At the heart of high harmonic generation lies a combination of optical and collision physics entwined by a strong laser field. An electron, initially tunnel-ionized by the field, driven away then back in the continuum, finally recombines back to rest in its initial ground state via a radiative transition. The emitted attosecond (atto=10^-18) XUV light pulse carries all the information (polarization, amplitude and phase) about the photorecombination continuum-to-ground transition dipolar field. Photorecombination is related to the time-reversed photoionization process. In this perspective, high-harmonic spectroscopy extends well-established photoelectron spectroscopy, based on charged particle detection, to a fully coherent one, based on light characterization. The main achievement presented in this thesis is to use high harmonic generation to probe femtosecond (femto=10^-15) chemical dynamics for the first time. Thanks to the coherence imposed by the strong driving laser field, homodyne detection of attosecond pulses from excited molecules undergoing dynamics is achieved, the signal from unexcited molecules acting as the reference local oscillator. First, applying time-resolved high-harmonic spectroscopy to the photodissociation of a diatomic molecule, Br2 to Br + Br, allows us to follow the break of a chemical bond occurring in a few hundreds of femtoseconds. Second, extending it to a triatomic (NO2) lets us observe both the previously unseen (but predicted) early femtosecond conical intersection dynamics followed by the late picosecond statistical photodissociation taking place in the reaction NO2 to NO + O. Another important realization of this thesis is the development of a complementary technique to time-resolved high-harmonic spectroscopy called LAPIN, for Linked Attosecond Phase INterferometry. When combined together, time-resolved high-harmonic spectroscopy and LAPIN give access to the complex photorecombination dipole of aligned excited molecules. These achievements lay the basis for electron recollision tomographic imaging of a chemical reaction with unprecedented angstrom (1 angstrom= 0.1 nanometer) spatial resolution. Other contributions dedicated to the development of attosecond science and the generalization of high-harmonic spectroscopy as a novel, fully coherent molecular spectroscopy will also be presented in this thesis.

Technological progress in commercializing ultrafast lasers and detectors has allowed realization of cooperative processes on an ultrashort time scale, which demand a re-evaluation of the conventional cooperative phenomena with a new insight. Ultrafast cooperative phenomena in coherently prepared media and various applications of superfluorescence and coherent Raman scattering are studied in this dissertation. In particular, a simple theoretical testimony on analogy between a cooperative emission and coherent Raman scattering is presented by offering an opportunity to perform parallel research on these two processes from a unified point of view. On one hand, the superfluorescent pulse with a time duration of a few tens of picoseconds (ps) from alkali metal vapor is observed for the first time, even though cooperative phenomena in atomic vapor have been extensively studied for more than five decades. A dense rubidium vapor pumped by ultrashort (100 femtosecond, fs) pulses allows a realization of the ultrafast superfluorescence while a time-resolved study of superfluorescence is accomplished by using a streak camera with 2 ps time resolution. Experimental research on quantum nature of cooperative emissions has been “frozen” over the years (three decades) possibly because of the technical difficulties. Quantum fluctuations of superfluorescence development are explored experimentally by taking advantage of the ultra fast streak camera. Presumable applications of the superfluorescent pulse in e.g., a remote sensing, and an ultraviolet upconversion of the input infrared laser pulse are presented. The quantum interference due to different excitation pathways is revealed by the temporal coherent control technique while observing interferometric signals from alkali metal vapors. On the other hand, a new spectroscopic technique based on ultrafast coherent Raman scattering is developed. The key advantage of the presented technique is to suppress the non-resonant background noise which usually obscures possible applications of the other conventional coherent Raman techniques in practice. A reduction of the background noise is achieved by shaping and delaying the third pulse which probes the coherence of the medium (i.e., an enhancement of specific vibrations of the target molecules in unison) firstly prepared by two broadband pulses. We demonstrate a robustness and superiority of signal-to-noise ratio of the developed technique by identifying as few as 10000 bacterial spores at a single laser shot level. Finally, several comparative studies between cooperative and uncooperative processes are presented. A picosecond cooperative phenomenon in a three-photon resonant medium induced by a single as well as two-color ultrashort pulses is investigated. A time-resolved study shows that a picosecond cooperative effect is crucial in the well-established fields of resonant-enhanced multiphoton ionizations and harmonic generations. We also present a quantitative analysis for spontaneous versus broadband coherent Raman scattering on pyridine molecules. The spontaneous Raman signal is enhanced by 5 orders as a result of cooperative phenomena.

