Spelling suggestions: "subject:"andcalorimetry"" "subject:"nanocalorimetry""
1 |
Specific Heat Studies on the Charge-Density-Wave Transition of Lu5Ir4Si10 and Lu5Rh4Si10Hsu, Fung-Hsueh 29 June 2001 (has links)
Recently, the formation of charge density wave in 3D structure, Lu5Ir4Si10, had been observed in the X-ray diffraction experiment. At the same time, the transition in Lu5Ir4Si10 was thought to be first-order due to the spike-shaped anomaly in specific heat. The first-order transition usually accompanies with thermal hysteresis. In order to clarify this problem, we measure and analyze the specific heat result of Lu5Ir4Si10. As a matter of fact, we don¡¦t observe the thermal hysteresis behavior within the resolution of our apparatus, and we think the formation of CDW in Lu5Ir4Si10 is strong interchain coupling.
In addition, we also perform the resistivity, magnetic susceptibility and specific heat measurements under zero and external field on the isostructure component Lu5Rh4Si10 for comparison, which has also been thought to undergo a CDW transition. We indeed observe the thermal hysteresis behavior no matter on resistivity, susceptibility or on specific heat results, and this phenomenon doesn¡¦t have magnetic effects. The thermal hysteresis features in Lu5Rh4Si10 are attributed to the presence of metastable states due to the pinning of the CDW phase to impurities, and we also discuss some possibilities about it.
The specific heat measurement in our research is performed with an ac calorimetry, using chopped light as a heat source. The details of this technique are also discussed.
|
2 |
Phase transition studies of liquid crystal colloids with solvents and nano-solidsSigdel, Krishna P 21 April 2011 (has links)
Liquid crystals (LCs) are anisotropic fluids that exhibit numerous thermodynamically stable phases in between an isotropic liquid and a three-dimensionally ordered solid. In their simplest ordered phase, the nematic, LCs show orientational order due to molecular self assembly and at the same time maintaining fluid flow properties. In the smectic phase, they show both orientational and partial translational order characterized by a 1-d density wave. Liquid crystalline substances have been extensively studied due to their applications and as important physical models of self-assembly. The effect of the disorder and impurities on LC systems is an important and challenging problem to the fundamental understanding of phases ordering or self-assembly and continually attracts the attention of researchers. The disordered systems often display complex and rich phenomena, being the generalization of the pure (ideal) systems. Disorder can dramatically alter the physical properties of multi-component, composite systems. In particular, the effect of disorder on phase transitions is important as the disorder typically couples to the order parameter, which can be usefully described as a random local field that is conjugate to the order parameter. This is usually realized in systems with random inclusions in a phase ordering media, e.g., a colloidal dispersion of solids in a complex fluid. Another form of disorder is presented by dilution effects, which imposes instead the random breaking or weakening of intermolecular bonds or interactions responsible for the phase ordering. Exploring a good physical system representing random dilution effects in a controlled manner offers a physical probe to unresolved problems in the understanding of mesophasic order. This Dissertation presents a series of studies of dilution and different form of disorder effect on liquid crystal phase transitions. We have used high-resolution AC-calorimetry, dielectric spectroscopy as well as polarizing microscopy to characterize the effects of solvent such as hexane, acetone, decane, and nanomaterials such as multiwall carbon nanotubes and ferroelectric nanoparticles on the phase transitions of several liquid crystals. The liquid crystals of interest are: pentylcyanobiphenyl (5CB), octylcyanobiphenyl (8CB), and decylcyanobiphenyl (10CB). Studies have been carried out as a function of solvent, nanotube, and nanoparticles concentration and temperature spanning the isotropic to nematic (I-N), nematic to smectic-A (N-SmA), and isotropic to smectic-A (I-SmA) phase transitions.
|
3 |
SPECIFIC HEAT MEASUREMENTS ON STRONGLY CORRELATED ELECTRON SYSTEMSVaradarajan, Vijayalakshmi 01 January 2009 (has links)
Studies on strongly correlated electron systems over decades have allowed physicists to discover unusual properties such as spin density waves, ferromagnetic and antiferromagnetic states with unusual ordering of spins and orbitals, and Mott insulating states, to name a few.
