Spelling suggestions: "subject:"bridge peer"" "subject:"bridge pior""
11 |
面外繰り返し水平力を受ける逆L形鋼製箱形断面橋脚の耐震性能に関する解析的研究葛, 漢彬, GE, Hanbin, 渡辺, 俊輔, WATANABE, Syunsuke, 宇佐美, 勉, USAMI, Tsutomu, 青木, 徹彦, AOKI, Tetsuhiko 07 1900 (has links)
No description available.
|
12 |
Scour Countermeasure Design For Sequential Viaducts On Ankara - Pozanti HighwayCam, Umut Egemen 01 March 2012 (has links) (PDF)
Foundations of river bridges need to be protected with respect to excessive scouring.
Degree of protection depends on the severity of scouring action around bridge piers
and abutments. A case study is carried out to design appropriate protective measures
for sequential viaducts located on Ankara-Pozant highway in Turkey. A number of
analyses are conducted to obtain water surface profiles throughout the study reach.
Local scour depths at piers and abutments of the viaducts are then obtained. The
design process for countermeasures is performed concerning hydraulic, hydrologic,
constructional, and economical requirements. To this end, riprap, partially grouted
riprap, and articulated concrete blocks are studied in these view points. A criterion
based on a selection index, which is defined by the National Cooperative Highway
Research Program in the USA, is applied in this study. Implementation of partially
grouted ripraps at infrastructural elements is found to be an appropriate solution.
|
13 |
Verification of Bridge Foundation Fixity for Three Different Types of SoilZeeshan, Syed 01 May 2016 (has links)
The purpose of this study is to investigate the footing fixity effect on the lateral deflection of a bridge pier for different types of soil. Generally, the rotational restraint coefficient at top and bottom of pier (degree of fixity of the pier) is used to compute the effective length factor of pier which is in turn used to determine the pier deflection. The magnitude of the deflection is used to determine whether the p-delta force effect should be considered while designing the pier. However, the pier deflection is usually computed by assuming that the pier footing is completely fixed to the ground. In case of soil under footing, rotational restraint coefficient is taken as five for all types of soils. In this study, finite element analysis method was used to determine the pier deflection by providing three actual soil environments and compare the results with the traditional approach. Hence, the rotational restraint coefficient will be modified according to the deflection computed from the finite element analysis.
|
14 |
Physical modeling of local scour around complex bridge piersLee, Seung Oh 02 March 2006 (has links)
Local scour around bridge foundations has been recognized as one of the main causes of bridge failures. The objective of this study is to investigate the relationships among field, laboratory, and numerical data for the purpose of improving scour prediction methods for complex bridge piers. In this study, three field sites in Georgia were selected for continuous monitoring and associated laboratory models were fabricated with physical scale ratios that modeled the full river and bridge cross sections to consider the effect of river bathymetry and bridge geometry. Three different sizes of sediment and several geometric scales of the bridge pier models were used in this study to investigate the scaling effect of relative sediment size, which is defined as the ratio of the pier width to the median sediment size. The velocity field for each bridge model was measured by the acoustic Doppler velocimeter (ADV) to explain the complicated hydrodynamics of the flow field around bridge piers as guided by the results from a numerical model. In each physical model with river bathymetry, the comparison between the results of laboratory experiments and the measurements of prototype bridge pier scour showed good agreement for the maximum pier scour depth at the nose of the pier as well as for the velocity distribution upstream of each bridge pier bent. Accepted scour prediction formulae were evaluated by comparison with extensive laboratory and field data. The effect of relative sediment size on the local pier scour depth was examined and a modified relationship between the local pier scour depth and the relative sediment size was presented. A useful methodology for designing physical models was developed to reproduce and predict local scour depth around complex piers considering Froude number similarity, flow intensity, and relative sediment size.
|
15 |
The Evaluation on the Effectiveness of Shields for Bridge Pier ProtectionNepal, Prateek January 2020 (has links)
No description available.
|
16 |
Structural Vulnerability Assessment of Bridge Piers in the Event of Barge CollisionRibbans, David A 18 March 2015 (has links)
The inland waterway system in the United States is fundamental to the transportation system as a whole and the success of the nation’s economy. Barge transportation in these waterways levitates congestion on the highway system and is beneficial when comparing barge transportation to other modes of freight transportation in measures of capacity, congestion, emissions, and safety. Unavoidably, the highway system intersects with the waterways, resulting in the risk of vessels collision into bridge structures. Particularly for barge impact, the literature is questioning the accuracy and oversimplification of the current design specifications.
