Spelling suggestions: "subject:"japon""
1 |
Determining the recording time of digital media by using the electric network frequencyKantardjiev, Alex January 2011 (has links)
Authentication of recordings is an important task in forensic sciences. When processing audio or video material, some tasks might be related to determining whether or not the material has been edited or falsified in any way, or in other cases, to determine at what point in time a recording was made. The transition from analog to digital media has provided a solid foundation for the process of determining recording times by using the frequency variations in the electrical network, when interferences from the network are present in the investigated recording. This thesis describes a method of how to record the frequency of the electrical network in order to establish a reference database, evaluates several methods to isolate and extract the disturbances from recordings as well as suggests methods of how to search the database in order to locate the time of a recording. It is concluded, that each of the methods suggested has both advantages and disadvantages, depending on the state of the examined recording. Tests are also conducted in order to determine, whether or not, battery powered recording equipment is susceptible to recording the disturbances, or harmonics thereof, from electromagnetic fields near conducting wire or other electrical equipment. It is found that the fundamental frequency disturbance is usually difficult to detect, but also, that it is not uncommon that harmonics can be present in the recordings from the battery powered devices tested. Included in this thesis are also the results of the development of a graphical user interface for Matlab, where some of the features include the possibility to filter sound files, estimate frequency patterns and perform database searches, as well as the evaluation of a frequency analysis software. Both intended to serve as an aid for locating and extracting the disturbances of interest, as well as for finding the corresponding frequency patterns in the established database.
|
2 |
"Let me tell you why God made ..." death a philosophical development and critique of Capon's scientific and theological line of argument against sin as the cause of biological death /Kowalsky, Nathan Edward. January 2002 (has links)
Thesis (M.C.S.)--Regent College, Vancouver, B.C., 2002. / Abstract and vita. Includes bibliographical references (leaves 169-176).
|
3 |
"Let me tell you why God made ..." death a philosophical development and critique of Capon's scientific and theological line of argument against sin as the cause of biological death /Kowalsky, Nathan Edward. January 2002 (has links) (PDF)
Thesis (M.C.S.)--Regent College, Vancouver, B.C., 2002. / Abstract and vita. Includes bibliographical references (leaves 169-176).
|
4 |
"Let me tell you why God made ..." death a philosophical development and critique of Capon's scientific and theological line of argument against sin as the cause of biological death /Kowalsky, Nathan Edward. January 2002 (has links)
Thesis (M.C.S.)--Regent College, Vancouver, B.C., 2002. / Abstract and vita. Includes bibliographical references (leaves 169-176).
|
5 |
Blind Adaptive MIMO-CDMA Receiver with Constant Modulus Criterion in Multipath ChannelsChao, Po-sun 23 July 2008 (has links)
In recent years, demands on all kinds of wireless communications become heavier due to the developments of new services and devices. At the same time, future wireless networks are expected to provide services with high quality and data rate. A possible solution which can attain these objectives is wireless communication systems that use multiple-input multiple-output (MIMO) antennas along with Alamouti¡¦s space-time block code and direct-sequence code division multiple access (DS-CDMA) modulation technique. In such systems, spatial diversity rendered by multiple antennas as well as coding in spatial and time domains are the keys to improve quality of transmission. Many multiuser detection techniques for the space-time block coded CDMA systems have been investigated. In [8], the blind Capon receiver was proposed, which consists of a two-branch filterbank followed by the blind Capon channel estimator. The design of blind Capon receiver is based on linearly constrained minimum variance (LCMV) criterion, which is known to be sensitive to inaccuracies in the acquisition or tracking of the desired user's timing, referred to as mismatch effect. In other words, the LCMV-based receiver may perform undesirably under mismatch effect.
In this thesis, we propose a new blind adaptive MIMO-CDMA receiver based on the linearly constrained constant modulus (LCCM) criterion. This work is motivated by the robustness of LCCM approach to the mismatch effect. To reduce the complexity of receiver design, framework of the generalized sidelobe canceller (GSC) associated with the recursive least squares (RLS) algorithm is adopted for implementing the adaptive LCCM MIMO-CDMA filterbank. Based on the GSC-RLS structure, we derive the proposed MIMO CM-GSC-RLS algorithm. For the purpose of comparison, an adaptive implementation of the blind Capon receiver proposed in [8] is also derived, which is referred to as the MIMO MV-GSC-RLS algorithm. We note that the signal model in [8] was constructed under assumption of frequency-flat channels. To obtain a more practical and realistic signal model, in this thesis we extend the system and channel model by including multipath effects in the beginning of our work. In completing this extension, inter-symbol interference (ISI) caused by the special coding scheme of ST-BC will be specifically analyzed. Finally, a full discussion of the multipath signal model will be provided, including necessity of truncating the received signals as well as modifications in the signal model when considering time-varying channels.
