The aluminum oxide growth rate for aluminum protected with 2.4 nm of aluminum fluoride has been determined. We show that a 2.4 nm aluminum fluoride layer does not prevent aluminum from oxidation but does significantly retard the oxide growth – decreasing the oxide layer thickness from 1 nm in less than an hour to 0.9 nm over 116 hours. Additionally, the optical constants for aluminum oxide growing under an aluminum fluoride barrier layer have been determined – showing an increase in absorption at high energies for Al2O3 forming at room temperature as compared to highly ordered Al2O3 formed at high temperatures.

ABSTRACT AN INVESTIGATION OF THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF TRI-CALCIUM PHOSPHATES DOPED WITH ALUMINUM AND FLUORIDE IONS Tahmasebifar, Aydin M. Sc., Department of Engineering Sciences Supervisor: Assoc. Prof. Dr. Zafer Evis August / 88 Pages The aim of this study was to investigate the microstructure and mechanical properties of pure tricalcium phosphate (TCP) and tricalcium phosphates doped with aluminum (Al3+) and fluoride (F-) ions at different compositions. TCP was synthesized via precipitation method and sintered at 1100

Die feste nichtkristalline Lewis-Säure Aluminiumchlorofluorid (ACF, AlCl(x)F(3-x), x = 0.05 .. 0.3) hat die höchste bisher bekannte Lewis-Acidität aller heterogenen Katalysatoren. Sie erreicht die Stärke von Antimonpentafluorid SbF5 und übertrifft sie in manchen Fällen sogar. In dieser Arbeit wurden die Bulk-Struktur des ACF und der sehr ähnlichen Verbindung Aluminiumbromofluorid (ABF) mittels IR-, ESR-, NMR- und Röntgenabsorptionsspektroskopie studiert. Die Oberfläche der Verbindungen wurde durch die Adsorption von Gasen bei niedrigen Temperaturen untersucht, sowie durch IR- und ESR-Spektroskopie adsorbierter Sondenmoleküle. Das thermische Verhalten dieser nichtkristallinen Verbindungen wurde mittels DTA verfolgt. Die Lewis-Acidität kleiner Modellverbindungen wurde NMR-spektroskopisch und mit ab initio Methoden untersucht. Alle Daten wurden mit denen der gut charakterisierten und bekannten Modifikationen des Aluminiumfluorids (AlF3) verglichen. Die kombinierten Ergebnisse der Messungen an beiden festen Phasen erlauben die Entwicklung eines Strukturmodells für diese Verbindungen, das die meisten spektroskopischen Daten und die außergewöhnlich hohe Lewis-Acidität erklären kann. Beide Phasen sind sehr ähnlich zueinander. Das Vorhandensein des schwereren Halogens (Cl, Br) erzeugt eine Störung des Netzwerkes und verhindert die Ausbildung geordneter Strukturen. Der Grad der Unordnung in diesen Phasen ist höher als bei allen anderen Verbindungen des Aluminiumfluorids. Daraus resultiert eine gestörte Oberfläche, was wiederum zu koordinativ ungesättigtem Aluminium an der Oberfläche führt. Die sauren Zentren in ACF und ABF sind stärker als in anderen aluminiumhaltigen Lewis-Säuren. / The solid non-crystalline Lewis acid aluminum chlorofluoride (ACF, AlCl(x)F(3-x), x = 0.05 .. 0.3) has the highest Lewis acidity of any heterogeneous catalyst known so far. It reaches the acidity of antimony pentafluoride (SbF5) and in some cases even exceeds it. In this work the bulk structure of ACF and of the very similar compound aluminium bromofluoride (ABF) was studied by IR, ESR, NMR, and X-ray absorption spectroscopy. The surface of the compounds was investigated by adsorption of gases at low temperatures, as well as by IR and ESR spectroscopy of adsorbed probe molecules. The thermal behavior of these non-crystalline compounds was followed by DTA. The Lewis acidity of small model compounds was studied by NMR spectroscopy and ab initio calculations. All data were compared to those of well characterized known samples of the different modifications of aluminum fluoride (AlF3). The combined results of the measurements of both solid phases allow to set up a structure model for these compounds which can explain most of the spectrocopic data and the extraordinary high Lewis acidity. Both phases are very similar to each other. The occurrence of the heavier halogen (Cl, Br) causes a perturbation of the network and prevents it from forming ordered structures. The degree of disorder of these phases is higher than for any other known compounds of aluminum fluoride. This results in an disordered surface which leads to coordinatively unsaturated aluminum at the surface. The acidic centers of ACF and ABF are stronger than in any other aluminum containing Lewis acid.

The lap shear strength of chromic acid anodized, primed, Ti-6Al-4V alloy bonded with a high performance FM-5 polyimide adhesive has been investigated as a function of thermal treatment for selected times at various temperatures in air. The research findings indicate that the lap shear strength decreases with the increase in duration of the thermal treatment at constant temperature and with the increase in temperature at constant time. The bond fails increasingly in the oxide coating with increasing treatment temperature and time of treatment. Surface analysis results for debonded specimens suggest that the process leading to failure is the formation of fluorine-containing materials within the oxide, which weakens the adherend-adhesive bond. The formation of the fluorine components is facilitated by treatment at elevated temperatures. This study suggests that the presence of fluoride ions in the anodic oxide coating, prior to bonding, is detrimental to the bond strength of adhesively bonded Ti-alloy when exposed to high temperatures. The wedge test configuration was used to investigate the influence of temperature on the bond durability of adhesively bonded chromic acid anodized Ti-6Al-4V alloy in air. Based on the average crack length vs. exposure time data, the bond durability varied in the order -25°C > 24°C > 177°C. In each case, the bonded joint failed cohesively within the adhesive, irrespective of the temperature of exposure. XPS analysis and scanning electron photomicrographs of failure surfaces revealed that the failure occurred at the scrim cloth/adhesive interface. The influence of thermal treatment history on the bond durability of adhesively bonded chromic acid anodized Ti-6Al-4V alloy immersed in boiling water was also investigated. The average crack length vs. immersion time indicated no significant differences for specimens that were thermally treated and then bonded compared to the non-thermally treated specimens. In addition, the failure mode was cohesive within the adhesive for specimens prepared using various thermal treatment conditions. The crack growths for samples treated for 0.5 hour and 1.0 hour and for non-thermally treated specimens for any given exposure time were equivalent. In addition, cohesive failure (failure within adhesive) was observed for each specimen under each treatment condition. The specimens that were bonded and then thermally treated for 3 hours, failed in the oxide coating immediately upon insertion of the wedge. Surface analysis results for debonded specimens suggest that the process leading to failure is the formation of fluorine-containing materials within the oxide. The measured average activation energy for the formation of aluminum fluoride species is 149 kJ/mol. The high activation energy suggests that the rate of aluminum fluoride formation is substantial only at high temperatures. In summary, the presence of fluorides in the anodic oxide coatings prior to bonding is detrimental to the overall strength and durability of adhesively bonded chromic acid anodized Ti-6Al-4V joints which have been exposed to high temperatures (350°C-399°C). / Ph. D.