No description available.

Thesis (M.S.)--University of Wisconsin--Madison, 1966. / eContent provider-neutral record in process. Description based on print version record.

Made available in DSpace on 2014-10-09T12:27:57Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:00:54Z (GMT). No. of bitstreams: 0 / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:27:57Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:00:54Z (GMT). No. of bitstreams: 0 / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

<p>In today’s industrial world, there are high demands on the environmental aspects.</p><p>Siemens Industrial Turbomachinery AB (SIT AB) is a company that is keen about the environment, and therefore spends a lot of effort in developing combustion processes in order to reduce NOx (nitrogen oxides) emissions on their engine products. They are also researching in optional fuels, which are more environment-friendly.</p><p>In order to provide lower emissions the SIT designed a water rig to study the flow dynamics in a DLE (Dry Low Emission) burner.</p><p>An analyze program (GUI horizontal) was developed with new functions and the existing functions were improved. The program’s function was to evaluate different experimental tests of the flow dynamics in the 3rd generation DLE burners, of the SGT-800 gas turbine engine.</p><p>The aim was to ensure repeatability to enhance reliability, of the experimental test results for further comparison, for upcoming projects concerning future DLE burners.</p><p>When repeatability was achieved, implementations of different geometrical modifications were performed in the 3rd generation DLE burner.</p><p>The reason of the geometrical alterations was to look over if better fuel air mixture could be obtained and accordingly (thus) to reduce hotspots in the burner and in that case reduce NOx emissions.</p>

Thesis (M. Sc.)--University of Hong Kong, 1982.

In today’s industrial world, there are high demands on the environmental aspects. Siemens Industrial Turbomachinery AB (SIT AB) is a company that is keen about the environment, and therefore spends a lot of effort in developing combustion processes in order to reduce NOx (nitrogen oxides) emissions on their engine products. They are also researching in optional fuels, which are more environment-friendly. In order to provide lower emissions the SIT designed a water rig to study the flow dynamics in a DLE (Dry Low Emission) burner. An analyze program (GUI horizontal) was developed with new functions and the existing functions were improved. The program’s function was to evaluate different experimental tests of the flow dynamics in the 3rd generation DLE burners, of the SGT-800 gas turbine engine. The aim was to ensure repeatability to enhance reliability, of the experimental test results for further comparison, for upcoming projects concerning future DLE burners. When repeatability was achieved, implementations of different geometrical modifications were performed in the 3rd generation DLE burner. The reason of the geometrical alterations was to look over if better fuel air mixture could be obtained and accordingly (thus) to reduce hotspots in the burner and in that case reduce NOx emissions.

A ítria vem sendo muito utilizada como material luminescente e estrutural resistente a altas temperaturas, devido às suas excelentes características ópticas e refratárias. No processamento coloidal da ítria, o controle da estabilidade da suspensão consiste em uma importante etapa quando se objetiva produzir componentes reprodutivos, com densidade controlada, microestrutura homogênea e estabilidade estrutural. Desta maneira, os estudos envolvendo o comportamento de superfície, as condições de estabilidade das suspensões e o comportamento frente às condições de conformação (fluxo), fornecem importantes subsídios para controle dos processos na fabricação de componentes cerâmicos para queimadores de gás. Neste sentido, realizaram-se estudos sobre o comportamento de superfície, de estabilidade e reológico de suspensões aquosas de ítria e do concentrado de terras raras contendo ítria a fim de adequá-las para o processo de conformação por impregnação, onde foram testados diferentes materiais orgânicos como matrizes de réplica, para a confecção de membranas porosas para queimadores de gás. Neste estudo foram avaliados os parâmetros como: pH do meio, concentrações de dispersante, sólidos e ligante na estabilidade e no comportamento ao fluxo das suspensões cerâmicas, e também os aspectos dos distintos materiais orgânicos selecionados como matrizes de réplica para impregnação com as suspensões cerâmicas otimizadas. Os resultados obtidos indicam que se pode confeccionar membranas cerâmicas porosas pelo método de réplica a partir das suspensões aquosas de ítria e do concentrado de terras raras contendo ítria, utilizando-se pH alcalino, polieletrólito aniônico e uma tela mista de nylon-algodão como matriz de réplica. / Yttria has been used very much as luminescent and high temperature material due to its excellent optical and refractory characteristics. In yttria colloidal processing, the control of the stability of suspension is an important step in the fabrication of reproducible products with controlled density, homogeneous microstructure and structural stability. So, the studies concerning surface behavior, stability conditions of the suspensions and the behavior under conformation conditions (flow), give important information for the control of fabrication process of ceramic components for gas burners. In this way, studies concerning surface behavior, stability and rheology of aqueous suspensions of yttria and rare earth concentrate containing yttria were carried out, in order to adequate them for impregnation method, where different organic materials were tested as replica matrix to fabricate porous membranes for gas burners. In this study, the effect of some parameters as pH and concentrations of dispersant, solids and binder on stability and flow behavior of ceramic suspensions were evaluated, and also, different kinds of organic materials selected as replica matrix for impregnation method using optimized ceramic suspensions. The results show that porous ceramics membranes can be produced by replica using yttria and rare earth concentrate containing yttria, using alkaline pH, anionic polyelectrolyte and a nylon-cotton cloth as replica matrix.

