Spelling suggestions: "subject:"built up""
31 |
Assessing and Modelling the Structural Build-up of Concrete in the Context of Digital FabricationIvanova, Irina 24 May 2023 (has links)
Nowadays, construction industry is rapidly moving towards digitalization and automation that should enable increased rates and efficiency of construction processes, as well as higher possibilities for customization and architectural freedom. Among all technologies under development, digital fabrication with concrete by means of layered extrusion appears to be one of the most promising for purposes of fast mass housing construction. It enables formwork-free production of structures via layer-by-layer concrete printing. Freedom from formwork potentially makes the construction process more cost- and time-saving, but poses multiple challenges to mix design and test methods, especially in terms of concrete rheology. A special focus must be put on the structural build-up of concrete at rest, which is related to its buildability, i.e. capacity of the material to retain the shape of the extruded layers under their own weight and the weight of the subsequently placed layers.
This research investigates into the structural build-up of cementitious materials, i.e. evolution of their strength and deformation properties over time at rest, and includes development and refinement of methodology to assess the structural build-up, as well as its modelling and prediction.
With respect to methodology, major attention was directed to the constant rotational velocity (CRV) test used for evaluation of the static yield stress development, and rationalization of its application under field conditions. Based on a large amount of experiments performed with two rheometers of different design, characteristic curves and points describing patterns in behaviour of cementitious materials during a CRV test were established. The experimental study also dealt with assessing the effects of alterations in main elements of the CRV test protocol, such as test approach (single- versus multi-batch), pre-shear regime, applied CRV, on the test results. Possible errors in CRV tests were addressed and methods to improve the procedures of testing and data evaluation were suggested. In particular, the single-batch approach was enhanced by implementation of the developed breaking criterion, a concept of zero measurement for non-pre-sheared samples was introduced, and a method for simplified evaluation of elasticity by a single-head rheometer was proposed. General methodological recommendations on the design of a CRV test protocol were formulated. The results are applicable for various cementitious materials and not limited to concretes for layered extrusion.
Furthermore, test methods for assessing the structural build-up of printable concretes were studied in terms of their applicability under field conditions, potential for automation, descriptiveness of obtained data and efficiency in predicting the buildability of printed concrete structures. The methods under investigation included CRV test, unconfined uniaxial compression test (UUCT), fast penetration test and newly proposed confined uniaxial compression test (CUCT); all tests were performed on extruded samples of eight printable concrete mixtures with various compositions and rheological properties. The corresponding results were juxtaposed in order to establish correlations between the data and compared to the results of buildability tests, in which hollow cylindrical structures were produced using a laboratory-scale 3D printer.
The developed methodology was further used to conduct an in-depth investigation into the influence of aggregates on the structural build-up of ordinary concrete. In the experimental program, the binder composition was kept constant while the aggregate was varied in terms of the volume fraction and the surface area (per unit volume of concrete); the main focus was put on compositions with elevated aggregate content (45−55 % by volume). A mechanism lying behind the effects of the aggregate properties on the structural build-up of concrete was discovered by studying the structure of constitutive paste in concrete. Aggregate-induced inhomogeneity of constitutive paste allowed to introduce a three-component model of fresh concrete. Furthermore, to find models capable of predicting the parameters of structural build-up of concrete, i.e. static yield stress and structuration rate, concrete was viewed as a suspension of aggregate particles in suspending medium. Three approaches were employed to define the correspondent components. Suspending medium was represented by plain cement paste, screened cement paste and fine mortar considered as a part of concrete comprising particles below 0.5 mm; a substantiation for such a definition was provided. Applicability and limitations of the models based on all three approaches were compared. The modelling approach was further extended to printable concretes with nearly identical aggregate compositions, but different properties of paste. Opportunities and challenges in modelling the structural build-up of printable concrete, including the problem of material dependency of the models and the relevancy of fitting coefficients, were discussed. A modified Chateau-Ovarlez-Trung model based on the definition of suspending medium as fine mortar was acknowledged as best suited to describe the structural build-up of both ordinary and printable concrete.
