Thesis (Ph. D.)--University of Pretoria, 2002. / Includes bibliographical references.

Nanofibrous mats are interesting scaffold materials for biomedical applications like tissue engineering due to their interconnectivity and their size dimension which mimics the native cell environment. Electrospinning provides a simple route to access such fiber meshes. This thesis addresses the structural and functional control of electrospun fiber mats. In the first section, it is shown that fiber meshes with bimodal size distribution could be obtained in a single-step process by electrospinning. A standard single syringe set-up was used to spin concentrated poly(ε-caprolactone) (PCL) and poly(lactic-co-glycolic acid) (PLGA) solutions in chloroform and meshes with bimodal-sized fiber distribution could be directly obtained by reducing the spinning rate at elevated humidity. Scanning electron microscopy (SEM) and mercury porosity of the meshes suggested a suitable pore size distribution for effective cell infiltration. The bimodal fiber meshes together with unimodal fiber meshes were evaluated for cellular infiltration. While the micrometer fibers in the mixed meshes generate an open pore structure, the submicrometer fibers support cell adhesion and facilitate cell bridging on the large pores. This was revealed by initial cell penetration studies, showing superior ingrowth of epithelial cells into the bimodal meshes compared to a mesh composed of unimodal 1.5 μm fibers. The bimodal fiber meshes together with electrospun nano- and microfiber meshes were further used for the inorganic/organic hybrid fabrication of PCL with calcium carbonate or calcium phosphate, two biorelevant minerals. Such composite structures are attractive for the potential improvement of properties such as stiffness or bioactivity. It was possible to encapsulate nano and mixed sized plasma-treated PCL meshes to areas > 1 mm2 with calcium carbonate using three different mineralization methods including the use of poly(acrylic acid). The additive seemed to be useful in stabilizing amorphous calcium carbonate to effectively fill the space between the electrospun fibers resulting in composite structures. Micro-, nano- and mixed sized fiber meshes were successfully coated within hours by fiber directed crystallization of calcium phosphate using a ten-times concentrated simulated body fluid. It was shown that nanofibers accelerated the calcium phosphate crystallization, as compared to microfibers. In addition, crystallizations performed at static conditions led to hydroxyapatite formations whereas in dynamic conditions brushite coexisted. In the second section, nanofiber functionalization strategies are investigated. First, a one-step process was introduced where a peptide-polymer-conjugate (PLLA-b-CGGRGDS) was co-spun with PLGA in such a way that the peptide is enriched on the surface. It was shown that by adding methanol to the chloroform/blend solution, a dramatic increase of the peptide concentration at the fiber surface could be achieved as determined by X-ray photoelectron spectroscopy (XPS). Peptide accessibility was demonstrated via a contact angle comparison of pure PLGA and RGD-functionalized fiber meshes. In addition, the electrostatic attraction between a RGD-functionalized fiber and a silica bead at pH ~ 4 confirmed the accessibility of the peptide. The bioactivity of these RGD-functionalized fiber meshes was demonstrated using blends containing 18 wt% bioconjugate. These meshes promoted adhesion behavior of fibroblast compared to pure PLGA meshes. In a second functionalization approach, a modular strategy was investigated. In a single step, reactive fiber meshes were fabricated and then functionalized with bioactive molecules. While the electrospinning of the pure reactive polymer poly(pentafluorophenyl methacrylate) (PPFPMA) was feasible, the inherent brittleness of PPFPMA required to spin a PCL blend. Blends and pure PPFPMA showed a two-step functionalization kinetics. An initial fast reaction of the pentafluorophenyl esters with aminoethanol as a model substance was followed by a slow conversion upon further hydrophilization. This was analysed by UV/Vis-spectroscopy of the pentaflurorophenol release upon nucleophilic substitution with the amines. The conversion was confirmed by increased hydrophilicity of the resulting meshes. The PCL/PPFPMA fiber meshes were then used for functionalization with more complex molecules such as saccharides. Aminofunctionalized D-Mannose or D-Galactose was reacted with the active pentafluorophenyl esters as followed by UV/Vis spectroscopy and XPS. The functionality was shown to be bioactive using macrophage cell culture. The meshes functionalized with D-Mannose specifically stimulated the cytokine production of macrophages when lipopolysaccharides were added. This was in contrast to D-Galactose- or aminoethanol-functionalized and unfunctionalized PCL/PPFPMA fiber mats. / Biofunktionale Materialien gewinnen immer größere Bedeutung in biomedizinischen Anwendungen wie dem künstlichen Ersatz von Knochen oder Blutgefässe. Weiterhin können diese Stoffe nützlich sein, um die Wechselwirkung zwischen Biomaterialien und biologischen Systemen wie Zellen oder Organismen weiter zu erforschen. In diversen Studien konnten Größen wie dreidimensionaler Strukturaufbau, Oberflächentopographie, Mechanik und die Funktionalisierung mit bioaktiven Substanzen als Einflussfaktoren identifiziert werden, welche auf verschiedenen Größenskalen von makroskopisch bis nanoskopisch untersucht wurden und gegenwärtig erforscht werden. Bioinspiriert von Kollagenfasern, die als Strukturmotiv an verschieden Orten im menschlichen Körper vorkommen (z.B. extrazelluläre Matrix) konnte gezeigt werden, dass Fasermatten, die eine ähnliche Größendimensionen wie die vorher erwähnten Kollagenfasern (Ø ~ 500 nm) aufweisen, eine aussichtsreiche Gerüstmatrix darstellen. Eine einfache Methode Fasermatten in diesen Dimensionen herzustellen ist Elektrospinning, wobei typischerweise eine viskose Polymerlösung durch anlegen eines Hochspannungsfeldes verstreckt wird. Obwohl auf diese Weise hergestellte Fasermatten für gewisse Zelllinien eine ideale Zellwechselwirkung aufweisen, ist die Zellbesiedelung solcher Netzwerke, bedingt auch durch die kleinen Porendurchmesser, problematisch und bedarf meistens weiterer Prozessierungsschritte. Diese Arbeit beschäftigt sich mit der einfachen Herstellung von strukturel und funktional kontrollierten Fasersystem mittels Elektrospinning. Der erste Teil behandelt ein Einschrittverfahren zum Elektrospinnen von bimodalen Fasermatten bestehend aus Nano- und Mikrofasern. In Zellstudien mit Epithelzellen konnte gezeigt werden, dass solche Netzwerke tiefer besiedelt werden als Matten bestehend aus unimodalen 1.5 μm dicken Fasern. Des Weiteren wurden diese Fasermatten für fasergerichtete Kristallisation von Kalziumcarbonat und – phosphat benutzt. In einem zweiten Teil wurden 2 Strategien für die Faserfunktionalisierung mit Peptiden und Zuckermolekülen entwickelt. Zum einen wurde gezeigt, dass funktionale Peptidfasern durch Verspinnung einer Mischung von einem Peptid-Polymer-Konjugat mit einem kommerziellen Polymer hergestellt werden konnten. Zusätzlich wurde ein modularer Ansatz für die Herstellung von reaktiven Fasern ausgearbeitet, die anschließend mit Peptiden oder Zuckern funktionalisiert wurden. Die Bioaktivität der Zucker funktionalisierten Fasern konnte durch Zellversuche erfolgreich bestätigt werden.

