Lactobacillus kunkeei is the most common and dominant bacterium in the honey stomach of honeybees. L. kunkeei has been isolated from honeybees all over the world. Genome sequencing has identified 5 genes for exceptionally large proteins in the genome of L. kunkeei. These proteins do not show any similarity to sequences of proteins with a known structure. These giant proteins all have a conserved region of 60 amino acids in their C-terminus. This conservation led to the hypothesis that the C-terminal domains of the giant proteins are important for their function with possibly a role in the attachment to the cell wall. In this study, a total of eight different constructs were made for two of these giant proteins. The boundaries for the constructs were determined based on bioinformatic predictions. The eight constructs all have different start positions and all end at the very C-terminal end of the protein. These constructs were cloned into an expression vector. One of the full-length giant protein was cloned into an expression vector as well.  The C-terminal constructs and the full-length proteins were recombinantly produced in Escherichia coli. Expression of six C-terminal constructs was observed and an attempt was made to purify two of the C-terminal constructs. Expression of the full-length giant protein was observed as well and purification was attempted. Neither the C-terminal constructs nor the full-length giant protein could be purified at full length. The results for the C-terminal constructs show that no folded C-terminal domain has been found for the giant proteins. A purified protein construct of the N-terminal of one of the giant proteins was available. This protein was analyzed using biophysical techniques. Circular dichroism was used to test the thermal stability. The construct did not refold after being thermally denatured. Circular dichroism measurements indicated that the N-terminal construct is composed of a mixture of α-helices and ß-sheets. Small-angle X-ray scattering data indicated that the N-terminal construct had an elongated shape with knot-like parts. Protein crystals have been obtained for the N-terminal construct and these will be analyzed using X-ray diffraction.

Perovskite solar cells have garnered significant interest thanks to the impressive rise of their efficiency over the last few years to a power conversion efficiency (PCE) of 25.2% despite being processable using cheap and potentially high-throughput solution coating techniques. Using the two-step conversion process high-quality perovskite films with high quality and uniformity can be produced, however, this process still needs a deeper and fundamental understanding. This thesis has shed light on the ink-to-solid conversion during the two-step solution process of hybrid perovskite formulations. We demonstrated that the conversion of PbI2 to perovskite is largely dictated by the state of the PbI2 precursor film in terms of its solvated states. We used several in situ diagnostic measurments such as grazing incidence wide-angle x-ray scattering (GIWAXS), quartz crystal microbalance with dissipation monitoring (QCM-D), and optical reflectance and absorbance all performed during spin coating, to monitor the nucleation and growth of crystalline phases, the mass deposition at the solid-liquid interface and the rigidity as well as the solution thinning behavior and the changes in optical absorbance of the precursor and perovskite. We compare conversion behaviors from different lead states by using methylammonium iodide (MAI), formamidinium iodide (FAI), and/or mixtures of halides (I, Br) and show that conversion can occur spontaneously and quite rapidly at room temperature without requiring further thermal annealing. We confirm this by demonstrating improvements in the morphology, microstructure and optoelectronics properties of the resulting perovskite films, as well as their impact on the PCE of solar cells using complimentary measurements such as scanning electron microscopy (SEM), X-ray diffraction (XRD) and with steady-state photoluminescence.

Narrow molecular weight fractions of Poly(ε-caprolactone) were successfully obtained using the successive precipitation fractionation technique with toluene/n-heptane as a solvent/nonsolvent pair. Calorimetric studies of the melting behavior of fractions that were crystallized either isothermally or under constant cooling rate conditions suggested that the isothermal crystallization of the samples should be used for a proper evaluation of the molecular weight dependence of the observed melting temperature and degree of crystallinity in PCL. The molecular weight and temperature dependence of the spherulitic growth rate of fractions was studied in the context of the Lauritzen-Hoffman two-phase model and the Strobl three-phase model of polymer crystallization. The zero-growth rate temperatures, determined from spherulitic growth rates using four different methods, are consistent with each other and increase with chain length. The concomitant increase in the apparent secondary nucleation constant was attributed to two factors. First, for longer chains there is an increase in the probability that crystalline stems belong to loose chain-folds, hence, an increase in fold surface free energy. It is speculated that the increase in loose folding and resulting decrease in crystallinity with increasing chain length are associated with the ester group registration requirement in PCL crystals. The second contribution to the apparent nucleation constant arises from chain friction associated with segmental transport across the melt/crystal interface. These factors were responsible for the much stronger chain length dependence of spherulitic growth rates at fixed undercooling observed here with PCL than previously reported for PE and PEO. In the case of PCL, the scaling exponent associated with the chain length dependence of spherulitic growth rates exceeds the upper theoretical bound of 2 predicted from the Brochard-DeGennes chain pullout model. Observation that zero-growth and equilibrium melting temperature values are identical with each other within the uncertainty of their determinations casts serious doubt on the validity of Strobl three-phase model. A novel method is proposed to determine the Porod constant necessary to extrapolate the small angle X-ray scattering intensity data to large scattering vectors. The one-dimensional correlation function determined using this Porod constant yielded the values of lamellar crystal thickness, which were similar to these estimated using the Hosemann-Bagchi Paracrystalline Lattice model. The temperature dependence of the lamellar crystal thickness was consistent with both LH and the Strobl model of polymer crystallization. However, in contrast to the predictions of Strobl’s model, the value of the mesomorph-to-crystal equilibrium transition temperature was very close to the zero-growth temperature. Moreover, the lateral block sizes (obtained using wide angle X-ray diffraction) and the lamellar thicknesses were not found to be controlled by the mesomorph-to-crystal equilibrium transition temperature. Hence, we concluded that the crystallization of PCL is not mediated by a mesophase. Metallocene-catalyzed linear low-density (m-LLDPE with 3.4 mol% 1-octene) and conventional low-density (LDPE) polyethylene blends of different compositions were investigated for their melt-state miscibility and concurrent crystallization tendency. Differential scanning calorimetric studies and morphological studies using atomic force microscopy confirm that these blends are miscible in the melt-state for all compositions. LDPE chains are found to crystallize concurrently with m-LLDPE chains during cooling in the m-LLDPE crystallization temperature range. While the extent of concurrent crystallization was found to be optimal in blends with highest m-LLDPE content studied, strong evidence was uncovered for the existence of a saturation effect in the concurrent crystallization behavior. This observation leads us to suggest that co-crystallization, rather than mere concurrent crystallization, of LDPE with m-LLDPE can indeed take place. Matching of the respective sequence length distributions in LDPE and m-LLDPE is suggested to control the extent of co-crystallization. / Ph. D.

