Spelling suggestions: "subject:"artificial sweet"" "subject:"artificial swept""
1 |
Tenké vrstvy plazmového polymeru na kovových substrátech / Thin plasma polymer films on metal substratesMach, Pavel January 2010 (has links)
The theoretical part of the thesis is focused on surface treatments, their evaluation from the point of view visual properties, plasma-enhanced chemical vapor deposition and analysis of thin layers prepared by plasma polymerization. The experimental part of the thesis deals with surface treatment of stainless steel AISI 304. Thin layers of pp-HMDSO (plasma-polymer) and of DLC are deposited on the steel´s surface for the purpose of preparing transparent layer, which protect steel´s surface against of making finger prints visible. As an objective method is chosen an immersion test in artificial sweat solution according to standard ČSN EN ISO 105-E04. Evaluation of the test is measured by a gloss-meter and by a colorimeter. Prepared layers are identificated by FTIR method.
|
2 |
Avaliação toxicogenética e ecotoxicológica de corantes têxteis / Toxicogenetic and ecotoxicological assessment of textile dyesOliveira, Gisele Augusto Rodrigues de 12 June 2013 (has links)
O tingimento de tecidos começou há milhares de anos e a disponibilidade comercial de corantes é enorme e crescente. A indústria têxtil brasileira desempenha um papel de inquestionável importância, destacando-se entre as principais atividades econômicas do país. O processo de tingimento é um dos fatores fundamentais no sucesso comercial dos produtos têxteis, uma vez que o consumidor exige cores resistentes à exposição ao calor, à luz, à transpiração e às lavagens. Segundo a literatura, condições de transpiração intensa contribuem para uma alta taxa de migração e subseqüente penetração de corantes têxteis para a pele humana. Além disso, 2 a 50% desses compostos permanecem no banho de tingimento e são descartados nos efluentes industriais, contaminando o ambiente e colocando em risco a saúde humana, uma vez que os métodos convencionais de tratamento de efluentes são ineficientes na remoção da coloração e da mutagenicidade de alguns corantes. Dentro deste contexto, este trabalho teve como objetivo avaliar os efeitos toxicogenéticos do corante Direct Black (DB38) original e após extração por lixiviação com suor sintético, utilizando o teste do cometa com fibroblastos e queratinócitos de pele humana, o teste Anexina V com fibroblastos e o ensaio de mutagenicidade com Salmonella typhimurium. Adicionalmente, foi investigada a ecotoxicidade dos corantes têxteis Direct Black 38 e Reactive Blue 15 (RB15) originais por meio de ensaios com sementes, dapnhias, minhocas e zebrafish realizados na UTOX, em Barcelona. O corante DB38 original e lixiviado não induziram genotoxicidade em fibroblastos e queratinócitos de pele humana. O corante DB38 original foi mutagênico para as linhagens TA98 e TA100 de S. typhimurium na presença de S9. Entretanto, o corante lixiviado não induziu mutagenicidade para essas linhagens testadas, considerando que a maior taxa de migração do corante para a solução de suor foi de ~1% nas seguintes condições: tingimento sem ensaboamento, pH 8,0 e 8 horas de incubação à 42°C. O corante original é citotóxico para fibroblastos após 48 horas de exposição. No entanto, essa citotoxicidade não foi mais observada após a lixiviação no suor. Os corantes DB38 e RB15 originais não foram tóxicos para as sementes de pepino, alface e tomate, e nem para as minhocas Eisenia foetida. Ambos os corantes foram fracamente tóxicos para Daphnia magna, porém o RB15 apresenta maior potencial tóxico em relação ao DB38. Os corantes DB38 e RB15 induziram malformações em larvas de zebrafish Danio rerio, caracterizadas por falha na inflação da bexiga natatória e alteração na cauda. Portanto, nossos resultados mostram a importância de se fazer não só a análise individual de corantes têxteis, mas também dos tecidos que os contêm. Além da necessidade de se desenvolver técnicas de tingimento mais seguras em relação à solidez da cor sob condições úmidas e as perdas de corante para o ambiente durante a etapa de fixação, indicando maior atenção ao estudo de efeitos sub-letais na avaliação do impacto desses compostos no ecossistema aquático. / The fabrics dyeing began thousands of years ago and the commercial availability of dyes is increasingly. The Brazilian textile industry plays a role of high importance, highlighting among the main economic activities in the country. The dyeing process is one of the key factors in the commercial success of textile products, since consumers are demanding colors more resistant to heat, light exposure, perspiration and washing. According to the literature, conditions of intense perspiration contribute to the migration and subsequent penetration of textile dyes to human skin. Furthermore, 2 to 50% of the initial dye load is present in the dye bath effluent and these compounds are discharged in industrial effluents, contaminating the environment and endangering human health, since the wastewater treatment systems are ineffective in removing the color and mutagenicity of some dyes. In this context, this study aimed to evaluate the toxicogenetic effects of the Direct Black 38 (DB38) dye original and extracted by leaching with artificial sweat using Comet assay with fibroblasts and keratinocytes from human skin, Anexin V assay with fibroblasts and Salmonella mutagenicity test. Additionally, we investigated the ecotoxicity of textile dye Direct Black 38 and