This study evaluated the effect of chemical oxidation on the bioremediation of polycyclic aromatic hydrocarbons (PAHs) contaminated sediments. Sediments were treated in sequential steps: biotreatment, chemical oxidation, and biotreatment. The first biotreatment step was initiated via addition of nutrients, microbial seeds, co-metabolites, and/or Tween 80 (surfactant). The chemical oxidation step was conducted using Fenton?s Reagent, ozonation, and peroxone (combination of ozone and hydrogen peroxide). The objective was to enhance the PAHs bioavailability via oxidation of natural organic matter and transformation of Heavy PAHs into more biodegradable compounds. Biotreatment was reestablished as a final polishing step to further degrade remaining PAHs and more biodegradable oxidation by-products. The proposed mechanism was proven successful for the less contaminated sediment (Scioto River) and not the highly contaminated and chemically more complex sediment (Lake Superior). Given this mechanism only worked for the Scioto River sediment, further research is required to determine the mechanisms limiting treatment.

Soil that is heavily contaminated with polycyclic aromatic hydrocarbons (PAHs) is often found at the sites of former gasworks and wood-impregnation plants. Since PAHs are toxic these sites represent a hazard to human health and the environment, and therefore they need to be treated, preferably by a method that destroys the contaminants, and thus eliminates the problem permanently. However, during biological and chemical degradation of PAHs other toxic compounds may be formed. If these transformation products are sufficiently persistent they could potentially accumulate during remedial processes. In the work underlying this thesis the degradation and transformation of PAHs were studied in three remedial processes: viz. a pilot-scale bioslurry reactor, microcosms with wood-rotting fungi and lab-scale treatments with Fenton's reagent. A group of transformation products referred to as oxygenated-PAHs (oxy-PAHs) was found to be particularly important, as these compounds are toxic and were shown to be relatively persistent in the environment. The oxy- PAHs were, for instance, found at significant concentrations in the gasworks soil used in most of the studies. This soil was highly weathered and had therefore been depleted of the more readily degradable compounds. In addition, experiments in which earthworms were exposed to the gasworks soil showed that the oxy-PAHs were more easily taken up in living organisms than PAHs. To facilitate the studies, new extraction and fractionation methods were developed. For instance, pressurized liquid extraction (PLE) was investigated for its reliability and efficiency to extract PAHs and oxy-PAHs from soil. Furthermore, a selective PLE-method was developed that can simultaneously extract and separate the PAHs and oxy-PAHs into two different fractions. This was accomplished by adding a chromatographic material (silica or Florisil) to the extraction cell. Under certain conditions all three remedial processes resulted in increasing amounts of oxy- PAHs in the soil. For example, 1-acenaphthenone and 4-oxapyrene-5-one accumulated in the bioslurry reactor. Similarly, in the soil inoculated with a white-rot fungus 9-fluorenone, benzo[a]anthracene-7,12-dione, 4-hydroxy-9-fluorenone and 4-oxapyrene-5-one accumulated. Finally, in an ethanol-Fenton treatment the concentration of some PAH-quinones increased in the soil. The results show that it might be necessary to monitor oxy-PAHs as well as PAHs during the remediation of PAH-contaminated sites. Otherwise, the soil may be considered detoxified too early in the process. In the long term it would be desirable to include analyses with sufficient marker compounds to follow the possible production and elimination of the oxy-PAHs. However, until such compounds can be identified it is suggested that contaminated soil should be screened for oxy-PAHs in general. The selective PLE-method presented in this thesis could be a useful tool for this.