A ítria vem sendo muito utilizada como material luminescente e estrutural resistente a altas temperaturas, devido às suas excelentes características ópticas e refratárias. No processamento coloidal da ítria, o controle da estabilidade da suspensão consiste em uma importante etapa quando se objetiva produzir componentes reprodutivos, com densidade controlada, microestrutura homogênea e estabilidade estrutural. Desta maneira, os estudos envolvendo o comportamento de superfície, as condições de estabilidade das suspensões e o comportamento frente às condições de conformação (fluxo), fornecem importantes subsídios para controle dos processos na fabricação de componentes cerâmicos para queimadores de gás. Neste sentido, realizaram-se estudos sobre o comportamento de superfície, de estabilidade e reológico de suspensões aquosas de ítria e do concentrado de terras raras contendo ítria a fim de adequá-las para o processo de conformação por impregnação, onde foram testados diferentes materiais orgânicos como matrizes de réplica, para a confecção de membranas porosas para queimadores de gás. Neste estudo foram avaliados os parâmetros como: pH do meio, concentrações de dispersante, sólidos e ligante na estabilidade e no comportamento ao fluxo das suspensões cerâmicas, e também os aspectos dos distintos materiais orgânicos selecionados como matrizes de réplica para impregnação com as suspensões cerâmicas otimizadas. Os resultados obtidos indicam que se pode confeccionar membranas cerâmicas porosas pelo método de réplica a partir das suspensões aquosas de ítria e do concentrado de terras raras contendo ítria, utilizando-se pH alcalino, polieletrólito aniônico e uma tela mista de nylon-algodão como matriz de réplica. / Yttria has been used very much as luminescent and high temperature material due to its excellent optical and refractory characteristics. In yttria colloidal processing, the control of the stability of suspension is an important step in the fabrication of reproducible products with controlled density, homogeneous microstructure and structural stability. So, the studies concerning surface behavior, stability conditions of the suspensions and the behavior under conformation conditions (flow), give important information for the control of fabrication process of ceramic components for gas burners. In this way, studies concerning surface behavior, stability and rheology of aqueous suspensions of yttria and rare earth concentrate containing yttria were carried out, in order to adequate them for impregnation method, where different organic materials were tested as replica matrix to fabricate porous membranes for gas burners. In this study, the effect of some parameters as pH and concentrations of dispersant, solids and binder on stability and flow behavior of ceramic suspensions were evaluated, and also, different kinds of organic materials selected as replica matrix for impregnation method using optimized ceramic suspensions. The results show that porous ceramics membranes can be produced by replica using yttria and rare earth concentrate containing yttria, using alkaline pH, anionic polyelectrolyte and a nylon-cotton cloth as replica matrix.

Industry is heavily dependent on the process of combustion and with a projected rapid increase for the demand of combustion-derived energy it is imperative to expose a new age of engineering professionals to the discipline of combustion engineering. One purpose of this study was to modify an existing scaled-down industrial furnace and to retrofit it with the ability to interchange burners for academic application and combustion testing. A number of available industrial burners are presented and their qualities and drawbacks discussed. The modification of an existing scaled-down industrial tunnel furnace is proposed in this work with the objective of providing users with exposure to the control and safe operating strategies associated with industrial combustion. The furnace system simulates a square-shaped tunnel geometry commonly found in industrial applications. A single nozzle mix burner is mounted along the furnace axis and operated with supporting equipment such as a burner control safeguard, a gas train, and an air supply. Details of the furnace are provided in this work. The concept of radiative heat transfer within a combustion enclosure is demonstrated through furnace simulation with Hottel’s Zone Method. / Thesis (Master, Chemical Engineering) -- Queen's University, 2010-07-19 09:50:22.797