The aerodynamic performance of low aspect ratio wings at low Reynolds numbers applicable to micro air vehicle design was studied in this thesis. There is an overall lack of data for this low Reynolds number range, particularly concerning details of local flow behavior along the span. Experiments were conducted to measure the local pressure distributions on a wing at various spanwise locations in a Reynolds number range 30000 < Re < 90000. The model wing consisted of numerous wing sections and had a rectangular planform with NACA0012 airfoil shape with aspect ratio of one. One wing section, with pressure ports at various chordwise locations, was placed at different spanwise locations on a wing to effectively obtain the local pressure information. Integration of the pressure distributions yielded the local lift coefficients. Comparison of the local lift distributions to optimal elliptic lift distribution was conducted. This comparison showed a sharply peaked lift distribution near the wing tip resulting in a drastic deviation from the equivalent elliptic lift distributions predicted by the finite wing theory. The local lift distributions were further analyzed to determine the total lift coefficients vs angle of attack curves, span efficiency factors and the induced drag coefficients. Measured span efficiency factors, which were lower than predictions of the elliptic wing theory, can be understood by studying deviations of measured lift from the elliptic lift distribution. We conclude that elliptic wing theory is not sufficient to predict these aerodynamic performance parameters. Overall, these local measurements provided a better understanding of the low Reynolds number aerodynamics of the low aspect ratio wings.

Au cours des dernières décennies, la possibilité d’exploiter les capacités de vol exceptionnelles des insectes a été à l’origine de nombreuses recherches sur l’élaboration de nano-véhicules aériens (NAVs) à ailes battantes. Cependant, lors de la conception de tels prototypes, les chercheurs doivent analyser une vaste gamme de solutions liées à la grande diversité des insectes volants pour identifier les fonctionnalités et les paramètres adaptés à leurs besoins. Afin d’alléger cette tâche, le but de ce travail est de développer un outil permettant à la fois d’examiner le comportement cinématique et énergétique d’un nano-véhicule aérien à ailes flexibles résonantes, et donc d'évaluer son efficacité. Cet objectif reste néanmoins extrêmement difficile à atteindre car il concerne des objets de très petites tailles. Aussi, nous avons choisi tout d’abord de travailler sur un micro-véhicule aérien (MAV) à ailes battantes. Il s’agit avant tout de valider l’outil de modélisation à travers une comparaison systématique des simulations avec des résultats expérimentaux effectués lors de l’actionnement des ailes, puis au cours du décollage et du vol stationnaire du prototype. Une partie des connaissances et expériences acquises pourra ensuite être utilisée afin de mieux comprendre le fonctionnement et identifier la distribution d'énergie au sein du NAV. Bien que les deux véhicules s’inspirent directement de la cinématique des ailes d'insectes, les mécanismes d'actionnement des ailes artificielles des deux prototypes ne sont pas les mêmes en raison de la différence de taille. Comme le NAV est plus petit, ces ailes ont un mouvement de battement à une fréquence plus élevée que celles du MAV, à l’instar de ce qui existe dans la nature. En conséquence, lorsque l’on passe du MAV au NAV, le mécanisme d’actionnement des ailes doit être adapté et cette différence nécessite d’une part, de revoir la conception, l'approche de modélisation et le processus d'optimisation, et d’autre part, de modifier le procédé de fabrication. Une fois ces améliorations apportées, nous avons obtenu des résultats de simulations en accord avec les tests expérimentaux. Le principal résultat de ce travail concerne l’obtention pour les deux prototypes, le MAV et le NAV, d’une cinématique appropriée des ailes, qui conduit à une force de portance équivalente au poids. Nous avons d’ailleurs démontré que le MAV était capable de décoller et d’avoir un vol stationnaire stable selon l’axe vertical. En tirant parti des modèles basés sur le langage Bond Graph, il est également possible d'évaluer les performances énergétiques de ces prototypes en fonction de la dynamique de l'aile. En conclusion, cette étude contribue à la définition des paramètres essentiels à prendre en compte lors de la conception et l'optimisation énergétique de micro et nano-véhicules à ailes battantes. / In recent decades, the prospect of exploiting the exceptional flying capacities of insects has prompted much research on the elaboration of flapping-wing nano air vehicles (FWNAV). However, when designing such a prototype, designers have to wade through a vast array of design solutions that reflects the wide variety of flying insects to identify the correct combination of parameters to meet their requirements. To alleviate this burden, the purpose of this work is to develop a suitable tool to analyze the kinematic and power behavior of a resonant flexible-wing nano air vehicle. The key issue is evaluating its efficiency. However, this ultimate objective is extremely challenging as it is applied to the smallest flexible FWNAV. However, in this work, we worked first with a flapping-wing micro air vehicle (FWMAV) in order to have a tool for the simulation and experimentation of wing actuation, take-off and hovering. Some of the knowledge and experience acquired will then be transferred to better understand how our FWNAV works and identify the energy, power distribution. Although both of the vehicles employ the insect wing kinematics, their wings actuation mechanisms are not the same due to their sizes difference. Since the FWNAV is smaller, their wings flap at a higher frequency than the FWMAV as inspired by nature. As a consequence, from MAV to NAV, the wing actuation mechanism must be changed. Throughout this work, it can be seen clearly that this difference affects the whole vehicles development including the design, the manufacturing method, the modeling approach and the optimizing process. It has been demonstrated that the simulations are in good correlation with the experimental tests. The main result of this work is the proper wing kinematics of both FWMAV and FWNAV which leads to a lift to the weight ratio bigger and equal to one respectively. The FWMAV is even success to take-off and vertically stable hover. Moreover, taking advantage of the Bond Graph-based models, the evolution power according to the wing dynamic and the efficiency of the subsystem can be evaluated. In conclusion, this study shows the key parameters for designing and optimizing efficiency and the lift generated for two flapping wing vehicles in different size regimes.