Reactive Blue 15 (RB15) using assays with seeds, dapnhias, worms and zebrafish performed in UTOX in Barcelona. The original and leached DB38 dye did not induce genotoxicity in fibroblasts and keratinocytes from human skin. The original DB38 was mutagenic for TA98 and TA100 of S. typhimurium with S9. However, the solution with the leached dye did not induce mutagenicity for these tested strains, since the highest migration rate of the dye to the solution of artificial sweat was ~ 1% in the following conditions: type of dyeing without rinsing, pH 8.0 and 8-hour incubation at 42°C. The original dye was cytotoxic for fibroblasts after 48 hours of exposure. However, this cytotoxicity was no longer observed after leaching in sweat. The original DB38 and RB15 dyes showed no toxicity for cucumber, lettuce and tomato seeds and for earthworms Eisenia foetida. Both dyes were weakly toxic for Daphnia magna, but the RB15 has a higher toxic potential compared to DB38. The dyes DB38 and RB15 induced malformations in larvae of zebrafish Danio rerio by failure of the swim bladder inflation and changes in the tail. Therefore, our results show the importance of making the individual analysis of textile dyes, but also of fabrics containing them. Furthermore, it is necessary to develop safer techniques of dyeing in relation to the color fastness under humid conditions and the loss of dyes into the environment during the fixation step, indicating more attention to the study of sub-lethal effects in the evaluation of the impact of these compounds in the aquatic ecosystem.
|
3 |
Avaliação toxicogenética e ecotoxicológica de corantes têxteis / Toxicogenetic and ecotoxicological assessment of textile dyesGisele Augusto Rodrigues de Oliveira 12 June 2013 (has links)
O tingimento de tecidos começou há milhares de anos e a disponibilidade comercial de corantes é enorme e crescente. A indústria têxtil brasileira desempenha um papel de inquestionável importância, destacando-se entre as principais atividades econômicas do país. O processo de tingimento é um dos fatores fundamentais no sucesso comercial dos produtos têxteis, uma vez que o consumidor exige cores resistentes à exposição ao calor, à luz, à transpiração e às lavagens. Segundo a literatura, condições de transpiração intensa contribuem para uma alta taxa de migração e subseqüente penetração de corantes têxteis para a pele humana. Além disso, 2 a 50% desses compostos permanecem no banho de tingimento e são descartados nos efluentes industriais, contaminando o ambiente e colocando em risco a saúde humana, uma vez que os métodos convencionais de tratamento de efluentes são ineficientes na remoção da coloração e da mutagenicidade de alguns corantes. Dentro deste contexto, este trabalho teve como objetivo avaliar os efeitos toxicogenéticos do corante Direct Black (DB38) original e após extração por lixiviação com suor sintético, utilizando o teste do cometa com fibroblastos e queratinócitos de pele humana, o teste Anexina V com fibroblastos e o ensaio de mutagenicidade com Salmonella typhimurium. Adicionalmente, foi investigada a ecotoxicidade dos corantes têxteis Direct Black 38 e Reactive Blue 15 (RB15) originais por meio de ensaios com sementes, dapnhias, minhocas e zebrafish realizados na UTOX, em Barcelona. O corante DB38 original e lixiviado não induziram genotoxicidade em fibroblastos e queratinócitos de pele humana. O corante DB38 original foi mutagênico para as linhagens TA98 e TA100 de S. typhimurium na presença de S9. Entretanto, o corante lixiviado não induziu mutagenicidade para essas linhagens testadas, considerando que a maior taxa de migração do corante para a solução de suor foi de ~1% nas seguintes condições: tingimento sem ensaboamento, pH 8,0 e 8 horas de incubação à 42°C. O corante original é citotóxico para fibroblastos após 48 horas de exposição. No entanto, essa citotoxicidade não foi mais observada após a lixiviação no suor. Os corantes DB38 e RB15 originais não foram tóxicos para as sementes de pepino, alface e tomate, e nem para as minhocas Eisenia foetida. Ambos os corantes foram fracamente tóxicos para Daphnia magna, porém o RB15 apresenta maior potencial tóxico em relação ao DB38. Os corantes DB38 e RB15 induziram malformações em larvas de zebrafish Danio rerio, caracterizadas por falha na inflação da bexiga natatória e alteração na cauda. Portanto, nossos resultados mostram a importância de se fazer não só a análise individual de corantes têxteis, mas também dos tecidos que os contêm. Além da necessidade de se desenvolver técnicas de tingimento mais seguras em relação à solidez da cor sob condições úmidas e as perdas de corante para o ambiente durante a etapa de fixação, indicando maior atenção ao estudo de efeitos sub-letais na avaliação do impacto desses compostos no ecossistema aquático. / The fabrics dyeing began thousands of years ago and the commercial availability of dyes is increasingly. The Brazilian textile industry plays a role of high importance, highlighting among the main economic activities in the country. The dyeing process is one of the key factors in the commercial success of textile products, since consumers are demanding colors more resistant to heat, light exposure, perspiration and washing. According to the literature, conditions of intense perspiration contribute to the migration and subsequent penetration of textile dyes to human skin. Furthermore, 2 to 50% of the initial dye load is present in the dye bath effluent and these compounds are discharged in industrial