|
32 |
Scanning Methods as Monitoring, Verification, and Accounting tools for CO₂ Sequestration in Unconventional Gas ReservoirsAmante, Joseph David 16 September 2015 (has links)
Unconventional gas reservoirs in carbon dioxide sequestration activities is a relatively new and unexplored concept currently undergoing pilot scale testing. Sequestration has the potential for enhancing gas recovery while mitigating carbon dioxide to long term storage structures. Due to the extremely complex systems associated with these unconventional reservoirs, modeling becomes difficult to predict accurately. This thesis presents methods to increase the confidence of inferred parameter testing for unconventional reservoir sequestration in both seam coal bed methane wells and a shale wells. Various tests include the use of computed tomography coupled with Avizo modeling software, inductively coupled mass spectrometer fluid transport analysis, pressure transient build tests, liquid level detection, and desorption analysis coupled with cleat image analysis. Analyses of coals performed by both environmental scanning electron microscope (ESEM) and micro CT demonstrate that distributions of cleat porosity in coals are anisotropic and not correlated to the seam depth or location. ESEM is used with micro CT scanning to verify the results before and after the impregnation of the carbonic acid. The micro CT data in Avizo Fire© was used calculate an increase in cleat permeability by 25%. The increase of major flow pathways is caused by the dissolution of carbonates. Changes in the structures were observed qualitatively through ESEM and micro CT and quantitatively through Avizo and inductively coupled mass spectrometry. The results of comparative study between the cleat structures and the desorption of various seams indicate a trend in the cleat porosity and the desorption rate of the coals as well as the cleat porosity and the total gas in various seams. / Master of Science
|
33 |
Vývoj městské zástavby a městské infrastruktury v Benešově v letech 1918-1939 / The developement of urban build-up area and urban infrastructure in Benešov in the years 1918-1939Roubík, Michal January 2011 (has links)
In my diploma thesis "The Development of Urban Build-up Area and Urban Infrastructure in Benešov in the Years 1918 - 1939", I explore one chapter in the development of a small agricultural town during the era of the First Czechoslovak Republic. This thesis is a contribution to the history of Czech towns during the interwar period and its topic corresponds to the research project of the Institute of Economic and Social History at the Faculty of Arts, Charles University in Prague, within the frame of which I worked on this thesis. The thesis was written mainly based on research of the resources in the State District Archives in Benešov (a branch office of the State Regional Archives in Prague) and of a wide range of relevant specialized literature. The introduction consists of a chapter offering a complex summary of the most important moments and changes in the development of Benešov during the examined period. Apart from the history of Benešov, it also shows the role of the town in the region and the relation of its development to other municipalities in the country. The focal point of the thesis lays in the extensive yet lucid chapters examining architectural development of the town (the essential moments, context, but also particular interesting buildings) and the development of its infrastructure...
|
34 |
Caractérisation et modélisation du comportement mécanique et de la tenue en fatigue d'un composite thermoplastique à fibres de carbone courtes pour applications aéronautiques / Characterization of the mechanical behavior and the fatigue lifetime of a short carbon fibers reinforced composite for aeronautical applicationsLeveuf, Louis 07 December 2017 (has links)
Cette étude présente la caractérisation du comportement mécanique et la tenue en fatigue d’un composite thermoplastique à matrice PEEK renforcée en fibres de carbone courtes pour des applications aéronautiques. La première partie présente la description des matériaux étudiés ainsi que la mise en place d’un protocole de caractérisation de la microstructure. Il est alors mis en avant la nécessité de générer des éprouvettes de caractérisation simples en introduisant le concept d’éprouvettes amincies. Dans un second temps, la méthode d’auto-échauffement en régime transitoire est appliquée en concluant sur l’influence de différents paramètres sur le bilan énergétique tels que la microstructure ou le grade du matériau étudié. La troisième partie présente l’établissement d’une loi de comportement phénoménologique avec une prise en compte locale de l’anisotropie par des approches micromécaniques classiques. Les simulations mécanique et énergétique donnent des résultats corrélant très bien avec l’expérimentale pour une distribution d’orientation proche de 0° et des résultats moins convaincants pour une distribution d’orientation proche de 90°. La dernière partie présente l’utilisation d’un protocole de caractérisation rapide basé sur les essais d’auto-échauffement. Cette approche, validée pour les différents matériaux étudiés, permet de prédire la courbe d’endurance en fatigue déterministe avec une seule éprouvette et en une demi-journée d’essais. Il est également mis en évidence qu’un critère énergétique à deux paramètres est indépendant de la distribution d’orientation, et qu’il est possible de discriminer rapidement en fatigue les différents matériaux étudiés. / This study deals with characterization of the mechanical behavior and the fatigue lifetime of a short carbon fibers reinforced PEEKmatrix thermoplastic composite. The first part presents the description of the materials studied and the implementation of the characterization of the microstructure. It’s then emphasized the need to generate simple characterization samples by introducing the concept of thin specimens. In a second step, the heat build-up protocol is applied on the studied materials. It is then highligthed the influence on the energetic assessment of various parameters as the microstructure or the choice of material. The third part presents the etablishment of a phenomenological law of behavior with a local consideration of anisotropy using conventional micromechanical approaches. The mechanical and energetic simulations give resultats correlating very well with the experimental ones for a distribution of orientation close to 0°. The last part presents the use of the heat build-up technique to predict the fatigue lifetime. This approach uses an energetic criterion with two parameters and is able to predict the deterministic fatigue curve with one sample, in half a day. It is then shown the capability to catch the influence of the variations of matrix grade and fibers content on the fatigue properties and validates the use of the technique for fastmaterials screening.