In this thesis, an unmanned air vehicle (UAV) is used to develop a prototype base test platform for flight testing of new control algorithms and avionics for advanced UAV system development applications. A control system that holds the UAV at a fixed altitude above the ground is designed and flight tested. Only the longitudinal motion of the UAV is considered during the controller design, hence its lateral motions are controlled manually by a remote control unit from the ground. UAV&amp / #8217 / s altitude with respect to the mean sea level and position are obtained by an onboard global positioning system (GPS) and this information is transmitted to the ground computer via radio frequency (RF) communication modules. The altitude of the UAV above the ground is calculated by using the digital terrain elevation data (DTED). A controller is designed and its gains are tuned to maintain this flight altitude at a desired value by using the mathematical model developed to represent the longitudinal dynamics of the UAV. Input signals generated by the controller for elevator deflections are transmitted back to the UAV via RF communication modules to drive onboard servomotors to generate desired elevator deflections. All controller computations and RF communications are handled by a MATLAB&reg / based platform on a ground computer. UAV flight tests are carried out at two different autopilot modes / namely, mean sea level (MSL) altitude hold mode and above ground level (AGL) altitude hold mode. The developed platform worked properly during flight tests and proved to be reliable in almost every condition. Moreover, the designed controller system is demonstrated to be effective and it fulfills the requirements.

In this thesis, a test platform based on real-time facilities and embedded software is designed to verify the performance of a controller model in real time. By the help of this platform, design errors can be detected earlier and possible problems can be solved cost-effectively without interrupting the development process. An unmanned combat air vehicle (UCAV) model is taken as a plant model due to its importance in current and future military operations. Among several autopilot modes, the altitude hold mode is selected since it is an important pilot-relief mode and widely used in aviation. A discrete PID controller is designed in MATLAB/Simulink environment for using in verification studies. To control the dynamic system in wide range, a gain scheduling is employed where the altitude and velocity are taken as scheduling variables. Codes for plant and controller model are obtained by using real time workshop embedded coder (RTWEC) and downloaded to two separate computers, in which xPC kernel and VxWorks operating system are run, respectively. A set of flight test scenarios are generated in Simulink environment. They are analyzed, discussed, and then some of them are picked up to verify the platform. These test scenarios are run in the setup and their results are compared with the ones obtained in Simulink environment. The reusability of the platform is verified by using a commercial aircraft, Boeing 747, and its controller models. The test results obtained in the setup and in Simulink environment are presented and discussed.