At the heart of high harmonic generation lies a combination of optical and collision physics entwined by a strong laser field. An electron, initially tunnel-ionized by the field, driven away then back in the continuum, finally recombines back to rest in its initial ground state via a radiative transition. The emitted attosecond (atto=10^-18) XUV light pulse carries all the information (polarization, amplitude and phase) about the photorecombination continuum-to-ground transition dipolar field. Photorecombination is related to the time-reversed photoionization process. In this perspective, high-harmonic spectroscopy extends well-established photoelectron spectroscopy, based on charged particle detection, to a fully coherent one, based on light characterization. The main achievement presented in this thesis is to use high harmonic generation to probe femtosecond (femto=10^-15) chemical dynamics for the first time. Thanks to the coherence imposed by the strong driving laser field, homodyne detection of attosecond pulses from excited molecules undergoing dynamics is achieved, the signal from unexcited molecules acting as the reference local oscillator. First, applying time-resolved high-harmonic spectroscopy to the photodissociation of a diatomic molecule, Br2 to Br + Br, allows us to follow the break of a chemical bond occurring in a few hundreds of femtoseconds. Second, extending it to a triatomic (NO2) lets us observe both the previously unseen (but predicted) early femtosecond conical intersection dynamics followed by the late picosecond statistical photodissociation taking place in the reaction NO2 to NO + O. Another important realization of this thesis is the development of a complementary technique to time-resolved high-harmonic spectroscopy called LAPIN, for Linked Attosecond Phase INterferometry. When combined together, time-resolved high-harmonic spectroscopy and LAPIN give access to the complex photorecombination dipole of aligned excited molecules. These achievements lay the basis for electron recollision tomographic imaging of a chemical reaction with unprecedented angstrom (1 angstrom= 0.1 nanometer) spatial resolution. Other contributions dedicated to the development of attosecond science and the generalization of high-harmonic spectroscopy as a novel, fully coherent molecular spectroscopy will also be presented in this thesis.

A novel dispersion-managed breathing-mode semiconductor mode-locked ring laser is developed. The "breathing-mode" designation derives from the fact that intracavity pulses are alternately stretched and compressed as they circulate around the ring resonator. The pulses are stretched before entering the semiconductor gain medium to minimize the detrimental strong integrating self-phase modulation and to enable efficient pulse amplification. Subsequently compressed pulses facilitate bleaching the semiconductor saturable absorber. The intracavity pulse compression ratio is higher than 50. Down chirping when compared to up chirping allows broader mode-locked spectra and shorter pulse generation owing to temporal and spectral semiconductor gain dynamics. Pulses as short as 185 fs, with a peak power of ~230 w, and a focused intensity of ~4.6 gw/cm2 are generated by linear down chirp compensation and characterized by shg-frog method. To our knowledge, this is the highest peak power and the shortest pulse generation from an electrically pumped all-semiconductor system. The very good agreement between the simulated and the measured results verifies our understanding and ability to control the physical mechanisms involved in the pulse shaping within the ring cavity. Application trends such as continuum generation via a photonic crystal fiber, two-photon fluorescence imaging, and ultrafast pulse source for pump-probe experiments are demonstrated.