Indiana University-Purdue University Indianapolis (IUPUI) / Large protein molecules are abundant in biological cells but are very difficult to study in physiological conditions due to molecular disorder. For large proteins, most structural information is obtained in crystalline states which can be achieved in certain conditions at very low temperature. X-ray and neutron crystallography methods can then be used for determination of crystalline structures at atomic level. However, in solution at room or physiological temperatures such highly resolved descriptions cannot be obtained except in very few cases. Scattering methods that can be used to study this type of structures at room temperature include small-angle x-ray and neutron scattering. These methods are used here to study two distinct proteins that are both classified as glycoproteins, which are a large class of proteins with diverse biological functions. In this study, two specific plasma glycoproteins were used: Fibrinogen (340 kDa) and Alpha 1-Antitrypsin or A1AT (52 kDa). These proteins have been chosen based on the fact that they have a propensity to form very large molecular aggregates due to their tendency to polymerize. One goal of this project is to show that for such complex structures, a combination of scattering methods that include SAXS, SANS, and DLS can address important structural and interaction questions despite the fact that atomic resolution cannot be obtained as in crystallography. A1AT protein has been shown to have protective roles of lung cells against emphysema, while fibrinogen is a major factor in the blood clotting process. A systematic approach to study these proteins interactions with lipid membranes and other proteins, using contrast-matching small-angle neutron scattering (SANS), small angle x-ray scattering (SAXS) and dynamic light scattering (DLS), is presented here. A series of structural reference points for each protein in solution were determined by performing measurements under osmotic stress controlled by the addition of polyethylene glycol-1,500 MW (PEG 1500) in the samples. Osmotic pressure changes the free energy of the molecular mixture and has consequences on the structure and the interaction of molecular aggregates. In particular, the measured radius of gyration (Rg) for A1AT shows a sharp structural transition when the concentration of PEG 1500 is between 33 wt% and 36 wt%. Similarly, a significant structural change was observed for fibrinogen when the concentration of PEG 1500 was above 40 wt%. This analysis is applied to a study of A1AT interacting with lipid membranes and to a study of fibrinogen polymerization in the presence of the enzyme thrombin, which catalyzes the formation of blood clots. The experimental approach presented here and the applications to specific questions show that an appropriate combination of scattering methods can produce useful information on the behavior and the interactions of large protein systems in physiological conditions despite the lower resolution compared to crystallography.

No description available.

No description available.

Novel highly functionalized hybrid organic-inorganic materials were synthesized by polycondensation of bis[3-(trimethoxysilyl)propyl]amine in presence of cationic and anionic surfactants. Reaction media strongly affected gelation time. Thus, in basic media gelation occurred immediately while acid increased gelation time. Material structures were studied by IR spectroscopy, porosimetry, XRD, and SAXS methods. In spite of the absence of an inorganic linker, obtained bridged silsesquioxanes had mesoporous structure. A material prepared in the presence of dodecylamine as a template had higher surface area and narrow pore size distribution while the use of sodium dodecylbenzene sulfate resulted in formation of mesopores with wide size ranges. Accessibility of surface amine groups in silsesquioxanes was studied for molecules of acidic nature and different sizes: HCl, CO2 and picric acid. High contents of accessible amine groups in these materials make them prospective adsorbents for post-combustion CO2 capture.

<p>This work studies the effect of dopamine (DA) and adenosine triphosphate (ATP) on lipid membranes using a number of complementary experimental methods. These methods include Dynamic Light Scattering to measure electrostatic surface potentials, solid-state Nuclear Magnetic Resonance to measure the degree of lipid acyl chain order, Electron Paramagnetic Resonance to measure changes in membrane viscosity, and X-ray diffuse scattering to measure structural and material parameters of lipid bilayers. It is shown that both DA and ATP have a measurable affinity to the lipid-water interface even in the absence of specialized biological receptors. These results are important for understanding the function of DA and ATP in cellular processes.</p>

No description available.

No description available.