Tissue engineering is a multidisciplinary field that is rapidly emerging as a promising new approach in the restoration and reconstruction of tissues. In this approach, three dimensional (3D) scaffolds are of great importance. Scaffolds function both as supports for cell growth and depot for sustained release of required active agents (e.g. enzymes, genes, antibiotics, growth factors). Scaffolds should possess certain properties in accordance with usage conditions. Wet-spinning is a simple technique that has been widely used for the fabrication of porous scaffolds for tissue engineering applications. Natural polymers can effectively be used in scaffold fabrication due to their biocharacteristics. Among natural polymers, chitosan and alginate are two of the most studied ones in tissue engineering and drug delivery fields because of being biologically renewable, biodegradable, biocompatible, non-antigenic, non-toxic and biofunctional. In this study, two kinds of porous scaffolds were produced as chitosan and alginate coated chitosan fibrous scaffolds by wet-spinning technique In order to investigate the delivery characteristics of the scaffolds, loading of gentamicin as a model antibiotic and bovine serum albumin (BSA) as a model protein was carried out in different loading models. Resultant scaffolds were characterized in terms of their structural formation, biodegradation, biomineralization, water uptake and retention ability and mechanical properties. Additionally, release kinetics of gentamicin and BSA were examined. Efficiency of gentamicin on Escherichia coli (E.coli) was examined. Characterization of scaffolds revealed their adequacy to be used in bone tissue engineering applications and capability to be employed as bioactive agent delivery systems.