Grâce à son accessibilité, sa polyvalence et sa sécurité, l'échocardiographie est devenue la technique d'imagerie la plus utilisée pour évaluer la fonction cardiaque. Au vu du succès de l'échographie ultrarapide par ondes planes des techniques similaires pour augmenter la résolution temporelle en échocardiographie ont été mise en oeuvre. L’augmentation de la résolution temporelle de l’échographie cardiaque au-delà des valeurs actuellement atteignables (~ 60 à 80 images par secondes), pourrait être utilisé pour améliorer d’autres caractéristiques de l'échocardiographie, comme par exemple élargir la plage de vitesses détectables en imagerie Doppler couleur limitées par la valeur de Nyquist. Nous avons étudié l'échocardiographie ultrarapide en utilisant des fronts d’ondes ultrasonores divergentes. La résolution temporelle atteinte par la méthode d'ondes divergentes a permis d’améliorer les capacités des modes d’échocardiographie en mode B et en Doppler couleur. La résolution temporelle de la méthode mode B a été augmentée jusqu'à 633 images par secondes, tout en gardant une qualité d'image comparable à celle de la méthode d’échocardiographie conventionnelle. La vitesse de Nyquist de la méthode Doppler couleur a été multipliée jusqu'à 6 fois au delà de la limite conventionnelle en utilisant une technique inspirée de l’imagerie radar; l’implémentation de cette méthode n’aurait pas été possible sans l’utilisation de fronts d’ondes divergentes. Les performances avantageuses de la méthode d'échocardiographie ultrarapide sont supportées par plusieurs résultats in vitro et in vivo inclus dans ce manuscrit. / Because of its low cost, versatility and safety, echocardiography has become the most common imaging technique to assess the cardiac function. The recent success of ultrafast ultrasound plane wave imaging has prompted the implementation of similar approaches to enhance the echocardiography temporal resolution. The ability to enhance the echocardiography frame rate beyond conventional values (~60 to 80 fps) would positively impact other echocardiography features, e.g. broaden the color Doppler unambiguous velocity range. We investigated the ultrafast echocardiography imaging approach using ultrasound diverging waves. The high frame rate offered by the diverging wave method was used to enhance the capabilities of both B-mode and color Doppler echocardiography. The B-mode temporal resolution was increased to 633 fps whilst the image quality was kept almost unchanged with reference to the conventional echocardiography technique. The color Doppler Nyquist velocity range was extended to up to 6 times the conventional limit using a weather radar imaging approach; such an approach could not have been implemented without using the ultrafast diverging wave imaging technique. The advantageous performance of the ultrafast diverging wave echocardiography approach is supported by multiple in vitro and in vivo results included in this manuscript.

No description available.

A indústria optoeletrônica passa por um período de transformação em que os materiais inorgânicos estão sendo substituídos pelos orgânicos, oligômeros e polímeros, na fabricação de alguns tipos de dispositivos. No entanto, fatores como baixa eficiência e tempo de vida impedem que os aparelhos com base nos polímeros entrem definitivamente no mercado. Para resolver estas questões, é necessário um conhecimento profundo da estrutura eletrônica desses materiais. Apesar do avanço científico, ainda existem pontos a esclarecer. Por exemplo, não existe um consenso sobre a natureza das excitações óticas primárias e dos processos não radiativos nos polímeros conjugados, principalmente com excitação no ultravioleta. Tais processos limitam a eficiência e podem influenciar nos processos fotoquímicos, determinando o tempo de vida de um dispositivo. Esses fenômenos ocorrem em alguns picossegundos e, portanto, a espectroscopia ultrarrápida é a técnica mais adequada para o seu estudo. Neste trabalho, foi implementado o aparato para espectroscopia de bombeio e prova em filmes finos de polímeros conjugados, no qual podem ser usados dois métodos de aquisição de dados, sensível à fase e pulso-a-pulso. O primeiro é o método padrão citado na literatura, no qual o feixe de excitação é modulado por um chopper e os sinais são medidos por amplificadores lock-in. No segundo, o condicionamento de sinais é feito por circuitos amplificadores e o processamento dos sinais é feito pulso-a-pulso. É um método que a princípio fornece melhor estatística, pois as flutuações do laser são normalizadas pulso-a-pulso, e não na média. Além disso, apresenta menor custo e torna o experimento de bombeio e prova mais simples, pois os únicos procedimentos críticos passam a ser a sobreposição dos feixes na amostra e a determinação do atraso zero entre bombeio e prova. Foi projetado e construído o circuito eletrônico de condicionamento de sinais e o software de aquisição foi desenvolvido em linguagem LabVIEW. Entretanto, o método pulso-a-pulso forneceu uma sensibilidade inadequada para o estudo de filmes poliméricos, (ΔT⁄T ~ 0,7%, limitada pelo ruído elétrico na amplificação dos pulsos detectados), em contraste com ΔT/T ~ 0,1% que foi alcançada pelo método sensível à fase. Desta maneira, foi usado o último método para o estudo da evolução do espectro e da dinâmica de emissão estimulada de um filme de MEH-PPV, com