Spelling suggestions: "subject:"allow development""
1 |
Development of Al-Mg-Si aluminium alloys for automobile applicationsXie, Yun January 1999 (has links)
No description available.
|
2 |
Microstructure and mechanical properties of ductile die-cast Al-Mg-Si-Mn alloysWatson, Douglas January 2015 (has links)
Aluminium alloys have been seen a dramatic increase in transport manufacturing in past two decades. This is primarily driven by the achievement of effective weight-savings, increased vehicle fuel efficiency and reduced CO2 emissions in transport. One of the significant progresses in most recent years has been in the application of aluminium-intensive car body structure, in which the manufacturing of thin wall castings with improved ductility is one of the critical issues. High pressure die casting (HPDC) is a fast and economical near-net shape manufacturing method to produce thin wall components. Therefore the application of HPDC process to make thin wall structural components for aluminium-intensive car body structure is one of the most challenges in recent development. However, the currently available die cast aluminium alloys are unable to fulfil this requirement because of the insufficient ductility, which is essential for joining castings with sheets and extruded parts. This has become critical in further development and extensive acceptance in car manufacturing industry. Generally, the mechanical properties of die castings are determined by alloy composition, defect levels and microstructure in the castings. In the present study, the significant achievement is the development of Al-Mg-Si-Mn alloy for HPDC process to provide improved ductility in die castings in order to satisfy the requirement of mechanical properties, in particular ductility for the application in automotive body structure. Starting from the thermodynamic analysis and CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) modelling of Al-Mg-Si system for solidification and phase formation, the alloy composition was optimised using international standard tensile samples to review the effect of various alloying elements on the mechanical properties. Another achievement is the understanding of the solidification and microstructural evolution, the relationship between the microstructure and mechanical properties, and the strengthening mechanisms in the developed alloy. The solidification behaviour in the shot sleeve and in the die cavity was examined for the formation of the primary α-Al phase, eutectic Al-Mg2Si phases in the alloy. The morphology, size and size distribution of the primary α-Al phase were characterised under different solidification conditions. The growth morphology of the primary α-Al phase formed in the shot sleeve and in the die cavity was analysed using the Mullins-Sekerka instability theory and the growth rate of eutectic Al-Mg2Si phases during solidification was calculated using Jackson-Hunt theory. Still another achievement is the study of the effect of Mn and Fe on the morphology, size and distribution of various Fe-rich compounds in the Al-Mg-Si alloy produced by HPDC process. The assessment was associated with the mechanical properties of yield strength, ultimate tensile strength and elongation with different Fe and Mn contents. CALPHAD modelling of multi-component Al-Mg-Si-Mn-Fe and Al-Mg-Si-Fe systems was studied to find out the effect of Fe impurity in the Al-Mg-Si alloy. The precise accumulation of iron during HPDC using fully recycled materials was examined to predict the maximum cycles to produce castings with required mechanical properties. The strengthening mechanism and the relationship between the microstructure and mechanical properties are explored in the alloy made by secondary materials. Furthermore, the effect of nickel on the microstructure and mechanical properties of the die-cast Al-Mg-Si-Mn alloy was also studied in association with the formation of Ni-rich intermetallics during solidification in the die-cast Al-Mg-Si-Mn alloy containing different Ni contents. The final achievement is the understanding of the repeatability of die castings made by the new alloy with industrial scale components. The tensile properties of standard samples that were obtained directly from HPDC process and made by the machined die castings at different locations were further assessed for the reproducibility of casting components made by the Al-Mg-Si-Mn alloy. The distributions of yield strength, ultimate tensile strength and elongation of the tensile samples were analysed by the average values with standard deviations and by the Weibull statistical model with three parameters. The correlations between the mechanical properties and the microstructural features, porosity levels and fracture morphology were investigated for the different types of samples. It was found that three-parameter Weibull analysis was capable of analysing the reproducibility of die cast components and the scattering of tensile properties was mainly due to the presence of porosity and non-uniform microstructure in the die-castings.
|
3 |
COMBINATORIAL SCREENING APPROACH IN DEVELOPING NON-EQUIATOMIC HIGH ENTROPY ALLOYSAkbari, Azin 01 January 2018 (has links)
High entropy alloys (HEA) are a relatively new group of alloys first introduced in 2004. They usually contain 5 to 6 different principle elements. Each of these elements comprise 5-35 at. % of the chemical composition of the alloy. There is a growing interest in the research community about the development of these alloys as well as their engineering applications. Some HEAs have interesting properties that have made them well suited for higher temperature applications, particularly refractory uses, while some have been shown to maintain their mechanical properties even at cryogenic temperatures.
