The aim of thesis was to explore current approaches using for valuation trees on non – forest lands. Another aim was compare usual price and price assessed determined accordin to Valuation Decree. Methodics used for valution trees was valuation according to the valution regulation, Koch´s methodic and Methodic for valution tress growing out of forest.Market price wasfound out as a research at specialized subjects (trees numery, garden – tillages etc.) In practical part was evaluace price found of three pine trees and three leafy trees in three age phases. Discovered informations are commented and summarazied in final chapter.

This paper deals with the topic of numerical arrangement of fibers in a heat exchanger. The heat exchanger is scanned in an industrial tomograph and the acquired data are represented by the field of voxels. The method used in this paper is based on tracing the fiber fragments through the use of image analysis and the subsequent numerical connection of the fragments. The result is a set of fibers that are represented by points in the field through which they are passing.

The thesis approaches the problem of design of sewer network rehabilitation of urbanized area named Kamenná čtvrť. The thesis is divided into several parts. In the first part of the thesis there is the accompaying report, which describs characteristics of the area as a whole. The second part of the thesis is about describing each part of the network, clasification of defects according to the ČSN EN 13508 -2 and fothcoming TNV 75 6905 and photographs from network camera survey. In the third part of this thesis there is a chart with all defects located on the network. Also there is an evaluation of each part of network according to prepared TNV 75 6905. The fourth part of the thesis talks about evaluation of each part of the network as a whole. In the fifth part of the thesis we design possible choises of reahabilitation on the network. The sixth part of the thesis contains the economic aspects of possible alternatives and their comparsion. Last part of the thesis contains a hydrotechnical calculation, which means calculation of the current situation and the possible alternatives. There is an individual evaluation of the calculation and if its necessary optimizations of the network.

A steel construction, divided into two parts, was designed for the building object of a production block of a bio power plant. The two parts separate the boiler room and the engine room. Due to the specific load caused by the operation equipment, also several plateaus, consoles, footbridges and technological constructions were designed. A system of principal pillars HEB, transversely frame-connected with plane solid girders IPE, forms the hall construction. Pillars in rows 1 and 4 are rigidly jointed to foundations. A bearing structure of the roof deck is imposed on the girders. It is composed of a system of purlins – rolled profiles type UPE. The rigidity of the roof is secured by horizontal bracing between the purlins. The construction of the boiler room is attached to the construction of the engine room, which is formed of frame-connected principal pillars HEB in rows 4,7 and 8. The roof truss IPE is designed for 12 900 mm span between rows 4 and 7 and for 4 800 mm between rows 7 and 8. The spatial rigidity of the structure is not only secured by the rigid connection of pillars and foundation combined with the frame-connected roof rungs. It is mainly maintained thanks to the system of vertical wall bracings interacting with the horizontal bracing of the roof. Between the pillar rows B, C, D, E, F and G and 8 to 9 a construction of a substation is attached. In the engine room is situated technological structure. The construction is formed by supporting frames consisting of pillars type HEA, rungs type IPE and HEA and vertical bracing of rolled profiles. Pillars type HEA are connected to foundation using articulated connection. The rigidity of the structure is secured both ways by vertical bracing and by the connection of the plateau beams with the hall girders.

The main purpose of this thesis is the modification of the original flange gasket of the VVER1000 pressurizer manhole. Then the construction and function of the pressurizer itself is described, together with detailed calculations of the original and new modified gasket to meet the ČSN EN 1591 standard together with a description of the legislation that has to be followed in the calculations. The comparisons of both gasket types together with main conclusions are placed in the last section of this thesis.

The aim of this thesis is to address issues concerning the sealing of the lid for the primary collector within the steam generator (SG) of the nuclear power plant VVER 440. These steam generators are sealed in the original design by nickel rings. Modifying the existing method of sealing by a new type of sealing material, primarily from expanded graphite, can significantly reduce the pressure in the sealing surface and also stress in bolts and flanged joints. The new solution of sealing between the joint of collector and the lid should extend the life of joints and thus the nuclear and technical safety. The text is divided into the theoretical and computational part. A principle of the SG, the SG design, and a description of the joint and lid are mentioned in the theoretical part. The computational part shows calculations of the new joint, the original one, and comparison of both solutions in terms of technical and nuclear safety. The work contains drawing of the new joint.

This thesis presents a comparison of different methods of determining the default price for family house by using cost valuation method. Here are compared the default rates found in specific houses by itemized budget, calculating according to technical and economic indicator and obtained under the Ministry of Finance to implement certain provisions of Act No. 151/1997 Coll. Using charts and graphs shows the results for valuation individual houses and their variances. The aim is determine the price shares of construction and equipment of the itemized budget of houses created for this work and compare them to share price valuation in the annex to the Decree Ministry of Finance, perhaps to make an attention to differences or shortcomings in price share valuation announcement.

This diploma thesis concerns in the use of particular ways of pricing of properties such as family houses in the Miroslav Area. In its first part, the basic terms regarding the legal, economical nomenclature are specified and pricing. The next part of work discusses the legal regulations and necessary documentsneeded for property pricing. The main aim of the work is to describe particular ways of pricing of properties. The ways of pricing which are used to evaluate family houses in this work are going to be compared among each other as well. This particular ways of evaluation will be divided into two groups - pricing according to the price regulations and pricing according to the market. The practical part is concerned in pricing of six family houses whose prices are defined in the cost and comparativemanner according to the regulation and non-regulation. The next chapter concerns in the share of price of land in the final price of property with the use of Naegeli's method. In the conclusion, an analysis of the particular ways used for counting prices of family houses is carried out and it is specified how the aspect of 'work opportunity' is involved in the pricing of family house.

Diploma thesis „Assessment of the impal of distance from Litomyšl the usual price of selected houses“ aims todescribe themethodsusedto valuereal estate andselected methods,to maketheircomparisons. This particular ways of evaluation will be devided into pricing according to the price regulations and pricing according to the market. The practical part is concerned in pricing of five family houses whose prices are defined in the cost and comparativemanner according to the regulation and non-regulation (method of direct comparison). There are also valuation of land that make up the single family houses functional units, spell using methods and using the Naegeli´s method class position. In the conclusion is stated, to what extent is the price of selected houses affected by the distance from Litomyšl.

Master‘s Thesis „Analysic of factors influencing the market value of houses in the Svitavy district“ aims to assess which factors most affect the usual price and the impact on the usual price of houses has selected location. The next task is to determine the price of houses and cost comparison (regulation) method, including land prices, which are houses in a single functional unit. Their final prices are compared with each other, together with a description of the factors that most influence the price. Partial task is to assess the impact on the price of houses have a change in the zoning plan.