No description available.

Abstract There has been great interest in microgels as drug carriers within the pharmaceutical industry. This includes the use of amphiphilic drugs for treating conditions such as depression, allergies, and cancer. By loading adiphenine (ADP), pavatrine (PVT), and diphenhydramine (DPH) into macrogels and observing the release, this study seeks to investigate how amphiphilic drugs can be released from microgels. There is also an interest in how aggregation behavior may vary depending on the structural components. This study utilized small angle x-ray scattering (SAXS) along with UV analysis and the measuring of the binding isotherm to investigate micelle aggregation and aggregation number. Two of the drugs adiphenine and pavatrine, have similar structures with only one bond that differentiated them. The difference in rigidity provided different results in SAXS. Adiphenine has an aggregation number of 12, diphenhydramine has a number of 13, and pavatrine has a number of 37. In contrast to pavatrine, which did not exhibit a correlation peak, adiphenine and diphenhydramine showed correlation peaks. This indicates that none of them had an ordered phase structure but pavatrine displayed an even more disordered phase structure. Nevertheless, all three drugs were in equilibrium, and so a difference between adiphenine and pavatrine could be clearly distinguished. There were significant divergences between pavatrine and adiphenine despite not being able to determine binding isotherms for all three drugs. Based on this, they should be less stable than diphenhydramine. They have an ester linkage, while diphenhydramine doesn't. As a result, it was not possible to confirm how self-aggregation of adiphenine, pavatrine, and diphenhydramine impacts drug release. Despite this, differences in the rigidity of the structural form may lead amphiphilic drugs to exhibit different behaviour in gels. Keywords: Amphiphilic drugs, small angle x-ray scattering, macrogels, binding isotherm, CMC, self-aggregation, phase structure, micelles.

A new material for use as a proton exchange membrane in fuel cells has been developed: a blend of a perfluorocyclobutane-based block ionomer (S-PFCB) and Poly (vinylidene-co-hexafluoropropylene) (Kynar Flex, KF). This thesis details the work done thus far to characterize the morphology of this material, using small angle x-ray scattering, differential scanning calorimetry, atomic force micrscopy, and some other techniques to a lesser extent. Small angle x-ray scattering (SAXS) of pure S-PFCB showed a strong block copolymer- associated phase separation, on the order of 25 nm. Differential scanning Calorimetry (DSC) confirmed this finding. SAXS also revealed the presence of a peak representing individual ionic aggregates on the order of 3 nm. Finally, it was shown with DSC that no crystallinity develops in the S-PFCB block copolymer, while one of the blocks, known as 6F, crystallizes extensively. SAXS of incremental blend compositions of KF and S-PFCB revealed a steady increase in size of the block copolymer phase separation peak in SAXS, demonstrative of the miscibility of KF and the non-sulfonated 6F block of S-PFCB. Furthermore, this incremental study determined the scattering vector range relevant for comparing amounts of KF crystallinity. DSC of incremental blend compositions revealed two phases of KF crystallinity develops upon cooling a membrane, independent of cooling rate. Atomic force microscopy (AFM), small angle x-ray scattering (SAXS), and differential scanning calorimetry (DSC) corroborate to suggest a nonuniform morphology through the thickness of solution cast membranes. Also, the effect of different casting temperatures and after-casting anneals on morphology was assessed. Future work on this project involves morphological studies at various relative humidities and temperatures, as well as following up on discoveries already made. Finally, transmission electron micrscopy (TEM) should be performed to provide a visual analog, which will greatly help in developing an accurate morphological model. / Master of Science

No description available.

No description available.

No description available.