excitação no visível e no ultravioleta, permitindo o estudo da dinâmica de relaxação dos estados de mais alta energia. Os resultados no visível são compatíveis com os da literatura, o que demonstra a confiabilidade do aparato quanto à sensibilidade e resolução temporal e espectral. Os resultados com excitação no UV indicam que a transferência de energia de bandas mais energéticas para a banda π - π∗ (conversão interna) ocorre em aproximadamente 300 fs, confirmando as suposições da literatura quanto à relaxação energética ultrarrápida (regra de Kasha), além de sugerir a existência de bandas ainda mais energéticas do que as já conhecidas. Pretende-se futuramente determinar a eficiência de tal transferência energética, pois ela pode ser um fator limitante na eficiência de fotoluminescência em polímeros conjugados com excitação no ultravioleta. / The optoelectronics industry is currently undergoing a transition period in which inorganic materials are being replaced by organic materials, oligomers and polymers, in the fabrication of some types of devices. However, factors such as low efficiency and low lifetime prevent polymer based devices on entering the market definitely. The solution of these issues requires a thorough knowledge of the electronic structure of these materials, but despite of scientific advances, there are still points to be clarified. For example, there is no consensus on the nature of the primary optical excitations and non-radiative processes in conjugated polymers, specially with ultraviolet excitation. Such processes limit the efficiency and can influence the photochemical processes, determining the device lifetime. These phenomena occur on a femtosecond timescale and therefore, ultrafast spectroscopy is the most appropriate technique for their study. In this work, we implemented the apparatus for pump-probe ultrafast spectroscopy on thin films of conjugated polymers, which can be used with two methods of data acquisition, phase-sensitive and shot-by-shot. The first is the standard method reported in the literature in which the excitation beam is modulated by a chopper and the signals measured by lock-in amplifiers. In the second, the detector signal conditioning is done by conventional amplifier circuits, followed shot-to-shot signal processing. This method provides the best statistics, in principle, because the laser fluctuations are normalized for each pulse, instead of using the average. In addition, the apparatus has a lower cost and the experiment is simpler, having as critical procedures the alignment of the beams on the sample and the determination of zero delay, with all other procedures done via software. The electronic circuitry for signal conditioning was designed and built and data acquisition software that enables measurements with both methods was developed in the LabVIEW programming language. However, the shot-by-shot method provided an inadequate sensitivity for the study of polymeric films (ΔT⁄T ~0.7%, limited by electronic noise in the amplification of detector signals), compared with ΔT⁄T ~ 0.1%, which was achieved by the phase sensitive method, and was the goal at the beginning of the project. Thus, the latter method was used to study the evolution of the spectrum and dynamics of stimulated emission of a film of MEH-PPV, with excitation in the visible and UV, allowing the study of the dynamics of higher lying electronic states. The results in the visible are consistent with those reported in the literature, which demonstrates the performance of the apparatus with respect to sensitivity and time/spectral resolution. The results with UV excitation indicate that the energy transfer among the more energetic bands to the π - π* band (internal conversion) occurs in about 300 fs, confirming the assumptions of the literature on the ultrafast energy relaxation processes (Kashas rule), besides suggesting the existence of even more energetic bands than those currently known. As future work, we plan to measure the efficiency of this energy transfer process, since it may be the limiting step in determining the overall photoluminescence efficiency of conjugated polymers with ultraviolet excitation.

A indústria optoeletrônica passa por um período de transformação em que os materiais inorgânicos estão sendo substituídos pelos orgânicos, oligômeros e polímeros, na fabricação de alguns tipos de dispositivos. No entanto, fatores como baixa eficiência e tempo de vida impedem que os aparelhos com base nos polímeros entrem definitivamente no mercado. Para resolver estas questões, é necessário um conhecimento profundo da estrutura eletrônica desses materiais. Apesar do avanço científico, ainda existem pontos a esclarecer. Por exemplo, não existe um consenso sobre a natureza das excitações óticas primárias e dos processos não radiativos nos polímeros conjugados, principalmente com excitação no ultravioleta. Tais processos limitam a eficiência e podem influenciar nos processos fotoquímicos, determinando o tempo de vida de um dispositivo. Esses fenômenos ocorrem em alguns picossegundos e, portanto, a espectroscopia ultrarrápida é a técnica mais adequada para o seu estudo. Neste trabalho, foi implementado o aparato para espectroscopia de bombeio e prova em filmes finos de polímeros conjugados, no qual podem ser usados dois métodos de aquisição de dados, sensível à fase e pulso-a-pulso. O