The impact problem was investigated in this research using three-dimensional finite-element analyses. To investigate the collision of a barge into a bridge pier, a range of material models are first investigated through simulating a drop-hammer impact onto a reinforced concrete beam. A detailed model of a jumbo hopper barge is then developed, with particular detail in the bow. The barge model is examined for its response to impact into rigid piers of different size and shape. RC piers, having different shape and boundary conditions, are impacted by the barge model and assessed using selected metrics. The final part of the research examines the response of an existing bridge pier subject to an impact by a chemical transporter barge that frequently travels in the waterway.
|
17 |
Time development of local scour at a bridge pier fitted with a collarAlabi, Patrick Dare 23 August 2006
A series of relatively recent bridge failures due to pier scour, as reported in literature, has rekindled interest in furthering our understanding of the scour process and for developing improved ways of protecting bridges against scour. Moreover, increased attention is being given to the state of Canadas infrastructure, a major aspect of which is the transportation network. In part, there is concern about both the impact of a failure on the handling of traffic flow while the failure is being remedied and on the cost of replacing the failed system component. As such, attention is being given to the scour design of new bridges and to the inspection, maintenance and management of existing bridge structures. The two major countermeasure techniques employed for preventing or minimising local scour at bridge piers are increased scour resistance and flow alteration. In the former case, the objective is to combat the erosive action of the scour-inducing mechanisms using hard engineering materials or physical barriers such as rock riprap. In the latter case, the objective is to either inhibit the formation of the scour-inducing mechanisms or to cause the scour to be shifted away from the immediate vicinity of the pier. This research focuses on a particular application of the latter technique. <p> In this study, the use of collars for reducing the effects of local scour at a bridge pier is presented together with the time aspect of the scour development. The adoption of a collar is based on the concept that its existence will sufficiently inhibit and/or deflect the local scour mechanisms so as to reduce the local scour immediately adjacent to the pier. The overall objective of the research is to study the temporal development of the scour for a pier fitted with a collar and a pier without a collar. More specifically, the objectives are: i) to evaluate the effectiveness of a pier collar for mitigating the depth of scour that would otherwise occur at a bridge pier; and ii) to assess the occurrence of an equilibrium scour condition, if achieved, or of the implications of not achieving such a condition in respect of interpreting the results obtained from a physical hydraulic model study. <p>The study was conducted using a physical hydraulic model operated under clear-water conditions in cohesionless bed material. Tests were conducted using two different pier diameters so as to determine the effect of pier diameter on the temporal development of scour for a plain pier. Also investigated was the effect of collar size on the time development of scour and its efficacy at preventing scour at a bridge pier. The time development of the scour hole around the model pier with and without a collar installed was compared with similar studies on bridge piers. Several equations for the temporal development of scour depth and those for the prediction of the equilibrium scour depth were tested as part of this study. <p>The results of the model study indicated that the maximum depth of scour is highly dependent on the experimental duration. The depth of the scour hole increases as the duration of the increased flow that initiates the scour increases. The extent of scour observed at the pier also increases as the duration of the tests increases. It was found that the temporal development of the scour hole at the pier was dependent on whether or not the pier was fitted with a collar placed at the bed level. The pathway to an equilibrium scour depth is different depending on whether the pier is fitted with a collar or not. With a collar in place, the development of the scour hole is considerably delayed. A truly equilibrium scour condition is not readily attainable and was not achieved in the work reported herein. It was demonstrated that wrong conclusions may be reached if a test is stopped short of an equilibrium state. As regards the temporal development of scour depth and for the tests in which no collar was fitted to the pier, it was noted that the form of equation that fits the experimental data well was the one given by Franzetti et al. (1982). Furthermore, it is possible to reach a variety of conclusions about the efficacy of using collars as a pier scour countermeasure technique, depending on which definition of time to equilibrium scour is adopted.
