¤@¡BRole of 5-thio-(2-nitrobenzoic acid)-capped gold nanoparticles in the sensing of chromium(VI): remover and sensor This study describes a simple, rapid method for sensing Cr(VI) using 5-thio-(2-nitrobenzoic acid) modified gold nanoparticles (TNBA-AuNPs) as a remover for Cr(III) and as a sensor for Cr(VI). We discovered that TNBA-AuNPs were dispersed in the presence of Cr(VI), whereas Cr(III) induced the aggregation of TNBA-AuNPs. Due to this phenomenon, TNBA-AuNPs can be used as a sorbent material for the removal of > 90% Cr(III), without removing Cr(VI). After centrifuging a solution containing Cr(III), Cr(VI), and TNBA-AuNPs, Cr(III) and Cr(VI) were separately present in the precipitate and supernatant. In other words, TNBA-AuNPs are capable of separating a mixture of Cr(III) and Cr(VI). The addition of ascorbic acid to the supernatant resulted in a reduction of Cr(VI) to Cr(III), driving the aggregation of TNBA-AuNPs. The selectivity of this approach is more than 1000-fold for Cr(VI) over other metal ions. The minimum detectable concentration of Cr(VI) was 1 £gM using this approach. Inductively coupled plasma mass spectrometry provided an alternative for the quantification of Cr(III) and Cr(VI) after a mixture of Cr(III) and Cr(VI) had been separated by TNBA-AuNPs. The applicability of this approach was validated through the analysis of Cr(VI) in drinking and tap water. ¤G¡BFluorescent Sensing of Total, Protein-bound, Free, and Oxidized Homocysteine in Plasma through the Combination of Tris(2-carboxyethyl)Phosphine Reduction, Fluorosurfactant-Capped Gold Nanoparticles Extraction, and o-Phthaldialdehyde Derivatization This study reports a simple, selective, and sensitive method for fluorescent detection of total, protein-bound, free, and oxidized homocysteine (HCys) using tris(2-carboxyethyl)phosphine (TCEP) as a reducing agent, fluorosurfactant-capped gold nanoparticles (FSN-AuNP) as a preconcentrating probe, and o-Phthaldialdehyde (OPA) as a derivatizing agent. TCEP was used to reduce the disulfide bonds of protein-bound and oxidized HCys. FSN-AuNPs were capable of extracting HCys from a complicated complex because the FSN capping layer can stabilize the AuNPs in a high-salt solution and inhibit non-specific adsorption. HCys was selectively derivatized with OPA in the absence of a nucleophile. By taking advantage of these features, the selectivity of the proposed system is greater than 100-fold for HCys and homocystine (HCys-HCys disulfide; diHCys) compared to any aminothiols. The limits of detection (LODs) for HCys and diHCys were 4.4 and 4.6 nM, respectively. Compared to other sensors, the proposed system provides an approximately 3-300-fold improvement in the detection of HCys. Different forms of plasma HCys were determined by varying the order of disulfide reduction with TCEP. The proposed system was successfully applied to determine the total, protein-bound, free, and oxidized HCys in plasma. To the best of our knowledge, the proposed system not only provides the first method for detecting various forms of plasma HCys, but also has the lowest LOD value for HCys when compared to other sensors.

Block copolymer/inorganic nanoparticle hybrids draw great attention of scientists from various areas for their potential applications in diverse fields such as microelectronics, sensors, and solar cells. Inorganic nanoparticles (NPs) can be expected to be incorporated into block copolymers with order and selectivity by self-assembly of NPs and/or by synergistic self-assembly between NPs and block copolymers. The morphology and nanostructure order of block copolymers can be also adjusted and directed by incorporation of NPs. In this study, the effect of the size and modification of AuNPs on the morphology and nanostructure orientation of block copolymer PPMA-b-PMMA thin films were systematically investigated. The lateral BCP structure in thin films was improved by adding AuNPs. The controlled location of AuNPs in the BCP thin films depended on the particle size and stabilizing species. The re-orientation of cylindrical domains depended on the modification of AuNPs. PPMA-coated AuNPs, corresponding to the lower surface energy component of BCP, were powerful in directing the cylinders from parallel to perpendicular to the substrate. These results provide a general guide for other BCP/inorganic NP hybrid systems for desired morphology and nanostructure orientation.