Via computer simulations, advantages of the proposed scheme will be verified. Compared to the conventional blind Capon receiver, we will show that the performance of the proposed CM-GSC-RLS algorithm is better. This is especially true when mismatch problem is considered in the MIMO-CDMA systems of interest. The proposed scheme show more robustness against the mismatch effects than the conventional blind Capon receiver. Moreover, the benefit resulted by truncating the received signals is also demonstrated, especially for binary phase-shift-keying (BPSK) modulated source symbol. Finally, simulations considering time-varying channels are provided to reveal that our proposed scheme can adapt itself to the time-varying environments appropriately.
|
6 |
Comparative Performance Analysis of the Algorithms for Detecting Periodically Expressed GenesAgyepong, Kwadwo 2012 August 1900 (has links)
Thus far, a plethora of analysis on genome-wide gene expression microarray experiments on the cell cycle have been reported. Time series data from these experiments include gene expression profiles that might be periodically expressed. However, the numbers and actual genes that are periodically expressed have not been reported with consistency, analysis on similar experiments reports disparate numbers of genes that are periodically expressed with scant overlap. This work ultimately compares the performance of five spectral estimation schemes in their ability to recover periodically expressed genes profiles. Lomb-Scargle (LS), Capon, Missing-Data Amplitude and Phase Estimation (MAPES), Real Value Iterative Adaptive Approach (RIAA) and Lomb-Scargle Periodogram Regression (LSPR) are rigorously studied and pitted against each other in various simulated testing conditions. Results obtained using synthetic and microarray data reveals that RIAA is an efficient and robust method for the detection of periodically expressed genes in short time series data that might be characterized with noisy and irregularly sampled data points.
|
7 |
EFFECTS OF NEONATAL 3,4-METHYLENEDIOXYMETHAMPHETAMINE ON HIPPOCAMPAL GENE EXPRESSION, SPATIAL LEARNING AND LONG-TERM POTENTIATIONSKELTON, MATTHEW RYAN 13 July 2006 (has links)
No description available.
|
8 |
Direction-of-Arrival Estimation in Spherically Isotropic NoiseDorosh, Anastasiia January 2013 (has links)
Today the multisensor array signal processing of noisy measurements has received much attention. The classical problem in array signal processing is determining the location of an energy-radiating source relative to the location of the array, in other words, direction-of-arrival (DOA) estimation. One is considering the signal estimation problem when together with the signal(s) of interest some noise and interfering signals are present. In this report a direction-of-arrival estimation system is described based on an antenna array for detecting arrival angles in azimuth plane of signals pitched by the antenna array. For this, the Multiple Signal Classication (MUSIC) algorithmis first of all considered. Studies show that in spite of its good reputation and popularity among researches, it has a certain limit of its performance. In this subspace-based method for DOA estimation of signal wavefronts, the term corresponding to additive noise is initially assumed spatially white. In our paper, we address the problem of DOA estimation of multiple target signals in a particular noise situation - in correlated spherically isotropic noise, which, in many practical cases, models a more real context than under the white noise assumption. The purpose of this work is to analyze the behaviour of the MUSIC algorithm and compare its performance with some other algorithms (such as the Capon and the Classical algorithms) and, uppermost, to explore the quality of the detected angles in terms of precision depending on different parameters, e.g. number of samples, noise variance, number of incoming signals. Some modifications of the algorithms are also done is order to increase their performance. Program MATLAB is used to conduct the studies. The simulation results on the considered antenna array system indicate that in complex conditions the algorithms in question (and first of all, the MUSIC algorithm) are unable to automatically detect and localize the DOA signals with high accuracy. Other algorithms andways for simplification the problem (for example, procedure of denoising) exist and may provide more precision but require more computation time.
|
Page generated in 0.0456 seconds