No description available.

Commercial aviation transportation has experienced an overwhelming growth over the years. However, this expansion has encountered an important barrier: noise. Several studies have shown that residents in these areas experience problems such as stress and sleep disturbance. These problems have translated into demands for a better quality of life from airport residents which in turn have translated into more stringent aircraft noise regulations. As a result, large amounts of resources have been diverted towards the improvement of existing noise attenuation technologies and the development of more effective ones. In terms of turbofan generated noise, the most widely used technology is that of absorbent materials or liners. In recent investigations Alonso et al. have combined Herschel/Quincke (HQ) tubes with liners. This combination has the potential of effectively controlling pure tones and broadband noise in inlet sections of modern turbofan engines. Since a comprehensive approach for engine noise reduction will involve both inlet and aft HQ-Liner systems, additional research efforts were needed to evaluate their performance at reducing aft fan radiation In the present work, a combination of traditional liners and Herschel/Quincke waveguide resonators for aft fan radiation control is proposed. A theoretical model is developed in order to predict noise reduction due to such systems. The newly developed tool was then utilized to design an HQ-liner that was installed and tested in the aft section of the NASA Active Noise Control Fan (ANCF) rig. This experimental data was utilized to prove the potential of these systems and to validate the mathematical model. Analytical predictions correlate well with experiments. The NASA ANCF rig is not representative of a real turbofan engine. In order to assess the behavior of HQ-Liners in a more realistic environment a new system was specifically designed for a generic turbofan engine and its performance analyzed. The sound field inside HQ tubes has been described assuming plane waves only. This assumption limits the model to frequencies below the tube first resonance. In order to overcome this limitation a new model accounting for higher order modes inside the tubes has been developed. / Ph. D.

Despite many advances in aviation noise control over the past 50 years, the industry is continually striving to reduce noise emissions. Turbofan engine acoustic liners are efficient attenuators of engine noise. Plasma actuators have been used as flow control devices in other settings and will now be studied as an enhancement for acoustic liners. A plasma actuator can excite oscillatory flow or a single direction (bias flow). Both flow types are studied as possible means to excite turbofan liners in order to improve the acoustic performance. Experiments revealed the oscillatory flow as the dominant factor in controlling resonator performance. The phase control of the actuator signal is an important parameter when dealing with the oscillatory flow. The actuator is first applied to a single resonator and then a set of six resonators. The experiments show that with the correct phase, the actuators improved the performance of a single resonator by 3 dB to 5 dB. The results for the array of actuators/resonators mirror the results of a single device. Beyond the improvements in performance, a number of other factors affect the usefulness of the plasma actuator technology in a turbofan environment. The ability of the actuator to produce plasma is susceptible to small imperfections in the device, and this property will likely be amplified in a perforated sheet with embedded actuators. Additional weight and energy consumed by the actuators is another factor to consider. Finally, plasma actuator operation produces ozone, so environmental effects deserve consideration as well. / Master of Science