This research focuses on the microwave properties of nanoparticles for use as contrast and hyperthermia agents. Currently, visible light is used for irradiation of nanoparticles as hyperthermia agents. Additionally, visible/Near-infrared light is used for photoacoustic tomography (PAT) imaging. Compared to optical wavelengths, frequencies in microwave range transmit through tissue with high penetration depth . Thus, deep cancerous cells and malignant tissue may be treated and imaged. These nanoparticles could enable the use of a hybrid microwave/acoustic technique known as thermoacoustic tomography. Here, quantitative measurements of the heat generation in super paramagnetic iron oxide nanoparticle (SPIONs), gold nanoparticles (AuNPs), and gold nanoclusters (AuNCs) induced by microwave energy at 3 GHz, are presented and compared. Based on our experiments, SPIONs are the most efficient nanoparticles for microwave heating. Very high concentrations of SPIONs are able to convert microwave energy into heat about 22° C more than DI-water. AuNPs, which support plasmon resonances, do not provide heat under microwave irradiation as predicted by our computational analysis based on Mie Theory. AuNCs are a new form of ultra-small (<2.5 nm) AuNPs which do not support plasmonic resonances and have supra-molecular properties such as sub-conduction band transitions. Interestingly, AuNCs have the potential to absorb microwave energy and may provide an alternative to SPIONs. These nanoparticles had not yet been studied before in this frequency region. In addition, the absorption coefficient of nanoparticles were calculated using complex permittivity data from a dip probe kit and a Vector Network Analyzer (VNA) in a broad band range from 500 MHZ to 10 GHz. This method allows identification of best frequency region with highest penetration depth. In the last step, the nanoparticles with different concentrations were tested as exogenous contrast agents in a Thermoacoustic Tomography (TAT) system. TAT utilizes the penetration depth of microwave energy while producing high resolution images through acoustic waves. The addition of an exogenous contrast agent improves image quality by more effectively converting microwave energy to heat. The experiment reveals that the time resolved thermoacoustic signal (TA) from SPIONs is stronger than AuNPs and AuNCs and thus, the image contrast produced by SPIONs is stronger than the two other aforementioned nanoparticles.

Magister Scientiae (Medical Bioscience) - MSc(MBS) / Despite the advances in therapies such as chemotherapy and radiotherapy, tumours have been shown to be resistant to the treatments. Gold nanoparticles (AuNPs) have been recognized as effective radiosensitizers of low energy (e.g. 200–500 kV) X-rays, leading to the emission of Auger electrons that cause highly localised ionizing damage to cells. Spherical AuNPs were synthesised via the reduction of the chloroaurate ions by sodium citrate. Characterisation of AuNPs involved UV-visible spectrophotometry, zeta (Z) potential, dynamic light scattering (DLS) and polydispersity index (PDI) measurements for determination of surface plasmon resonance (SPR), surface charge and stability, as well as transmission electron microscopy (TEM) for hydrodynamic core sizes, size distribution width and shape of AuNPs. Both the 5 and 10 nm AuNPs were found to be anionic with λmax absorbance of 525 nm and uniform size distribution. DLS measurement at 38.12 nm and 48.50 nm, respectively for 5 nm and 10 nm AuNPs, points to aggregation of the AuNPs. However, TEM measurements confirmed the core size of the 10 nm AuNPs. Non-malignant Chinese hamster ovary (CHO-K1), brain endothelial (BEnd5), breast (MCF-10A), isolated human lymphocytes and malignant breast (MCF-7) cell lines were treated with 50 μg/ml of AuNPs, and irradiated with either 1, 2 or 4 Gy X-rays or 1 or 2 Gy p(66)/Be neutron radiation. The γ-H2AX foci assay, cytokinesis-block micronucleus assay, MTT assay and fluorescence-activated cell sorting (FACS) was used to determine that amount of double stranded breaks (DSBs) in isolated lymphocytes, the presence and number of micronuclei (MNi) within binucleated cells (BNCs), cell viability and cell cycle progression, respectively. Preliminary experiments that established the reliability of the study regarding the induction of DNA damage after the bombardment of AuNPs by scattered low kV X-rays, were carried out on lymphocytes. Combined treatment (AuNPs and radiation) resulted in more endogenous foci in comparison to lymphocytes that were treated with AuNPs only. The CHO-K1 and MCF-7 cells showed higher MNi frequencies after the combination treatment of AuNPs and radiation compared to the number of MNi in samples exposed to AuNPs and radiation separately. The AuNPs alone influenced the cellular kinetics of all cell types. Interaction indices, which is the enhancement factor of AuNPs in combination with radiation, for AuNPs and 6 MV 2 Gy X-rays of 1.6 to 1.7 and 1.3 to 1.4 have respectively been determined for CHO-K1 and MCF-7 cells, whilst that for the other cell types used in the study were not different from Unity. As expected, the interaction indices between AuNPs and p(66)/Be neutrons was lower than the interaction indices after 2 Gy X-rays, as p(66)/Be neutrons interact only with the nuclei of the AuNP's atoms and the X-ray photons interact with the orbital electrons of the atoms of the AuNPs leading to Auger electron emission. The cell viability assay showed that 50 μg/ml of AuNPs had an inhibitory effect on cellular proliferation, in all four cell linnes whereas the lower concentrations (2.5, 5 and 10 μg/ml) had no effect. Results in this study, revealed an increase in the accumulation of CHO-K1 an MCF-7 cells in the G₂/M phase of the cell cycle after being treated with AuNPs followed by X-ray radiation, suggesting that the cells have possibly been sensitised to the damaging effects of radiation. Further studies are required to quantify internalised AuNPs and to then link the possible concentration differences of the AuNPs to differences in radiation damage effects observed for the different cell types.