Polymer coatings on periodic nanostructures have facilitated advanced applications in various fields. The performance of these structures is intimately linked to their nanoscale characteristics. Smart polymer coatings responsive to environmental stimuli such as temperature, pH level, and ionic strength have found important uses in these applications. Therefore, to optimize their performance and improve their design, precise characterization techniques are essential for understanding the nanoscale properties of polymer coating, especially in response to stimuli and interactions with the surrounding medium. Due to their layered compositions, applying non-destructive measurement methods by X-ray/neutron scattering is optimal. These approaches offer unique insights into the structure, dynamics, and kinetics of polymeric coatings and interfaces. The caveat is that scattering methods require non-trivial data modeling, particularly in the case of periodic structures, which result in strong correlations between scattered beams. The dynamical theory (DT) model offers an exact model for interpreting off-specular signals from periodically structured surfaces and has been validated on substrates measured by neutron scattering. In this dissertation, we improved the model using a computational optimization approach that simultaneously fits specular and off-specular scattering signals and efficiently retrieves the three-dimensional sample profile with high precision. In addition, we extended this to the case of X-ray scattering. We applied this approach to characterize polymer brushes for nanofluidic applications and protein binding to modulated lipid membranes. This approach opens new possibilities in developing soft matter nanostructured substrates with desired properties for various applications. / Doctor of Philosophy / Polymer coatings on nanopatterned surfaces have recently facilitated advanced applications in various fields, particularly biotechnology. For example, multichannel surfaces coated with polymer can serve as nanofluidic devices for precise control of fluid flow in drug screening and detection of specific biomolecules. Moreover, polymer-coated nanopatterned surfaces, which possess similar properties to the extracellular matrix, provide excellent substrates for biological studies. The performance of these systems is closely tied to their nanoscale features, such as the thickness and conformation of the polymer layers. Therefore, high-resolution non-invasive nanoscale characterization techniques are essential for investigating these coatings to optimize their performance and enhance their design. X-ray/neutron scattering offers a non-destructive measurement method with unique capabilities in the nanoscale characterization of polymer coatings. However, scattering methods require non-trivial data modeling, particularly in the case of layered coatings on patterned surfaces. To tackle this challenge, we improved a dynamical theory (DT) model that allows for precise modeling of neutron and X-ray scattering signals from such systems. Using a computational optimization approach, the model enables efficient retrieval of the three-dimensional sample profile with high accuracy. We applied this approach to characterize polymer brushes for nanofluidic applications and protein binding to modulated lipid membranes. This methodology opens up new avenues for developing customizable, nanostructured substrates made from soft materials that possess tailored properties for a wide range of uses.

Small angle X-ray scattering (SAXS) has been widely used in polymer science to study the nano-scale morphology of various polymers. The data obtained from SAXS give information about sizes and shapes of macromolecules, characteristic distances of partially ordered materials, pore sizes, and so on. The understanding of these structural parameters is crucial in polymer science in that it will help to explain the origin of various properties of polymers, and guide design of future polymers with desired properties. We have been able to further develop the contrast variation method in SAXS to study the morphology of Nafion 117CS containing different alkali metal ions in solid state. Contrast variation allows one to manipulate scattering data to obtain desired morphological information. At room temperature, only the crystalline peak was found for Na⁺-form Nafion, while for Cs⁺-form Nafion only the ionic peak was observed. The utilization of one dimensional correlation function on different counterion forms of Nafion further demonstrates the necessity of contrast variation method in obtaining more detailed morphological information of Nafion. This separation of the ionic peak and the crystalline peak in Nafion provides a means to independently study the crystalline and ionic components without each other's effect, which could be further applied to other ionomer systems. We also designed time resolved SAXS experiments to study the morphological development during solution processing Nafion. As solvent was removed from Nafion dispersion through evaporation, solid-state morphological development occurred through a variety of processes including phase-inversion, aggregation of interacting species (e.g., ionic functionalities), and crystallization of backbone segments. To probe the real-time morphological development during membrane processing that accurately simulates industrial protocols, a unique sample cell has been constructed that allows for through-film synchrotron SAXS data acquisition during solvent evaporation and film formation. For the first time, this novel experiment allows for a complete analysis of structural evolution from solution/dispersion to solid-state film formation, and we were able to show that the crystallites within Nafion develop later than the formation of ionic domains, and they do not reside in the cylindrical particles, but are dispersed in solution/dispersion. Besides bulk morphology of Nafion, we have also performed Grazing Incident SAXS to study the surface morphology of Nafion. We were able to manipulate the surface morphology of Nafion via neutralizing H⁺-form Nafion with different large organic counterions, as well as annealing Nafion thin films under different temperatures. This not only allows to obtain more detailed information of the nano-structures in Nafion thin films, but also provides a means to achieve desired morphology for better fuel cell applications. We have also been able to study the polymer chain conformation in solution via measuring persistence length by utilizing solution SAXS. Different methods have been applied to study the SAXS profiles, and the measured persistence lengths for stilbene and styrenic alternating copolymers range from 2 to 6 nm, which characterizes these copolymers into a class of semi-rigid polymers. This study allows to elucidate the steric crowding effect on the chain stiffness of these polymers, which provides fundamental understanding of polymer chain behaviors in solution. Self-assembling in block copolymers has also been studied using SAXS. We established a morphological model for a multiblock copolymer used as a fuel cell material from General Motors®, and this morphological model could be used to explain the origins of the mechanical and transport properties of this material. Furthermore, several other block copolymers have been studied using SAXS, which showed interesting phase separated morphologies. These morphological data have been successfully applied to explain the origins of various properties of these block copolymers, which provide fundamental knowledge of structure-property relationship in block copolymers. / Ph. D.