In this thesis, the focus will be on the specific heat property of these materials exhibiting novel electronic ground states in the presence and absence of a field. The purpose of these measurements is to characterize the phase transitions into these states and the low energy excitations in these states. From measurements at the phase transitions, one can learn about the amount of order involved [i.e. entropy: ΔS = ∫Δc p/T dT], while measurements at low temperatures illuminate the excitation spectrum. In order to study the thermodynamic properties of the materials at their phase transitions, a high sensitive technique, ac-calorimetry was used. The ac-calorimeter, workhorse of our low dimensional materials lab, is based on modulating the power that heats the sample and measuring the temperature oscillations of the sample around its mean value. The in-house ac-calorimetry set up in our lab has the capability to produce a quasi-continuous readout of heat capacity as a function of temperature. A variety of single crystals were investigated using this technique and a few among them are discussed in my thesis.
Since many of the crystals that are studied by our group are magnetically active, it becomes useful for us to also study them in the presence of a moderate to high magnetic field. This motivated me to design, develop, and build a heat capacity probe that would enable us to study the crystals in the presence of non-zero magnetic fields and at low temperatures. The probe helped us not only to revisit some of the studied materials and to draw firm conclusions on the previous results but also is vital in exploring the untouched territory of novel materials at high magnetic fields (~ 14 T).
|
4 |
Thermal Conductivity of Nanowires, Nanotubes and Polymer-Nanotube CompositesPRADHAN, NIHAR R. 14 April 2010 (has links)
Ever rising power densities and smaller transistor dimensions are increasing the challenge of thermal management within integrated-circuit chips and their surrounding packaging. In addition, the need for sustainable energy has placed urgent emphasis on energy conversion. Thermoelectric phenomena, involving the conversion of heat to electrical current, provide a central focus for both needs. Specifically, there is a need to engineer materials or composites with low thermal conductivity and high electrical conductivity for energy conversion and the opposite for heat management. In this presentation, experimental results will be presented of the specific heat and thermal conductivity of cobalt nanowires (CoNW), carbon nanotubes (CNT) and polymer-carbon nanotubes, in various composite arrangements with our high precession Calorimetric technique. Due to the nature of these samples, boundary and defect scattering of phonons in nanomaterials can dominate. This scattering phenomena shows decreasing thermal conductivity in metal nanowires, turns to be good for thermoelectric application. For the CNT, and possibly due to the high volume per atom leading to ballistic phonon propagation, the observed thermal conductivity along the nanotube direction, which leads to manage the heat dissipation problem in integrated circuits (ICs) and microprocessors. The thermal conductivity of a single Single-Wall Carbon Nanotube (SWCNT) was found to be 6600 W/mK, theoretically, twice that of diamond. When such high thermal conductivity materials are dispersed in a low thermal conducting polymer (PMMA), the effective thermal conductivity and thermal stability of the composite can change dramatically. The experimental results show good agreement with theoretical model proposed by Nelsen, Hamilton, Crosse, Geometric, and Xue. The thermal relaxation phenomena such as glass transition temperature (Tg) and dynamics of the molecules in the polymer-nanotubes composites, changes significantly different than the pure polymers during thermal treatment and is one of the focusing point of this presentation. Liquid crystalline materials confined to restrictive nano-channels are of great interest in many potential applications of electro-optics and display technology. This part of the presentation investigates the unexplored phenomenon of the coating and filling of 8CB and 10CB liquid crystals inside ~200nm diameter Multi-Wall Carbon nanopipes. The phase transition characteristics of the confined liquid crystal films were studied using MDSC technique and will be the last part of this presentation.
|
5 |
THE DEVELOPMENT AND IMPLEMENTATION OF SYSTEMS TO STUDY THE PHYSICAL PROPERITES OF TANTALUM TRISULFIDE AND SMALL-MOLECULE ORGANIC SEMICONDUCTORSZhang, Hao 01 January 2015 (has links)
The charge-density-wave (CDW) material orthorhombic tantalum trisulfide (TaS3) is a quasi-one dimensional material that forms long ribbon shaped crystals, and exhibits unique physical behavior. We have measured the dependence of the hysteretic voltage-induced torsional strain (VITS) in TaS3, which was first discovered by Pokrovskii et. al. in 2007, on temperature and applied torque. Our experimental results shows that the application of torque to the crystal could also change the VITS time constant, magnitude, and sign. This suggests that the VITS is a consequence of residual torsional strain originally present in the sample which twists the polarizations of the CDW when voltage is applied. This polarization twist then results in torque on the crystal.