Spacecloth design and development is vital and crucial in Radar Absorbing Materials (RAM) for achieving Low Observability in an Aircraft or an Unmanned Air Vehicle(UAV). The RAM design translates into the spacecloth design. The spacecloths form the constituent layers in a broadband Jaumann absorber in which case they have to be designed for various values of surface resistivity. The design specifications of spacecloth(s) in RAMS is well understood and documented in literature. But the design of spacecloth hitherto, has been the domain of materials' scientists wherein the specified properties of the spacecloth are achieved by an iterative, trial and error process, by mixing various constituents in different proportions to get the design specified surface resistivity in the final end-product. In an effort to bridge this gap, a novel spacecloth for RAM applications is proposed in the thesis. It is proposed that a repetitive geometrical grid network of chip resistors simulates spacecloth. The sheet resistivity of the spacecloth is derived by analyzing various geometries like square, rectangle, triangle and hexagonal grids. The transmission and reflection loss for the chip resistor spacecloth is derived. The design of chip resistor spacecloths for operation at S and C bands is given followed by experimental verification using waveguide simulator experiments. Numerical study of multilayer RAM has been carried out with exponential taper variation of surface resistivities for constituent spacecloth layers and design curves are given for multilayer RAM both for normal and oblique incidence for TE and TM polarizations.

La motivation qui a initié le projet de recherche ANR « Démonstrateur Gun Launched Micro Air Vehicle » est le besoin d’avoir un engin portatif qui permettrait d’obtenir rapidement des images d’une zone d’intérêt située à quelques centaines de mètres, avec la possibilité de pouvoir observer l’intérieur des bâtiments à travers leurs fenêtres ou en allant les explorer directement. Pour répondre à ce besoin, l’Institut franco-allemand de recherche de St Louis a eu l’idée de lancer un minidrone hélicoptère avec un canon. Le GLMAV, sous la forme d’un projectile, est lancé à partir d‘un tube portable à une distance de 500 m et une altitude de 100 m, où il pourra commencer à transmettre des images de la zone à observer. L’utilisation d’un système hybride projectile/minidrone a deux principaux avantages : cela permet d’augmenter l’autonomie du drone, et les premières images de la zone d’intérêt sont obtenues très rapidement. Au cours de cette thèse, nous nous sommes intéressés à la phase de transition, passer d’un projectile à un mini hélicoptère. Un modèle aérodynamique détaillé du GLMAV a été obtenu sur toute son enveloppe de vol. En prenant en compte les difficultés rencontrées lors de la phase de transition (perturbations des capteurs dues à l’accélération de 2500g au lancement, conditions initiales variables), nous avons développé une stratégie de commande, et une loi de commande en vitesse basée sur la technique du backstepping. Cette stratégie de commande a été validée en simulation. La loi de commande en orientation a été validée sur le prototype du GLMAV. Des travaux sur le flux optique, pour obtenir les vitesses latérales, ont été commencés. / The motivation that initiated the ANR research project "Démonstrateur Gun Launched Micro Air Vehicle" is the need to have a portable system which would permi tto quickly obtain images of an zone of interest placed at some hundred of meters, with the possibility to observe inside buildings either by their windows or by going inside them.To answer this need, the French-German Research Institute of St Louis got the idea o fusing a gun launched rotorcraft-MAV. The GLMAV, in its projectile form, is launched from a portable launching tube to a distance of 500m and a height of 100m, where it will collect and transmit visual information from the scene. The use of a projectile/rotorcraft-MAV hybrid system has two main advantages : it allows extending the MAV range,and the first images of the interest zone are obtained very quickly. During this PhD, we studied the transition phase, the passage from a projectile to a rotorcraft-MAV. A detailed aerodynamic model of the GLMAV has been obtained over his whole flight envelope. Taking into account the difficulties encountered during the transition phase (perturbation of the sensors caused by the 2500g acceleration at the launch, varying initial conditions),we developed a control strategy, and a velocity control law based on the backstepping methodology. This control strategy has been validated in simulation. The attitude control law has been validated on the GLMAV prototype. Studies on optical flow, to obtain the lateral velocities of the GLMAV, have been started.

