Two problems hampering efforts to produce salt-tolerant plants through constitutive expression of transgenes include: 1. Spatial control. Particular cell-types must respond specifically to salt stress to minimise the amount of Na⁺ delivered to the shoot; and, 2. Temporal control. Transgenes are typically expressed in plants at similar levels through time, irrespective of the stress encountered by the plant, which may exacerbate pleiotropic effects and means that, particularly in low-stress conditions, costly and/or detrimental metabolic processes may be active, thus reducing yield. To address these issues, Gateway® destination vector constructs were developed combining the GAL4 UAS (upstream activating sequence) with the ethanol-inducible gene expression system to drive inducible cell-specific expression of Na⁺ transporter transgenes (or to silence salt transporter transgenes inducibly and cell-specifically). Rice (Oryza sativa L. cv. Nipponbare) GAL4-GFP enhancer trap lines (Johnson et al., 2005: Plant J. 41, 779-789) that express GAL4 and GFP specifically in either the root epidermis or xylem parenchyma (and therefore ‘trap’ cell-type specific enhancer elements) were transformed with this GAL4 UAS – ethanol switch construct, thereby allowing both spatial and temporal control of transgenes. In preliminary experiments, the expression system successfully limited the expression of RFP to specific cell-types after induction with ethanol. Other genes expressed using this system include PpENA1, a Na⁺-extruding ATPase from the moss, Physcomitrella patens, and AtHKT1;1, a Na ⁺ transporter from Arabidopsis thaliana. The two enhancer trap rice lines were also transformed with the GAL4 UAS driving stable expression of AtHKT1;1 and PpENA1 specifically in root epidermal or xylem parenchyma cells. Expression of AtHKT1;1 in root epidermal cells reduced Na⁺ accumulation in the shoots, while expression in the root xylem parenchyma appeared to have little effect on shoot Na⁺ accumulation. Using cryo-scanning electron microscopy (SEM) X-ray microanalysis, the outer cells of the roots of the line expressing AtHKT1;1 in the epidermal cells were found to accumulate higher levels of Na⁺ than the parental enhancer trap line. Additionally, this line had decreased unidirectional ²²Na⁺ influx. Similar results were observed for plants expressing AtHKT1;1 driven by the CaMV 35S / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1325289 / Thesis (Ph.D.) -- University of Adelaide, School of Agriculture, Food and Wine, 2008

Two problems hampering efforts to produce salt-tolerant plants through constitutive expression of transgenes include: 1. Spatial control. Particular cell-types must respond specifically to salt stress to minimise the amount of Na⁺ delivered to the shoot; and, 2. Temporal control. Transgenes are typically expressed in plants at similar levels through time, irrespective of the stress encountered by the plant, which may exacerbate pleiotropic effects and means that, particularly in low-stress conditions, costly and/or detrimental metabolic processes may be active, thus reducing yield. To address these issues, Gateway® destination vector constructs were developed combining the GAL4 UAS (upstream activating sequence) with the ethanol-inducible gene expression system to drive inducible cell-specific expression of Na⁺ transporter transgenes (or to silence salt transporter transgenes inducibly and cell-specifically). Rice (Oryza sativa L. cv. Nipponbare) GAL4-GFP enhancer trap lines (Johnson et al., 2005: Plant J. 41, 779-789) that express GAL4 and GFP specifically in either the root epidermis or xylem parenchyma (and therefore ‘trap’ cell-type specific enhancer elements) were transformed with this GAL4 UAS – ethanol switch construct, thereby allowing both spatial and temporal control of transgenes. In preliminary experiments, the expression system successfully limited the expression of RFP to specific cell-types after induction with ethanol. Other genes expressed using this system include PpENA1, a Na⁺-extruding ATPase from the moss, Physcomitrella patens, and AtHKT1;1, a Na ⁺ transporter from Arabidopsis thaliana. The two enhancer trap rice lines were also transformed with the GAL4 UAS driving stable expression of AtHKT1;1 and PpENA1 specifically in root epidermal or xylem parenchyma cells. Expression of AtHKT1;1 in root epidermal cells reduced Na⁺ accumulation in the shoots, while expression in the root xylem parenchyma appeared to have little effect on shoot Na⁺ accumulation. Using cryo-scanning electron microscopy (SEM) X-ray microanalysis, the outer cells of the roots of the line expressing AtHKT1;1 in the epidermal cells were found to accumulate higher levels of Na⁺ than the parental enhancer trap line. Additionally, this line had decreased unidirectional ²²Na⁺ influx. Similar results were observed for plants expressing AtHKT1;1 driven by the CaMV 35S / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1325289 / Thesis (Ph.D.) -- University of Adelaide, School of Agriculture, Food and Wine, 2008