Initially, the HEA research was focused on developing alloys with equiatomic compositions as it was believed that the single phase HEA would only form at such composition ratios. However, further research have found multiple HEAs with non-equiatomic chemical compositions. A major question that needs to be answered at this point is how to identify these non-equiatomic single phase alloy systems. Unlike the conventional alloys, the HEAs do not have a base element as a solvent, which complicates the identification of new alloy systems via conventional development techniques. To find a potential HEA, alloy development techniques of both exploratory and computational natures are being conducted within the community. Even though multiple HEAs have been successfully identified and fabricated by these techniques, in most cases they require extensive experimental data and are relatively time consuming and expensive. This study proposes a thin film combinatorial approach as a more efficient experimental method in developing new HEA alloy systems.
In order to study HEA systems with different crystal structures, nominal HEA compositions were selected, including: CoFeMnNiCu in order to achieve face centered cubic (FCC) HEA, OsRuWMoRe to obtain hexagonal closed packed (HCP) and VNbMoTaW in an attempt to form a body centered cubic (BCC) crystal structure. Thin film samples were fabricated by simultaneous magnetron sputtering of the elements onto silicon wafer substrates. The arrangement of the sputtering targets yielded a chemical composition gradient in the films which ultimately resulted in the formation of various phases. Some of these phases exhibited the desired single-phase HEA, albeit with non-equiatomic chemical compositions. Bulk samples of the identified HEA compositions were prepared by arc melting mixtures of the metals. Microstructure of both thin film samples and bulk samples were characterized via scanning electron microscopy (SEM), focused ion beam (FIB) and energy dispersive x-ray spectroscopy (EDX). The crystal structures of the samples were studied by X-ray diffraction (XRD) and electron backscattered diffraction (EBSD) technique. Applying nano-indentation technique, the mechanical properties of some of the samples were screened over the composition gradient as well.
By applying this combinatorial thin film approach, single-phase FCC, HCP and BCC HEAs were detected and successfully produced in bulk form. Additionally, screening the properties of the compositionally gradient thin films, as well as their chemical composition and crystal structure, provided a thorough understanding of the phase space. This experimental approach proved to be more efficient in identifying new alloy systems than conventional exploratory development methods.
|
4 |
Quantitative Metallography, Optimization of HVHPC Process and Modelling Solute Homogenization During Solutionizing of Al-4Zn-1Mg-1.2Fe-0.1Ti Alloywu, chufan January 2019 (has links)
High pressure die casting (HPDC) is both a cost-efficient and high throughput method for making near-net shape castings. 7xxx series aluminum alloys are excellent candidates for manufacturing structural components for significant light-weighting opportunities in the automotive industry. This project explores the development of a new 7xxx series aluminum alloy with iron additions to improve castability. The main objective of this project is to develop an optimized heat treatment process for the new Al-Zn-Mg-Fe alloy to achieve solute homogenization in the primary Al grains.
The rationale behind adding iron as an alloying element was presented, as well as an analysis of the Al-Fe intermetallic phases to show their mitigating effects on hot tearing.
A detailed analysis of the casting quality was carried out, including detailed microstructural analyses of defects and defect-free castings, correlating process parameters, shot profiles, uniaxial tensile properties, and fractography. Improvements on casting conditions and parameters were suggested.
Solution heat treatments were carried out between 0.25 and 24 hours and quenched with forced air. Bulk hardness measurements were obtained following solution heat treatment to determine the arrest times for the precipitation reactions during natural aging. The uniaxial tensile properties of the alloy in the F- and T4-tempers were presented. Microstructural analyses of the alloy were carried out by optical and electron microscopy (SEM), including phase identification, phase fraction, average grain size, and distribution.
A predictive model for the homogenization of the solutes in the Al matrix was developed using a one-dimensional diffusion model with spherical geometry, and a MATLAB code was developed to time for complete homogenization. Electron-dispersive X-ray spectroscopy (EDX) line scans were carried out on the F and T4 samples (0.25-2h) and the concentration profiles of Zn and Mg (the diffusing solutes) were extracted and analyzed. The models were verified and validated with experiment data. / Thesis / Master of Applied Science (MASc)
|
5 |
Development of Mg-Al-Sn and Mg-Al-Sn-Si Alloys and Optimization of Super Vacuum Die Casting Process for Lightweight ApplicationsKlarner, Andrew Daniel 01 June 2018 (has links)
No description available.
|
6 |
Initial Weldability of High Entropy Alloys for High Temperature ApplicationsMartin, Alexander Charles 28 August 2019 (has links)
No description available.
|
Page generated in 0.0767 seconds