primeiro é o método padrão citado na literatura, no qual o feixe de excitação é modulado por um chopper e os sinais são medidos por amplificadores lock-in. No segundo, o condicionamento de sinais é feito por circuitos amplificadores e o processamento dos sinais é feito pulso-a-pulso. É um método que a princípio fornece melhor estatística, pois as flutuações do laser são normalizadas pulso-a-pulso, e não na média. Além disso, apresenta menor custo e torna o experimento de bombeio e prova mais simples, pois os únicos procedimentos críticos passam a ser a sobreposição dos feixes na amostra e a determinação do atraso zero entre bombeio e prova. Foi projetado e construído o circuito eletrônico de condicionamento de sinais e o software de aquisição foi desenvolvido em linguagem LabVIEW. Entretanto, o método pulso-a-pulso forneceu uma sensibilidade inadequada para o estudo de filmes poliméricos, (ΔT⁄T ~ 0,7%, limitada pelo ruído elétrico na amplificação dos pulsos detectados), em contraste com ΔT/T ~ 0,1% que foi alcançada pelo método sensível à fase. Desta maneira, foi usado o último método para o estudo da evolução do espectro e da dinâmica de emissão estimulada de um filme de MEH-PPV, com excitação no visível e no ultravioleta, permitindo o estudo da dinâmica de relaxação dos estados de mais alta energia. Os resultados no visível são compatíveis com os da literatura, o que demonstra a confiabilidade do aparato quanto à sensibilidade e resolução temporal e espectral. Os resultados com excitação no UV indicam que a transferência de energia de bandas mais energéticas para a banda π - π∗ (conversão interna) ocorre em aproximadamente 300 fs, confirmando as suposições da literatura quanto à relaxação energética ultrarrápida (regra de Kasha), além de sugerir a existência de bandas ainda mais energéticas do que as já conhecidas. Pretende-se futuramente determinar a eficiência de tal transferência energética, pois ela pode ser um fator limitante na eficiência de fotoluminescência em polímeros conjugados com excitação no ultravioleta. / The optoelectronics industry is currently undergoing a transition period in which inorganic materials are being replaced by organic materials, oligomers and polymers, in the fabrication of some types of devices. However, factors such as low efficiency and low lifetime prevent polymer based devices on entering the market definitely. The solution of these issues requires a thorough knowledge of the electronic structure of these materials, but despite of scientific advances, there are still points to be clarified. For example, there is no consensus on the nature of the primary optical excitations and non-radiative processes in conjugated polymers, specially with ultraviolet excitation. Such processes limit the efficiency and can influence the photochemical processes, determining the device lifetime. These phenomena occur on a femtosecond timescale and therefore, ultrafast spectroscopy is the most appropriate technique for their study. In this work, we implemented the apparatus for pump-probe ultrafast spectroscopy on thin films of conjugated polymers, which can be used with two methods of data acquisition, phase-sensitive and shot-by-shot. The first is the standard method reported in the literature in which the excitation beam is modulated by a chopper and the signals measured by lock-in amplifiers. In the second, the detector signal conditioning is done by conventional amplifier circuits, followed shot-to-shot signal processing. This method provides the best statistics, in principle, because the laser fluctuations are normalized for each pulse, instead of using the average. In addition, the apparatus has a lower cost and the experiment is simpler, having as critical procedures the alignment of the beams on the sample and the determination of zero delay, with all other procedures done via software. The electronic circuitry for signal conditioning was designed and built and data acquisition software that enables measurements with both methods was developed in the LabVIEW programming language. However, the shot-by-shot method provided an inadequate sensitivity for the study of polymeric films (ΔT⁄T ~0.7%, limited by electronic noise in the amplification of detector signals), compared with ΔT⁄T ~ 0.1%, which was achieved by the phase sensitive method, and was the goal at the beginning of the project. Thus, the latter method was used to study the evolution of the spectrum and dynamics of stimulated emission of a film of MEH-PPV, with excitation in the visible and UV, allowing the study of the dynamics of higher lying electronic states. The results in the visible are consistent with those reported in the literature, which demonstrates the performance of the apparatus with respect to sensitivity and time/spectral resolution. The results with UV excitation indicate that the energy transfer among the more energetic bands to the π - π* band (internal conversion) occurs in about 300 fs, confirming the assumptions of the literature on the ultrafast energy relaxation processes (Kashas rule), besides suggesting the existence of even more energetic bands than those currently known. As future work, we plan to measure the efficiency of this energy transfer process, since it may be the limiting step in determining the overall photoluminescence efficiency of conjugated polymers with ultraviolet excitation.