Afin d’accroitre le rendement des turbomachines les motoristes aéronautiques visent à développer de nouveaux matériaux réfractaires permettant d’augmenter les températures de service des parties les plus chaudes. Les travaux présentés dans ce mémoire s’inscrivent dans ce contexte et ont pour cadre le projet européen FP7-HYSOP dans lequel les alliages Nbss-Nb5Si3 sont à l’étude. Alors que d’un point de vue mécanique leurs propriétés sont compatibles avec leur industrialisation, leur résistance à l’oxydation dès les températures intermédiaires (800°C) constitue l’obstacle majeur à leur application. Deux voies sont suivies dans ce travail pour améliorer ce comportement. La première vise à évaluer l’effet d’un affinement de microstructure en synthétisant l’alliage Nbss-Nb5Si3 soit par la voie fusion, soit par métallurgie des poudres. Il a été montré que les microstructures les plus fines permettent de diminuer les cinétiques d’oxydations à 1100°C, et de s’affranchir des phénomènes d’oxydation catastrophique dont souffrent les alliages à microstructure grossière à 815°C. Des modèles diffusionnels gouvernant l’oxydation de ces matériaux ont pu être proposés. La seconde partie se focalise sur le développement de revêtements à base de siliciures, par la technique de cémentation activée en caisse, dont le caractère protecteur est assuré principalement par la formation d’une couche de silice (SiO2). Une série de tests d’oxydation/corrosion, représentative des conditions extrêmes régnant en sortie de chambre de combustion (isotherme ou cyclique, sous air, air + H2O, mélange silicaté CMAS), a permis d’évaluer et de hiérarchiser les performances des différents systèmes revêtus / Progress in the field of gas-Turbine engines for aircrafts is controlled by the availability of new structural materials able to withstand higher temperatures than nickel based superalloys. The present PhD work was conducted in this context, within the framework of the European FP7-HYSOP project, in which Nbss-Nb5Si3 alloys are studied. From a mechanical point of view, the physicochemical properties (room temperature fracture toughness and creep rate) are compatible with the targeted temperature (1300°C). However, starting from the intermediate temperatures (800°C), the oxidation resistance of those alloys is the major obstacle to their use. In this work, two ways are investigated to improve this behavior: The first one aims at studying the effect of a refinement of microstructure synthesizing the Nbss-Nb5Si3 alloy both by fusion method and powder metallurgy route. It was shown that refining the microstructure led to decrease the oxidation kinetics at 1100°C and suppressed the catastrophic breakaway oxidation (pesting) typical of the Nb-Si alloys with coarse microstructure at 815°C. Furthermore, diffusion models were proposed to describe oxidation kinetics both at 815°C and 1100°C. The second part of this study is devoted to the development of silica forming protective coatings. Diffusion silicide coatings were manufactured by the halide activated pack-Cementation method. The various conditions of oxidation/corrosion tests (isothermal or cyclic, in air, air containing water vapor, CMAS silicate melt) allowed assessing and ranking the performance of coated systems

This master thesis deals with analysis of battery mass using x-ray spectral microanalysis. For the measurement two scanning electron microscopes equipped with energy dispersive x-ray spectroscopes were used. Appropriate examples were prepaired by standard method. Then elemental analysis was performed with changing conditions of measurement. Two programs were used for spectrums evaluation and in the end the size of errors was observed for every conditions.

No description available.