Ce travail de thèse s'inscrit dans le contexte des drones vise à réaliser à terme un Nano-dispositif volant (Nano Aerial Vehicle) capable d'imiter le vol des insectes. Ce mode de locomotion est privilégié car il présente des caractéristiques très adaptées au vol en milieu confiné. La solution proposée consiste à développer un drone de la taille d'un insecte s'appuyant sur des ailes vibrantes pour se mouvoir et à utiliser les technologies MEMS pour répondre aux problématiques de fabrication et de réduction d'échelle. La réussite d'un tel projet soulève néanmoins de nombreux défis scientifiques et technologiques, en particulier, les aspects aéro-élastiques des ailes et l'autonomie du drone. Pour répondre à ces défis, nous proposons dans un premier temps de mettre en œuvre des concepts comme la résonance et la torsion passive sur des prototypes en polymère (SU-8) réalisés par photolithographie. Dans un second temps, les différents composants de la chaîne de puissance sont optimisés, notamment l'actionneur électromagnétique, la liaison et les ailes de manière à maximiser la force de portance générée. Suite à ces améliorations, nous démontrons de façon expérimentale que le prototype était capable non seulement de reproduire une cinématique complexe mais également de compenser 75% de son poids. / This manuscript reports a work which aims to develop a tiny flying robots inspired by natural flyers. Our main objective is to devise a flying robot mimicking insects in terms of kinematics and scale using MEMS technologies in order to answer the scale challenges: the large-scale manufacturing and the system's small scale. The success this project faces different challenges such as aeroelastic aspects of wings and drone autonomy.In this work we propose the use of original concepts like resonance and passive torsion of the wings which are implemented on all-polymer prototypes obtained using a micromachining SU-8 photoresist process. In order to achieve a better efficiency of the prototype, each element of the energy transduction has been carefully examined and optimized. Especially, the actuation, the transmission and the wings in order to increase the lift. These improvements demonstrate experimentally that the prototype is able to produce a complex kinematic and compensate 75 % of its weight.

No description available.

Furthering our understanding of the physics of flapping flight has the potential to benefit the field of micro air vehicles. Advancements in micro air vehicles can benefit applications such as surveillance, reconnaissance, and search and rescue. In this research, flapping kinematics of a ladybug was explored using a direct linear transformation. A flapping mechanism design is presented that was capable of executing ladybug or other species-specific kinematics. The mechanism was based on a differential gear design, had two wings, and could flap in harsh environments. This mechanism served as a test bed for force analysis and optimization studies. The first study was based on a Box-Behnken screening design to explore wing kinematic parameter design space and manually search in the direction of flapping kinematics that optimized the objective of maximum combined lift and thrust. The second study used a Box-Behnken screening design to build a response surface. Using gradient-based techniques, this surface was optimized for maximum combined lift and thrust. Box-Behnken design coupled with response surface methodology was an efficient method for exploring the mechanism force response. Both methods for optimization were capable of successfully improving lift and thrust force outputs. The incorporation of the results of these studies will aid in the design of more efficient micro air vehicles and with the ultimate goal of leading to a better understanding of flapping wing aerodynamics and the development of aerodynamic models.

Coalitions are collections of agents that join together to solve a common problem that either cannot be solved individually or can be solved more efficiently as a group. Each individual agent has capabilities that can benefit the group when working together as a coalition. Typically, individual capabilities are joined together in an additive way when forming a coalition. This work will introduce a new operator that is used when combining capabilities, and suggest that the behavior of the operator is contextual, depending on the nature of the capability itself. This work considers six different capabilities of Unmanned Air Vehicles (UAV) and determines the nature of the new operator in the context of each capability as coalitions (squadrons) of UAVs are formed. Coalitions are formed using three different search algorithms, both with and without heuristics: Depth-First, Depth-First Iterative Deepening, and Genetic Algorithm (GA). The effectiveness of each algorithm is evaluated. Multi agent-based UAV simulation software was developed and used to test the ideas presented. In addition to coalition formation, the software aims to address additional multi-agent issues such as agent identity, mutability, and communication as applied to UAV systems, in a realistic simulated environment. Social potential fields provide a means of modeling a clustering attractive force at the same time as a collision-avoiding repulsive force, and are used by the simulation to maintain aircraft position relative to other UAVs.