|
35 |
Časový vývoj reologických parametrů strusky aktivované různými aktivátory / Time evolution of rheological parameters of slag activated with various activatorsPazour, Miroslav January 2021 (has links)
Tato diplomová práce se zabývá aktuálními poznatky, společně s optimalizací oscilačních měření pomocí hybridního reometru, ale hlavně pozorováním změn reologických parametrů v čase past mleté granulované vysokopecní strusky aktivované různými aktivačními roztoky s koncentrací alkálií M: 4 and 7.5 moldm. Výsledky byly pro diskuzi podpořeny výstupy z Vicatovy metody a izotermické kalorimetrie. Nejprve bylo zjištěno, že limit lineární viskoelastické oblasti se zmenšuje v čase. Dále bylo pozorováno, že v time sweep testech vykazovala struska aktivovaná křemičitany nejnižší hodnoty komplexního modulu a struska aktivovaná hydroxidy o koncentraci 4 moldm nejvyšší hodnoty a ostatní pasty vykazovaly hodnoty mezi těmito dvěma extrémy a měly mezi sebou porovnatelné hodnoty. Podobný trend byl pozorován u vývoje kritické meze oscilačního napětí, získaného z amplitude sweep testů (přerušovaně a nepřerušovaně). Oba výše zmíněné parametry, komplexní modul a mez napětí, se vyvíjely v čase. Výsledky všech testů jasně ukázaly, že povrchová chemie hraje roli ve výsledném reologickém chování. Odsud, povaha a koncentrace aktivátoru ovlivňují reologické vlastnosti skrze efekty Na a K iontů, stejně tak skrze koncentraci, která má dopad na elektickou dvojnou vrstvu. Reologické chování může být také ovlivněno dalšími faktory, např. viskozitou aktivačního roztoku a celkovou kinetikou hydratačního procesu.
|
36 |
Source Apportionment and Risk Assessment of Urban Diffuse Pollutants of Heavy Metals and Polycyclic Aromatic Hydrocarbons on Urban WatershedZhang, Jin 15 March 2019 (has links)
In this Dissertation, systematic work has been carried out to study the road-deposited sediment and its adsorbed pollutants from a stormwater pollution perspective. Solid-phase concentration, surface load, source apportionment, risk assessment, and desorption dynamics of polycyclic aromatic hydrocarbons and/or heavy metals in road-deposited sediments (RDS) were investigated. In order to provide data to assist potential strategies of stormwater pollution mitigation and integrated catchment management to minimise the adverse impacts of RDS adsorbed pollutants on stormwawter quality, the following specific topics were addressed.
⑴ The influences of traffic load and antecedent dry-weather period on pollution level and ecological risk of heavy metals in RDS were analyzed.
⑵ The build-up dynamics and chemical fractionation of metals were determined.
⑶ The potential source contributions and risk assessment of polycyclic aromatic hydrocarbons in size-fractionated RDS were firstly determined by a Principal component analysis - Multiple linear regression receptor model.
⑷ The qualitative and quantitative source apportionments of polycyclic aromatic hydrocarbons were subsequently investigated through a combined qualitative Molecular Diagnostic Ratio and quantitative Positive Matrix Factorization source apportionment with an extended data set.
⑸ The exposure risk of polycyclic aromatic hydrocarbons were evaluated and calculated by incremental lifetime cancer risk models.
⑹ Then, a novel ecological risk assessment approach to the RDS adsorbed toxic substances was developed, which was explored exclusively for the study of RDS for a water pollution aspect.
⑺ Finally, the effects of rainwater, major wastewater constituents of dissolved organic matter and surfactant on the leaching of heavy metals from RDS were carried out.