Yes / Lung surfactant (LS) monolayers that continuously expand and compress during breathing cycles, act as the first line barrier for inhaled nanoparticles. It is known that nanoparticles which adsorb to the surface of the surfactant layer facilitate the rearrangement of lipids and peptides at various stages of the breathing cycle. However, the structural mechanisms for this ability of the lipid rearrangement are not yet fully understood. Coarse-grained molecular dynamics simulations are performed to investigate the role of surfactant protein B (SP-B) segments (SP-B1–25) in modulating the biophysical properties of the surfactant monolayer in the presence of polydisperse gold nanoparticles (AuNPs) at different concentrations. Herein, we observe that the AuNPs significantly alter the inherent structural and dynamical properties of the monolayer and its components in three different breathing states. When adsorbed into the monolayer, the AuNPs inhibit the ability of the monolayer to recover its surface tension and other properties. The presence of SP-B1–25 in the monolayer accelerates the diffusion of the monolayer phospholipids, contrarily to the role of AuNPs on phospholipid diffusion. Also, the AuNPs and the peptides in the monolayer significantly increase their agglomeration in the presence of one another. Overall, the simulations predict that the presence of polydisperse AuNPs hampers the stability and biophysical functions of the LS in contrast to the role of the peptide. This study provides a clear view of the hydrophobic peptide role in the LS monolayer at the interface along with the interactions and the translocation of AuNPs that could have a significant impact to assess the NPs inhalation. / This work was completed with the support of University of Technology Sydney (UTS) FEIT Research Scholarship, UTS IRS (S. I. H.).

<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

Magister Scientiae - MSc / Polyaromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants that have been shown to be teratogenic, mutagenic and carcinogenic and pose serious threats to the health of aquatic and human life. Several methods have been developed for their determination such as immunoassay, gas chromatography and high performance liquid chromatography (HPLC) in combination with fluorescence or absorbance detection. However, these methods are known to manifest underlying disadvantages such as complicated pretreatment, high costs and time consuming processes. In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles. Transmission electron microscopy showed that the synthesized nanoparticles were in the range of 20-50 nm. The properties of the composite formed upon deposition of the nanoparticles on the PPyox film were investigated by electrochemical methods. The PPyox/Ag-AuNPs/GCE sensor showed strong catalytic activity towards the oxidation of anthracene, phenanthrene and pyrene, and was able to simultaneously detect anthracene and phenanthrene in a binary mixture of the two. The catalytic peak currents obtained from square wave voltammetry increased linearly with anthracene, phenanthrene and pyrene concentrations in the range of 3.0 x 10-6 to 3.56 x 10-4 M,3.3 x 10-5 to 2.83 x 10-4 M, 3.3 x 10-5 to 1.66 x 10-4 M and with detection limits of 0.169 μM, 1.59 μM and 2.70 μM, respectively. The PPyox/Ag-AuNPs/GCE sensor is simple, has antifouling properties and is less time consuming with a response time of 4 s. / South Africa

Thèse de recherche en chimie dans le domaine des polymères / Les polymères photostimulables sont une classe spécifique de polymères stimulables capables de subir un changement de conformation sous l’action de l’irradiation lumineuse. La lumière est un stimulus externe physique pouvant avoir un impact sur un matériau sans modifier directement sa composition chimique. De plus, la taille d’un faisceau lumineux comme le laser peut atteindre des dimensions de l’ordre de la centaine de nanomètres, permettant son utilisation pour les travaux de précision. Enfin, pouvoir allumer et éteindre la source de lumière de manière instantanée rend ce stimulus attrayant pour un vaste choix d’applications en raison de la possibilité de contrôler avec précision les échelles de temps d’utilisation du stimulus. C’est pourquoi les chercheurs s’intéresse à la lumière en tant que stimulus et à ses potentielles applications pour les polymères stimulables. Dans les deux premiers chapitres de ce manuscrit, la lumière sera utilisée pour induire indirectement une réponse au sein de polymères thermostimulables. Pour