effluents, contaminating the environment and endangering human health, since the wastewater treatment systems are ineffective in removing the color and mutagenicity of some dyes. In this context, this study aimed to evaluate the toxicogenetic effects of the Direct Black 38 (DB38) dye original and extracted by leaching with artificial sweat using Comet assay with fibroblasts and keratinocytes from human skin, Anexin V assay with fibroblasts and Salmonella mutagenicity test. Additionally, we investigated the ecotoxicity of textile dye Direct Black 38 and Reactive Blue 15 (RB15) using assays with seeds, dapnhias, worms and zebrafish performed in UTOX in Barcelona. The original and leached DB38 dye did not induce genotoxicity in fibroblasts and keratinocytes from human skin. The original DB38 was mutagenic for TA98 and TA100 of S. typhimurium with S9. However, the solution with the leached dye did not induce mutagenicity for these tested strains, since the highest migration rate of the dye to the solution of artificial sweat was ~ 1% in the following conditions: type of dyeing without rinsing, pH 8.0 and 8-hour incubation at 42°C. The original dye was cytotoxic for fibroblasts after 48 hours of exposure. However, this cytotoxicity was no longer observed after leaching in sweat. The original DB38 and RB15 dyes showed no toxicity for cucumber, lettuce and tomato seeds and for earthworms Eisenia foetida. Both dyes were weakly toxic for Daphnia magna, but the RB15 has a higher toxic potential compared to DB38. The dyes DB38 and RB15 induced malformations in larvae of zebrafish Danio rerio by failure of the swim bladder inflation and changes in the tail. Therefore, our results show the importance of making the individual analysis of textile dyes, but also of fabrics containing them. Furthermore, it is necessary to develop safer techniques of dyeing in relation to the color fastness under humid conditions and the loss of dyes into the environment during the fixation step, indicating more attention to the study of sub-lethal effects in the evaluation of the impact of these compounds in the aquatic ecosystem.
|
4 |
Metal Particles – Hazard or Risk? Elaboration and Implementation of a Research Strategy from a Surface and Corrosion PerspectiveMidander, Klara January 2009 (has links)
Do metal particles (including particles of pure metals, alloys, metal oxides and compounds) pose a hazard or risk to human health? In the light of this question, this thesis summarizes results from research conducted on metal particles, and describes the elaboration and implementation of an in vitro test methodology to study metal release from particles through corrosion and dissolution processes in synthetic biological media relevant for human exposure through inhalation/ingestion and dermal contact. Bioaccessible metals are defined as the pool of released metals from particles that potentially could be made available for absorption by humans or other organisms. Studies of bioaccessible metals from different metal particles within this thesis have shown that the metal release process is influenced by material properties, particle specific properties, size distribution, surface area and morphology, as well as the chemistry of synthetic biological test media simulating various human exposure scenarios. The presence of metal particles in proximity to humans and the fact that metals can be released from particles to a varying extent is the hazard referred to in the title. The bioavailable metal fraction of the released metals (the fraction available for uptake/absorption by humans through different exposure routes) is usually significantly smaller than the bioaccessible pool of released metals, and is largely related to the chemical form and state of oxidation of the released metals. Chemical speciation measurements of released chromium for instance revealed chromium to be complexed to its non-available form in simulated lung fluids. Such measurements provide an indirect measure of the potential risk for adverse health effects, when performed at relevant experimental conditions. A more direct way to assess risks is to conduct toxicological in-vitro testing of metal particles, for instance on lung cell cultures relevant for human inhalation. Induced toxicity of metal particles on lung cells includes both the effect of the particles themselves and of the released metal fraction (including bioaccessible and bioavailable metals), the latter shown to be less predominant. The toxic response was clearly influenced by various experimental conditions such as sonication treatment of particles and the presence of serum proteins. Thorough characterization of metal particles assessing parameters including chemical surface composition, degree of agglomeration in solution, size distribution, surface area and morphology was performed and discussed in relation to generated results of bioaccessibility, bioavailability and induced toxicity. One important conclusion was that neither the surface composition nor the bulk composition can be used to assess the extent of metals released from chromium-based alloy particles. These findings emphasize that information on physical-chemical properties and surface characteristics of particles is essential for an in-depth understanding of metal release processes and for further use and interpretation of bioaccessibility data to assess hazard and reduce any risks induced by human exposure to metal particles. / QC 20100803
|
Page generated in 0.0849 seconds