrically insulating, with unpaired Ir4+ spins aligned along the long axis of the unit cell to produce a G-type antiferromagnet with an ordered moment of 0.36 uB. In this work, this Mott state is destabilized by electron doping via La3+ substitution on the Sr-site to produce (Sr1−x Lax)3Ir2O7. The introduction of carriers initially causes nano-scale phase-separated regions to develop before driving a global insulator-to-metal transition at x=0.04. Coinciding with this transition is the disappearance of evidence of magnetic order in the system in either bulk magnetization or magnetic scattering experiments. The doping also enhances a structural order parameter observed in the parent compound at forbidden reciprocal lattice vectors. A more complete structural solution is proposed to account for this previously unresolved distortion, and also offers an explanation as to the anomalous net ferromagnetism seen prior in bulk measurements. Finally, spin dynamics are probed via a resonant x-ray technique to reveal evidence of spin-dimer-like behavior dominated by inter-plane interactions. This result supports a bond-operator treatment of the interaction Hamiltonian, and also explains the doping dependence of high temperature magnetic susceptibility. / Thesis (PhD) — Boston College, 2016. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Physics.
|
20 |
Determinação experimental dos perfis de espalhamento de tecidos mamários (normais e alterados) e sua potencialidade como ferramenta de diagnóstico / Experimental determination of scattering profiles from breast tissues (normal and altered) and its potentiality as a diagnostic tool.Oliveira, Otávio Riani de 24 March 2006 (has links)
A distribuição angular de fótons espalhados (perfil de espalhamento) pode fornecer informações sobre as estruturas que compõe um tecido biológico, permitindo, a partir da análise desta, identificar a presença de anormalidades no tecido. A proposta deste trabalho foi desenvolver um procedimento experimental de medidas do perfil de espalhamento de tecidos mamários normais e alterados e, posteriormente, correlacionar as informações contidas neste com informações histopatológicas do tecido. Os perfis de espalhamento foram medidos no intervalo de momento transferido entre 0,2<= ? <=6,2 nm-1, utilizando um difractômetro Siemens D-5005, com ânodo de cobre e operando no modo reflexão. As amostras de tecidos mamários, foram previamente classificadas como tecidos normais, fibroadenomas e carcinomas. As intensidades medidas foram corrigidas por atenuação, efeitos geométricos e pela variação angular do feixe incidente. A eficácia do procedimento experimental foi validada através do uso de dados de referência para amostras de água. Os resultados mostraram que o perfil de espalhamento é uma característica única de cada tipo de tecido, sendo sua forma relacionada à morfologia microscópica do tecido. Na região em que x<=0,35 nm-1, verificou-se estatisticamente que as informações contidas nos perfis de espalhamento permitem a diferenciação entre tecidos normais e alterados. / Angular distribution of photons scattered by tissues (scattering profile) gives detailed information of structures within them and provides an alternative mean of distinguishing pathologies. The proposal of this work was to develop an experimental procedure to determine scattering profiles from breast tissues (normal and neoplastic) and to correlate the information contained in these profiles with histopathological information. The scattering profiles were measured in the interval of momentum transfer 0,2 ? ? ? 6,2 nm-1, using a powder diffractomer apparatus (Siemens D-5005), with copper anode and operation in reflection mode. The breast samples were previously histopathologically classified as normal tissues, fibroadenomes and carcinomas. The measured angular distribution was corrected by attenuation, geometric effect and the angular variation of the incident beam. The effectiveness of the experimental procedure was validated through the use of water reference data. The results shown that, scattering profile is unique impression of each type of tissue, being correlated with the microscopic morphological features. In the region where ? ? 0,35 nm-1, were statistically verified that the information contained in the scattering profiles allow the differentiation between normal and neoplastic breast tissues.
|
Page generated in 0.1177 seconds