Another group of materials that may attract interest is that of small-molecule soluble organic semiconductors. Due to their assumed small phonon thermal conductivities and higher charge carrier mobilities, which will increase their seebeck coefficients with doping as compared to polymers, the small-molecule organic materials are promising for thermoelectric applications. In our experiments, we have measured the interlayer thermal conductivity of rubrene (C42H28), using ac-calorimetry. For rubrene, we find that the interlayer thermal conductivity, ≈ 0.7 mW/cm·K, is several times smaller than the (previously measured) in-plane value. Also, we have measured the interlayer and in-plane thermal conductivities of 6,13-bis((triisopropylsilyl)ethynyl) pentacene (TIPS-Pn). The in-plane value is comparable to that of organic metals with excellent π-orbital overlap. The interlayer (c-axis) thermal diffusivity is at least an order of magnitude larger than the in-plane, and this unusual anisotropy implies very strong dispersion of optical modes in the interlayer direction, presumably due to interactions between the silyl-containing side groups. Similar values for both in-plane and interlayer conductivities have been observed for several other functionalized pentacene semiconductors with related structures.
|
6 |
THERMAL CONDUCTIVITIES OF ORGANIC SEMICONDUCTORSYao, Yulong 01 January 2017 (has links)
Organic semiconductors have gained a lot of interest due to their ease of processing, low-cost and inherent mechanical flexibility. Although most of the research has been on their electronic and optical properties, knowledge of the thermal properties is important in the design of electronic devices as well. Our group has used ac-calorimetric techniques to measure both in-plane and transverse thermal conductivities of a variety of organic semiconductors including small-molecule crystals and polymer blends. For layered crystals composed of molecules with planar backbones and silylethynyl (or germylethynyl) sidegroups projecting between the layers, very high interplanar thermal conductivities have been observed, presumably implying that heat flows between layers mostly via interactions between librations on these sidegoups.
Since most organic semiconducting devices require materials in thin film rather than bulk crystal form, I have focused on using the “3ω- technique” to measure the thermal resistances of thin films of this class of organic semiconductors, including bis(triisopropylsilylethynyl) pentacene (TIPS-pn), bis(triethylsilylethynyl) anthradithiophene (TES-ADT), and difluoro bis(triethylsilylethynyl) anthradithiophene (diF-TES-ADT). For each material, several films of different thicknesses have been measured to separate the effects of intrinsic thermal conductivity from interface thermal resistance. For sublimed films of TIPS-pn and diF-TES-ADT, with thicknesses ranging from less than 100 nm to greater than 4 μm, the thermal conductivities are similar to those of polymers and over an order of magnitude smaller than those of single crystals, presumably reflecting the large reduction in phonon mean-free path due to disorder in the films. On the other hand, the thermal resistances of thin (≤ 205 nm) crystalline films of TES-ADT, prepared by vapor-annealing of spin-cast films, are dominated by their interface resistances, possibly due to dewetting of the film from the substrate during the annealing process.
|
7 |
Quenched Random Disorder Studies In Liquid Crystal + Aerosil DispersionsRoshi, Aleksander 27 April 2005 (has links)
This thesis presents a series of studies of quenched random disorder (QRD) on liquid crystals. We have used high-resolution AC-Calorimetry, high-resolution X-Ray Diffraction (XRD), X-Ray Intensity Fluctuation Spectroscopy (XIFS), Turbidity, Integrated Low-Angle Light Scattering (ILALS), as well as Polarizing Microscopy to characterize the effects of a nano-colloidal dispersions of aerosils in the phase transitions of several liquid crystals. The aerosil ($SIL$) is made of 70~AA~ diameter SiO$_{2}$ particles coated with hydroxyl (-OH) groups. The coating allows the $SIL$ particles to hydrogen-bond together, to form a very low density gel in an organic solvent. This provides the quenched random disorder. The liquid crystals of interest are: octyloxycyanobiphenyl ($8OCB$), 4-extit{n}-pentylphenylthiol-4'-extit{n}-octyloxybenzoate (ar{8}$S5), 4'-transbutyl-4-cyano-4-heptyl-bicyclohexane ($CCN47$), and octylcyanobiphenyl ($8CB$). Studies have been carried out as a function of aerosil concentration and temperature spanning the following phase transitions, Isotropic to Nematic (emph{I-N}), nematic to smectic-emph{A} (emph{N-SmA}), smectic-emph{A} to smectic-emph{C} (emph{SmA-SmC}), and crystallization.
|
Page generated in 0.052 seconds