cela, des matériaux photothermiques capables de convertir la lumière en chaleur seront combinés avec des polymères thermostimulables à base de microgels de poly(N-isopropylacrylamide) (PNIPAM) afin de préparer des matériaux composites. Ces types de matériaux sont déjà bien connus dans la littérature. Cependant, à l’échelle micrométrique, ils souffrent d’une mauvaise optimisation en raison de la ségrégation des matériaux lors de leur préparation. Le premier chapitre traitera tout d’abord de la préparation d’un tel composite à base de microgels de PNIPAM et de nanoparticules d’or (AuNPs). Différents paramètres permettant d’améliorer la dispersion des AuNPs dans les microgels seront identifiés dans le but d’optimiser la synthèse de ces matériaux composites. Ensuite, les microgels composites seront immobilisés en surface, et leur gonflement en surface en fonction de la température et de l’irradiation sera étudié à l’aide de la technique Surface Force Apparatus (SFA). Cette étude innovante rapporte pour la première fois la caractérisation quantitative du gonflement de polymères photo- et thermostimulables immobilisés en surface à l’échelle du nanomètre. En effet, ce type de système n’a jusqu’à maintenant été étudié que de manière qualitative. Dans un second chapitre, les AuNPs qui ont servi de nanoparticules photothermiques modèles ont été remplacées par la polydopamine (PDA), une nanoparticule aux propriétés photothermiques dont l’intérêt s’est développé plus récemment. La PDA, comme les AuNPs, interagit et se complexe avec les amines primaires contenus dans nos microgels de PNIPAM. Ainsi, les deux systèmes composites sont présumés similaires en termes de conformation et de structure. Les microgels composites à base de PDA ont été préparés dans des proportions équivalentes de nanoparticules photothermiques à celles à base de AuNPs de l’étude précédente, ce qui a permis leur comparaison. Les deux matériaux composites ont démontré des propriétés photothermiques similaires, avec cependant des performances légèrement supérieures pour les microgels composites à base de PDA. Utilisant des sources d’irradiation de même puissance, la PDA, lorsqu’irradiée à 360 nm, semble démontrer des propriétés photothermiques environ 25% supérieures à celles des AuNPs sphériques irradiées à leur longueur d’onde de résonance plasmonique. Bien qu’étant supérieur en termes de propriétés photothermiques, le gonflement en surface des microgels composites à base de PDA était inférieur à celui des microgels composites à base d’AuNPs. Cette différence de comportement s’explique par une densité de greffage des microgels composites à base de PDA inférieure à la densité de greffage des microgels composites à base d’AuNPs. Il en résulte une augmentation de l’espace adjacent pour les microgels moins densément greffés pouvant gonfler dans toutes les directions contrairement à une densité de greffage importante qui favorise le gonflement des microgels de manière perpendiculaire au substrat. Enfin, dans le troisième chapitre, des brosses de polymères aux propriétés réversiblement photo-dimérisables ont été préparées. Pour cela, des chaînes pendantes de coumarine ont été introduites dans les brosses de polymères. La coumarine est un groupement qui peut subir une dimérisation sous l’effet de la lumière UVA (λUVA > 310 nm) et peut se dédimériser réversiblement sous l’irradiation des UVC (λUVC < 260 nm). La photo-dimérisation de la coumarine ne peut avoir lieu que si elle respecte certains critères stricts, à savoir une orientation parallèle ou antiparallèle des groupements de coumarine et une distance de séparation inférieure à 4,2 Å. Ainsi, l’immobilisation de la coumarine sur une surface peut affecter la photo-dimérisation en raison de la difficulté de contrôler la distance de séparation entre les groupements de coumarine situés sur les chaînes de polymères adjacentes immobilisées en bout de chaînes. Dans cette partie, la propriété de photo-dimérisation réversible des brosses de polymères contenant des chaînes pendantes de coumarine a ainsi été étudiée en fonction de la distance de séparation entre les chaînes polymériques. De plus, la caractérisation de la capacité de gonflement de la couche de polymères ainsi obtenue dans l’eau a permis d’estimer la nature de la photo-dimérisation des chaînes polymériques, qui est favorisée de manière intermoléculaire pour un greffage dense de chaînes de polymères. / Photo-responsive polymers are a specific class of stimuli-responsive polymers which undergo conformational changes under light