yes / Controlling polymer thin-film morphology and crystallinity is crucial for a wide range of applications, particularly in thin-film organic electronic devices. In this work, the crystallization behavior of a model polymer, poly(ethylene oxide) (PEO), during spincoating is studied. PEO films were spun-cast from solvents possessing different polarities (chloroform, THF and methanol) and probed via in situ grazing incidence wide angle x-ray scattering. The crystallization behavior was found to follow the solvent polarity order (where chloroform < THF < methanol) rather than the solubility order (where THF > chloroform > methanol). When spun-cast from non-polar chloroform, crystallization largely followed Avrami kinetics, resulting in the formation of morphologies comprising large spherulites. PEO solutions cast from more polar solvents (THF and methanol) do not form well-defined highly crystalline morphologies and are largely amorphous with the presence of small crystalline regions. The difference in morphological development of PEO spun-cast from polar solvents is attributed to clustering phenomena that inhibit polymer crystallization. This work highlights the importance of considering individual components of polymer solubility, rather than simple total solubility, when designing processing routes for the generation of morphologies with optimum crystallinities or morphologies.

Human dental tissues are fascinating nano-structured hierarchical materials that combine organic and mineral phases in an intricate and ingenious way to obtain remarkable combinations of mechanical strength, thermal endurance, wear resistance and chemical stability. Attempts to imitate and emulate this performance have been made since time immemorial, in order to provide replacement (e.g. in dental prosthodontics) or to develop artificial materials with similar characteristics (e.g. light armour). The key objectives of the present project are to understand the structure-property relationships that underlie the integrity of natural materials, human dental tissues in particular, and the multi-scale architecture of mineralized tissues and its evolution under thermal treatment and mechanical loading. The final objective is to derive ideas for designing and manufacturing novel artificial materials serving biomimetic purposes. The objectives are achieved using the combination of a range of characterization techniques, with particular attention paid to the synchrotron X-ray scattering (Small- and Wide-Angle X-ray Scattering, SAXS and WAXS) and imaging techniques (Micro Computed Tomography), as well as microscopy techniques such as Environmental Scanning Electron Microscopy (ESEM), Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). Mechanical properties were characterized by nanoindentation and photoelasticity; and thermal analysis was carried out via thermogravimetric analysis (TGA). Experimental observations were critically examined and matched by advanced numerical simulation of the tissue under thermal-mechanical loading. SAXS and WAXS provided the initial basis for elucidating the structure-property relationships in human dentine and enamel through in situ experimentation. Four principal types of experiment were used to examine the thermal and mechanical behaviour of the hierarchical structure of human dental tissue and contributed to the Chapters of this thesis: (i) In situ elastic strain evolution under loading within the hydroxyapatite (HAp) in both dentine and enamel. An improved multi-scale Eshelby inclusion model was proposed taking into account the two-level hierarchical structure, and was validated against the experimental strain evaluation data. The achieved agreement indicates that the multi-scale model accurately reflects the structural arrangement of human dental tissue and its response to applied forces. (ii) The morphology of the dentine-enamel junction (DEJ) was examined by a range of techniques, including X-ray imaging and diffraction. The transition of mechanical properties across the DEJ was evaluated by the high resolution mapping and in situ compression measurement, followed by a brief description of the thermal behaviour of DEJ. The results show that DEJ is a narrow band of material with graded structure and mechanical properties, rather than a discrete interface. (iii) Further investigation regarding the thermo-mechanical structure-property relationships in human dental tissues was carried out by nanoindentation mapping of the nano-mechanical properties in ex situ thermally treated dental tissues. (iv) In order to understand the details of the thermal behaviour, in situ heat treatment was carried out on both human dental tissues and synthetic HAp crystallites. For the first time the in situ ultrastructural alteration of natural and synthetic HAp crystallites was captured in these experiments. The results presented in this thesis contribute to the fundamental understanding of the structure-property integrity mechanisms of natural materials, human dental tissues in particular. These results were reported in several first author publications in peer-reviewed journals, conference proceedings, and a book chapter.