The potential of flaxseed (Linum usitatissimum L.) protein to release bioactive peptides upon enzymatic hydrolysis was evaluated. Flaxseed protein released angiotensin I-converting enzyme inhibitory (ACEI) peptides during in vitro simulated gastrointestinal (GI) digestion in a static (no removal of digested products) and a dynamic model (removal of <1 kDa molecules in the intestinal phase). The ACEI activity of the gastric plus intestinal digest (absorbed fraction-IC50: 0.04 mg N/mL; retained fraction-IC50: 0.05 mg N/mL; degree of hydrolysis, DH: 46.78 %) of the dynamic model was significantly higher (P<0.05) than that of the static model (IC50: 0.39 mg N/mL; DH: 43.95 %). Polypeptides of 48, 41, 29 and 20 kDa could be releasing these ACEI peptides. Six peptides in the highest ACEI fraction (0.5-1 kDa) of the absorbable gastric plus intestinal digest were identified via de novo sequencing. Only digests of the static model exhibited hydroxyl radical (OH) scavenging activity (IC50: 0.40 mg N/mL), suggesting the inappropriateness of such models in this type of research. Presence of mucilage and oil interfered with the in vitro digestibility of flaxseed protein, which could limit the release of ACEI peptides during GI digestion. The protein digestibility of milled whole flaxseed (12.61 %) was significantly improved (P<0.05) with the removal of mucilage (51.00 %) and oil together with mucilage (66.79 %). The digestibility of isolated flaxseed protein was 68.00 %.<p> Flaxseed protein, hydrolyzed (DH: 11.94-70.62 %) with Flavourzyme® in a central composite rotatable design, possessed bioactivities with identified optimum enzyme/substrate and time of hydrolysis combinations, including ACEI activity (71.59-88.29 %, 83.7 LAPU/g protein, 19.9 h), scavenging of OH (12.48-22.08 %, 30.2 LAPU/ g protein, 1.5 h) and superoxide radical (O2-) (26.33-39.41 %, 4.9 LAPU/ g protein, 16.3 h) and inhibiting linoleic acid oxidation (0.71-94.33 %, 1.6 LAPU/ g protein, 12.6 h). The degradation pattern of polypeptides during enzymatic hydrolysis indicated that 48 and 13 kDa molecules could be releasing these bioactive peptides. De novo sequencing identified two ACEI and five OH scavenging peptides in the hydrolysate fractions (0.5-1.05 kDa) with the highest bioactivities. The findings suggest the importance of flaxseed protein as a source of cardioprotective bioactive peptides.

The potential of flaxseed (Linum usitatissimum L.) protein to release bioactive peptides upon enzymatic hydrolysis was evaluated. Flaxseed protein released angiotensin I-converting enzyme inhibitory (ACEI) peptides during in vitro simulated gastrointestinal (GI) digestion in a static (no removal of digested products) and a dynamic model (removal of <1 kDa molecules in the intestinal phase). The ACEI activity of the gastric plus intestinal digest (absorbed fraction-IC50: 0.04 mg N/mL; retained fraction-IC50: 0.05 mg N/mL; degree of hydrolysis, DH: 46.78 %) of the dynamic model was significantly higher (P<0.05) than that of the static model (IC50: 0.39 mg N/mL; DH: 43.95 %). Polypeptides of 48, 41, 29 and 20 kDa could be releasing these ACEI peptides. Six peptides in the highest ACEI fraction (0.5-1 kDa) of the absorbable gastric plus intestinal digest were identified via de novo sequencing. Only digests of the static model exhibited hydroxyl radical (OH) scavenging activity (IC50: 0.40 mg N/mL), suggesting the inappropriateness of such models in this type of research. Presence of mucilage and oil interfered with the in vitro digestibility of flaxseed protein, which could limit the release of ACEI peptides during GI digestion. The protein digestibility of milled whole flaxseed (12.61 %) was significantly improved (P<0.05) with the removal of mucilage (51.00 %) and oil together with mucilage (66.79 %). The digestibility of isolated flaxseed protein was 68.00 %.<p> Flaxseed protein, hydrolyzed (DH: 11.94-70.62 %) with Flavourzyme® in a central composite rotatable design, possessed bioactivities with identified optimum enzyme/substrate and time of hydrolysis combinations, including ACEI activity (71.59-88.29 %, 83.7 LAPU/g protein, 19.9 h), scavenging of OH (12.48-22.08 %, 30.2 LAPU/ g protein, 1.5 h) and superoxide radical (O2-) (26.33-39.41 %, 4.9 LAPU/ g protein, 16.3 h) and inhibiting linoleic acid oxidation (0.71-94.33 %, 1.6 LAPU/ g protein, 12.6 h). The degradation pattern of polypeptides during enzymatic hydrolysis indicated that 48 and 13 kDa molecules could be releasing these bioactive peptides. De novo sequencing identified two ACEI and five OH scavenging peptides in the hydrolysate fractions (0.5-1.05 kDa) with the highest bioactivities. The findings suggest the importance of flaxseed protein as a source of cardioprotective bioactive peptides.