|
18 |
繰り返しせん断力を受ける補剛板の強度と変形能評価葛西, 昭, Kasai, Akira, 渡辺, 智彦, Watanabe, Tomohiko, 天野, 麻衣, Amano, Mai, 宇佐美, 勉, Usami, Tsutomu 03 1900 (has links)
No description available.
|
19 |
Time development of local scour at a bridge pier fitted with a collarAlabi, Patrick Dare 23 August 2006 (has links)
A series of relatively recent bridge failures due to pier scour, as reported in literature, has rekindled interest in furthering our understanding of the scour process and for developing improved ways of protecting bridges against scour. Moreover, increased attention is being given to the state of Canadas infrastructure, a major aspect of which is the transportation network. In part, there is concern about both the impact of a failure on the handling of traffic flow while the failure is being remedied and on the cost of replacing the failed system component. As such, attention is being given to the scour design of new bridges and to the inspection, maintenance and management of existing bridge structures. The two major countermeasure techniques employed for preventing or minimising local scour at bridge piers are increased scour resistance and flow alteration. In the former case, the objective is to combat the erosive action of the scour-inducing mechanisms using hard engineering materials or physical barriers such as rock riprap. In the latter case, the objective is to either inhibit the formation of the scour-inducing mechanisms or to cause the scour to be shifted away from the immediate vicinity of the pier. This research focuses on a particular application of the latter technique. <p> In this study, the use of collars for reducing the effects of local scour at a bridge pier is presented together with the time aspect of the scour development. The adoption of a collar is based on the concept that its existence will sufficiently inhibit and/or deflect the local scour mechanisms so as to reduce the local scour immediately adjacent to the pier. The overall objective of the research is to study the temporal development of the scour for a pier fitted with a collar and a pier without a collar. More specifically, the objectives are: i) to evaluate the effectiveness of a pier collar for mitigating the depth of scour that would otherwise occur at a bridge pier; and ii) to assess the occurrence of an equilibrium scour condition, if achieved, or of the implications of not achieving such a condition in respect of interpreting the results obtained from a physical hydraulic model study. <p>The study was conducted using a physical hydraulic model operated under clear-water conditions in cohesionless bed material. Tests were conducted using two different pier diameters so as to determine the effect of pier diameter on the temporal development of scour for a plain pier. Also investigated was the effect of collar size on the time development of scour and its efficacy at preventing scour at a bridge pier. The time development of the scour hole around the model pier with and without a collar installed was compared with similar studies on bridge piers. Several equations for the temporal development of scour depth and those for the prediction of the equilibrium scour depth were tested as part of this study. <p>The results of the model study indicated that the maximum depth of scour is highly dependent on the experimental duration. The depth of the scour hole increases as the duration of the increased flow that initiates the scour increases. The extent of scour observed at the pier also increases as the duration of the tests increases. It was found that the temporal development of the scour hole at the pier was dependent on whether or not the pier was fitted with a collar placed at the bed level. The pathway to an equilibrium scour depth is different depending on whether the pier is fitted with a collar or not. With a collar in place, the development of the scour hole is considerably delayed. A truly equilibrium scour condition is not readily attainable and was not achieved in the work reported herein. It was demonstrated that wrong conclusions may be reached if a test is stopped short of an equilibrium state. As regards the temporal development of scour depth and for the tests in which no collar was fitted to the pier, it was noted that the form of equation that fits the experimental data well was the one given by Franzetti et al. (1982). Furthermore, it is possible to reach a variety of conclusions about the efficacy of using collars as a pier scour countermeasure technique, depending on which definition of time to equilibrium scour is adopted.
|
20 |
NONLINEAR DYNAMICS CHARACTERIZATION OF BIDIRECTIONAL SEISMIC RESPONSE OF STEEL BRIDGE PIERS / 鋼製橋脚の2方向地震応答の非線形動力学的特性分析Liu, Yanyan 26 March 2018 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21090号 / 工博第4454号 / 新制||工||1692(附属図書館) / 京都大学大学院工学研究科都市社会工学専攻 / (主査)教授 五十嵐 晃, 教授 澤田 純男, 教授 KIM Chul-Woo / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM
|
Page generated in 0.0861 seconds