|
37 |
A Data-Driven Approach For Evaluating Defensive Behavior During the Build-Up Phase in Football / En datadriven strategi för att utvärdera försvarsspeleti uppbyggnadsfasen inom fotbollMarkou, Dimitrios January 2024 (has links)
In the popular sport of football, the exploration of key performance indicators has garnered significant interest among researchers, coaches, and analysts. While machine learning approaches, such as the expected goals model, have provided valuable insights into the attacking aspects of the game, the defensive side has received comparatively less attention. This thesis focuses on the defensive aspect of football, particularly during the opposition’s build-up phase, a strategy increasingly adopted by many teams. The goal of this project is to integrate valuable features from existing research with newly generated ones, developed in consultation with football experts, to create a model that provides insights into a team’s defensive behavior during the opponent’s build-up phase. The study utilizes synchronized event and tracking data from the Allsvenskan 2022 and 2023 seasons. An algorithm is developed to filter and analyze build-up sequences by generating appropriate defensive features. Subsequently, a logistic regression-based machine learning model is implemented to predict the outcome of an event during a build-up sequence, as well as the overall outcome of the sequence. This approach, enables the introduction of two new metrics aimed at evaluating a team’s defensive behavior during the opponent’s build-up phase. Additionally, a web-based application is developed to visualize and communicate the project results and insights to football experts and data analysts. Finally, the findings of this thesis highlight the benefits of combining tracking data with event data in football analytics. / Nyckeltalsundersökningar för att utvärdera och utveckla fotbollsklubbars prestation har väckt stort intresse bland forskare, tränare och analytiker. Traditionellt sett har dessa nyckeltal härletts genom observationsanalys. Dock har den ökande förekomsten av teknik inom den professionella fotbollsvärlden skapat möjligheter för att implementera mer automatiserade metoder för taktisk analys. Denna studie kommer specifikt att fördjupa sig inom det taktiska området av fotboll, som framstår som den mest relevanta och dynamiska delen av spelet. Målet med studien är att applicera modern teknologi, så som maskininlärning, på befintlig forskning, för att utveckla en modell som ger insikter om försvarsspelet under motståndarens uppbyggnadsfas. Studien undersöker synkroniserad händelse- och spårningsdata från Allsvenskan, Sveriges Högsta fotbollsserie, säsongerna 2022 och 2023. Efter att ha utvecklat en algoritm för att filtrera uppbyggnadssekvenser, användes denna data för att generera omfattande egenskaper som beskriver kvaliteten på ett lags försvarsspel. Därefter implementeras en maskininlärningsmodell, med hjälp av logistisk regressionsanalys, för att förutse utfallet av både en uppbyggnadssekvens och försvarsspelet. Resultatet visar på värdet av att kombinera spårningsdata med händelsedata inom fotbollsanalys. Modellens prestanda förbättrades avsevärt, både när det gäller att förutsäga utfallet av ett defensivt spel och en uppbyggnadssekvens.Dessutom har resultatet av studien lett till användbara insikter om försvarsspel för dataanalytiker inom fotboll. En webbaserad applikation utvecklades också för att visualisera och kommunicera resultaten.
|
38 |
Use of raw Martian and Lunar soils for surface-based reactor shieldingChristian, Jose L. 1963- 13 October 2014 (has links)
For several decades, the idea of flying and landing a less-than-man-rated nuclear reactor for planetary surface applications has been considered. This approach promises significant mass savings and therefore reduction in launch cost. To compensate for the lack of shielding, it has been suggested the use of in-situ materials for providing radiation protection. This would take the form of either raw dirt walls or processed soil materials into blocks or tile elements. As a first step in determining the suitability of this approach, it is necessary to understand the neutron activation characteristics of these soils. A simple assessment of these activation characteristics was conducted for both Martian and Lunar soils using ORIGEN2.2. An average composition for these soils was assumed. As a baseline material, commonly used NBS-03 concrete was compared against the soils. Preliminary results indicate that over 2.5 times more gamma-radiation production of these soils vs. concrete took place during the irradiation phase (a baseline of 2.4 x 1011 neutrons/sec-cm2 was assumed). This was due primarily to radiative capture on Na23 and Mn55 and subsequent decay of their activation products. This is does not necessarily disqualify these materials as potential shielding material since the -radiation output was only in the order of 4.2 x 108 photons/cm3-sec. Furthermore, these soils did not show any significant activity after shutdown of the neutron source (the reactor), since all activation products had very short half lives. Their performance in this area was comparable to that of NBS-03 concrete. / text
|
39 |
Předpokládaná hodnota a cena veřejné stavební zakázky / The estimated value and the price of public structural worksŠíma, Zbyněk January 2016 (has links)
In this diploma thesis it is solved issue of determining the estimated value by public authority of works contract and determining price in the pre-investment phase of build-up. The work is based on a questionnaire survey, which is supplemented by practical examples of finished works contract.
|
40 |
Brownfieldy v ČR v návaznosti na historické centrum / Brownfields in the Czech Republic in connection with historical centersMurárová, Lucia January 2019 (has links)
The subject of the Diploma thesis is an urban study in the area of the former part of Tepna in Náchod. The Tepna area is largely after demolition and is currently dilapidating. This area has the potential for development and use, located within a short walking distance from the historic city center and at the same time from the residential area in the northern part of Náchod. Above the solved area is the castle, which is a dominant and a city landmark. The aim of the proposal was to use the potential of the territory at most, but at the same time to approach the surrounding landscape sensitively and to connect the urban character of the surrounding urban structure of the city and, conversely, the existing buildings of unclosed blocks are supplemented by new development.
|
Page generated in 0.0464 seconds