irradiation. Light is an external physical stimulus which can impact a medium without affecting its chemical composition. Width beam can be as low as a few hundreds of nanometers, which makes it usable for precision work. Furthermore, the capacity to turn off and on the light source instantaneously makes it very attractive for all kind of applications because of the possibility to control the timescale of the stimulus. Therefore, the work will focus on the study of light as a stimulus and its potentials of applications in order to trigger a response in stimuli-responsive polymers either directly, or indirectly. In the first two chapters of this manuscript, light will be used to trigger indirectly a response in thermo-responsive polymers. For this, photothermal materials that can convert light into heat will be combined with thermo-responsive polymers based on poly(N-isopropylacrylamide) (PNIPAM) microgels in order to prepare composite materials. These types of materials are already well known in the literature. However, at the microscale level, they suffer from poor optimization because of segregation of materials during the preparation process. The first chapter will treat the preparation of such composite based on PNIPAM microgels and gold nanoparticles (AuNPs). Different parameters allowing the improvement of AuNPs dispersion in the microgels will be identified in order to optimize the synthesis of the composite materials. Then, the composite microgels were immobilized on surface, and their swelling as a function of the temperature, and triggered by light were studied using the Surface Force Apparatus (SFA). This innovative study reports the first quantitative characterization of the swelling of photo- and thermo-responsive polymers immobilized on surfaces and at the nanometer scale. Indeed, these systems have been reported multiple times in the literature. However, the nature and scale at which these materials are studied were so far limited to qualitative characterizations only. In the second chapter, the AuNPs which served as model photothermal nanoparticles were swapped with polydopamine (PDA), a nanoparticle with photothermal properties whose interest has recently grown. PDA, like AuNPs, can interact and complex with primary amines that are present in our PNIPAM microgels. Thus, both composite systems were expected to be similar in terms of conformation and structure. The PDA containing composite microgels were prepared using equivalent proportions of photothermal nanoparticles compared to the precedent study, allowing a comparison of both PDA and AuNPs containing composite microgels. Both composites demonstrated similar photothermal properties, albeit a slightly better performance for the composite microgels based on PDA. Using light sources of equivalent power, PDA demonstrated photothermal properties when irradiated at 360 nm, approximately 25% superior than that of spherical AuNPs irradiated at their localized surface plasmon resonance. Despite being slightly superior in terms of photothermal responsive properties, the surface swelling of the PDA containing composites were inferior to that of AuNPs containing composites because of differences in terms of grafting caused by differences of interactions between the composites with silica-based substrates. Finally, in the third chapter, polymer brushes with reversibly photo-dimerizable properties were prepared. For this purpose, pendant chains of coumarin were introduced into polymer brushes. Coumarin is a functional group that can undergo dimerization under the influence of UVA light (λUVA > 310 nm) and can reversibly dedimerize upon irradiation with UVC (λUVC < 260 nm). The photo-dimerization of coumarin can only occur if strict criteria are met, including a parallel or antiparallel orientation of the coumarin groups and a separation distance of less than 4.2 Å. Thus, the immobilization of coumarin on a surface can affect the photo-dimerization due to the difficulty of controlling the separation distance between the coumarin groups located on end-tethered adjacent polymer chains. In this part, the reversible property of photo-dimerization of polymer brushes containing pendant chains of coumarin was studied as a function of the separation distance between the polymer chains. Furthermore, the characterization of the swelling capacity of the resulting polymer layer in water allowed us to assess the nature of the photo-dimerization of the polymer chains, which is favored in an intermolecular manner for densely grafted polymer chains.