Discrete and Continuous spatial encoding methods are described with details of understanding principles and practical implications. Step by step experimental op- timization procedure of these methods to achieve slice selection are also discussed. In the subsequent chapters we use these methods for different applications. Spin-lattice relaxation parameters of NMR active nuclei provide valuable infor- mation on molecular dynamics. Single scan selective excitation methods of mea- surement of T1 result in significant reduction of time compared to the standard inversion recovery method and are attractive tools of applications in `Real time' NMR investigations of biological and chemical processes. It is shown here that the addition of the gradient echo following the selective excitation not only significantly improves the S/N ratio, but also makes GESSIR a versatile pulse sequence. Using this sequence, T1 values ranging from 2 s to 56 s have been measured with accuracy comparable to the standard IR experiment. This indicates that it is possible to utilize GESSIR for a wide range of molecules containing protons and hetero nuclei with medium to long T1 relaxation times as a routine NMR technique. The utility of the technique for studying other relaxation parameters has also been demonstrated. It may be mentioned that for measurement of relaxation parameters routinely, a few well-chosen points are enough. A fine selection of large number of experimental points could be useful when high accuracy is required or Chapter 3. GESSIR 91 for applications where certain property of the system investigated is changing in a continuous manner spatially and requires large number of slices to be selected as discussed in the next chapter. The long duration of time-honored two dimensional experiments is reduced to fraction of seconds by employing the ultrafast encoding experiments. Main com- plications in making the UF experiments available for routine use were the limited spectral widths and resolution in both UF and conventional dimensions. Various developments have been made in the path of improvements in increasing the spectral width in UF dimension. Of these, two experimental methods that are already proposed, namely the folding of peaks into the observable spectral window and the interleaved acquisition which doubles the spectral widths in both dimensions. The integration of covariance processing with ultrafast technique yields better correlated spectrum with considerable improvement in resolution. The effectiveness of the new processing is demonstrated for UF COSY experiments which can be easily extended to other ultrafast homonuclear experiments like TOCSY, NOESY as well as multi dimensions. The proposed processing method is an initial step to work on improving resolutions of UF data and making the ease of applicability of ultrafast spectroscopy as a routine multidimensional NMR. At the same time of this work W. Qui et.al [268] proposed a processing method based on covariance and pattern recognition for improving resolutions of spatially encoded data. They used pattern recognition algorithm also for avoiding the artifacts due to very low resolution data available with the UF experiment. They implemented the method UF TOCSY spectra and shown resolution improvement with the covariance pro- cessing for relatively more number of detection gradients which is many times hardware limited. Our method of covariance data processing is essentially same as that of Qui, less number of acquisition gradients were used in our processing, linear prediction and apodization concepts were utilized and the artifacts arise due mismatch of datas with positive and negative acquisition gradients are minimized by shifting one the data. In conclusion new methods of processing/the combination of various processing methods of the ultrafast data have the scope of improving the quality of ultrafast NMR spectra.

Master of Science / Department of Physics / Itzhak Ben-Itzhak / Imaging the interaction of molecular ion beams with ultrafast intense laser fields is a very powerful method to understand the fragmentation dynamics of molecules. Femtosecond laser pulses with different wavelengths and intensities are applied to dissociate and ionize molecular ions, and each resulting fragmentation channel can be studied separately by implementing a coincidence three-dimensional (3D) momentum imaging method. The work presented in this master’s report can be separated into two parts. First, the interaction between molecular ion beams and femtosecond laser pulses, in particular, the dissociation of CO[superscript]+ into C[superscript]++O, is studied. For that purpose, measurements are conducted at different laser intensities and wavelengths to investigate the possible pathways of dissociation into C[superscript]++O. The study reveals that CO[superscript]+ starts to dissociate from the quartet electronic state at low laser intensities. Higher laser intensity measurements, in which a larger number of photons can be absorbed by the molecule, show that the doublet electronic states with deeper potential wells, e.g. A [superscript]2Π, contribute to the dissociation of the molecule. In addition, the three-body fragmentation of CO[subscript]2[superscript]+ into C[superscript]++O[superscript]++O[superscript]+ is studied, and two breakup scenarios are separated using the angle between the sum and difference of the momentum vectors of two O[superscript]+ fragments. In the second part, improvements in experimental techniques are discussed. Development of a reflective telescope setup intended to increase the conversion efficiency of ultraviolet (UV) laser pulse generation is described, and the setup is used in the studies of CO[superscript]+ dissociation described in this report. The other technical study presented here is the measurement of the position dependence of timing signals picked off of a microchannel plate (MCP) surface. The experimental method is presented and significant time spread over the surface of the MCP detector is reported [1].