Pulsed laser deposition (PLD) was used to deposit hydroxyapatite (HA) thin films on various substrates, including silicon (100) and titanium (Ti-6Al-4V) alloy. Thin films of amorphous HA were deposited at room temperature and then annealed over a range of temperatures. The microstructure and composition of the films were determined using scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), and X-ray diffraction (XRD). The HA films were found to achieve total crystallinity at 350㮠The mechanical properties of the films were studied by means of nanoindentation and scratch adhesion testing. Crystalline and adherent HA thin films prepared using PLD and post deposition annealing have many potential medical and dental applications.

No description available.

The health maintaining properties of citrus consumption are attributed to the wide assortment of bioactive compounds. Consumption of grapefruit along with certain medications, however, is posing a risk of drug toxicity and side reactions. The first study involved isolation of bioactive furocoumarins with a combination of chromatographic techniques and synthesis. Five furocoumarins namely, dihydroxybergamottin, paradisin A, bergamottin, bergaptol and geranylcoumarin were isolated from grapefruit and series of furocoumarin monomers and paradisin A were synthesized. The second study involved influence of pre- and post-harvest factors on the levels of furocoumarins in grapefruit juice. Considerable differences were observed in the levels of these compounds in different grapefruit cultivars. Ray Red showed the lowest levels of all three furocoumarins and Duncan contains the highest amount of DHB and bergamottin, where as the highest levels of paradisin A was observed in Star Ruby. The highest levels of DHB and bergamottin were found in Flame cultivar grown in California. The changes in the levels of these furocoumarins during the season in Rio Red and Marsh White grapefruit cultivars were evaluated. The third study investigated biological activities of grapefruit juices and furocoumarins. Grapefruit and Pummelo juices were found to be potent inhibitors of cytochrome CYP3A4 and CYP2C9 isoenzymes at 5% concentration while CYP2D6 was less affected. Among the five furocoumarins tested, the inhibitory potency was in the order of paradisin A>dihydroxybergamottin>bergamottin>bergaptol>geranylcoumarin at 0.1 µM to 0.1 mM concentrations. A fourth study investigated the effect of furocoumarins on bacterial auto-inducer signaling, and found that furocoumarins are potent inhibitors of AI-1 and AI-2 activities at 0.01% concentration. In a fifth study, involving synthesized furocoumarin monomers and dimer on anti-proliferative activities on normal and cancer cell lines, furocoumarins found to be non-toxic to normal cells. However, bergamottin showed a significant anti-proliferative activity in HT-29 and MCF-7 cell lines. This dissertation indicates that furocoumarins are bioactive compounds from grapefruit juice with potent inhibitory property of major drug metabolizing cytochrome P450 isoenzymes. Furocoumarins show a considerable variation between varieties, location and season. These results corroborate the involvement of furocoumarins in grapefruit drug interaction.

Thesis (M.S. in M.S.E.)--School of Materials Science and Engineering, Georgia Institute of Technology, 2004. Directed by Rober Narayan. / Includes bibliographical references (leaves 85-92).

published_or_final_version / Chinese Medicine / Master / Master of Philosophy