Le besoin permanent de réduire le bruit des moteurs d’avion constitue un véritable engouement pour le développement de nouveaux traitements acoustiques. Les traitements traditionnels de type résonateur continuent d’être utilisé et permettent d’atténuer le son sur une bande de fréquence restreinte malgré l’augmentation du nombre de degré de liberté. Une alternative possible est l’utilisation de matériaux poreux, dit à réaction non localisée, qui permettent d’élargir le spectre d’atténuation. Ce rapport est consacré à la modélisation d’un traitement acoustique basé sur des matériaux poreux dans les conditions d’une manche d’entrée d’air de turboréacteur. Un modèle semi-analytique a donc été développé pour le calcul de la perte par transmission d’un conduit cylindrique traité en paroi et soumis à un écoulement uniforme. Une étude paramétrique a ensuite été réalisée afin de cibler les caractéristiques du traitement optimal pour une configuration aéronautique donnée. Des résultats expérimentaux sur une veine à échelle réduite sont également montrés et témoignent d’un certain accord avec le calcul. Enfin, dans le but d’approfondir les connaissances théoriques sur le problème, une étude préliminaire sur les effets d’une couche limite est réalisée et montre que sa prise en compte parait indispensable pour bien choisir les traitements acoustiques, surtout à haute fréquence. / The constant need to reduce noise emissions from aircraft engine leads to a real demand for developing new acoustic treatments. Conventional liners based on resonatorlike structure continue to be used and provide narrow-band attenuation in spite of an increasing degree of freedom. A possible alternative is the use of porous materials (nonlocally reacting), which offer the possibility of broadening the attenuation spectrum. This report deals with the modelling of an acoustic treatment based on porous materials for aeroengine nacelle inlet. A semi-analytical model is developed for predicting the transmission loss of a treated cylindrical duct containing uniform mean flow. Then, a parametrical study is carried out in order to target the optimal liner characteristics for a given turbofan duct application. Also, experiments have been performed on a small-scale duct and have shown agreement with the simulation. Finally, for a better theoretical unv derstanding of the problem, a preliminary study on the effect of a boundary layer is conducted and shows that its consideration seems to be essential for optimal choice of acoustic lining, espacially at high frequencies.

Les matériaux absorbants acoustiques, qui sont d’un intérêt stratégique en aéronautique pour la diminution passive du bruit des réacteurs d’avion, conduisent à une physique complexe où l’écoulement turbulent, des ondes acoustiques, et l’absorbant interagissent. Cette thèse porte sur la simulation de cette interaction dans le problème modèle d’un écoulement de canal turbulent avec des parois impédantes, par le biais de simulations numériques aux grandes échelles implicites, dans un contexte de calcul haute performance.Une étude est d’abord faite des grandes échelles dans un canal turbulent avec des parois rigides, en s’intéressant plus particulièrement à l’effet d’une faible compressibilité (Mach <3) sur les caractéristiques de ces échelles.Un canal turbulent avec une paroi de type impédance est ensuite simulé, avec une condition habituelle de périodicité dans le sens de l’écoulement. On observe que pour des faibles valeurs de la résistance et des fréquences de résonance basses, l’écoulement est instable, ce qui engendre une onde le long de l’absorbant, qui modifie la turbulence et augmente la trainée.Enfin, on se tourne vers une simulation de canal spatial en levant la condition de périodicité dans la direction de l’écoulement, ce qui permet d’introduire une onde acoustique en entrée de domaine. L’atténuation de l’onde dans l’écoulement turbulent est étudiée avec des parois rigides, puis un absorbant acoustique est introduit. Dans cette configuration plus réaliste, il est confirmé que l’écoulement peut devenir instable au bord amont de l’absorbant, ce qui empêche l’atténuation de l’onde acoustique incidente. / Acoustic liners are a key technology in aeronautics for the passive reduction of the noise generated by aircraft engines. They are employed in a complex flow scenario in which the acoustic waves, the turbulent flow, and the acoustic liner are interacting.During this thesis, in a context of high performance computing, a compressible Navier-Stokes solver has been developed to perform implicit large eddy simulations of a model problem of this interaction: a turbulent plane channel flow with one wall modeled as an impedance condition.As a preliminary step the wall-turbulence in rigid channel flows and associated large-scale motions are investigated. A straightforward algorithm to detect these flow features is developed and the effect of compressibility on the flow structures and their contribution to the drag are studied. Then, the interaction between the acoustic liner and turbulent flow is investigated assuming periodicity in the streamwise direction. It is shown that low resistance and low resonance frequency tend to trigger flow instability, which modifies the conventional wall-turbulence and also results in drag increase.Finally, the simulation of a spatial channel flow was addressed. In this case no periodicity is assumed and an acoustic wave can be injected at the inlet of the domain. The effect of turbulence on sound attenuation is studied without liner, before a liner is introduced on a part of the channel bottom wall. In this more realistic case, it is confirmed that low resistance acoustic liners trigger an instability at the leading edge of the liner, resulting in drag increase and excess noise generation.