The subject of this diploma thesis is the design of exhibition gallery in the city center of Brno. The exhibition gallery consist of exhibition rooms, depositories, lecture hall, café, VIP room, entrance and communication spaces, hygienic facilities for visitors and employees, administrative premises of the gallery, air-conditioning and heating machinery. The SO01 object is processed in detail, the object SO02 is processed in the form of a study. Design of the exhibition gallery is based on the requirements of the student competition, the sponsor is Xella CZ, s.r.o. SO01 is designed as a four-storey building with three above-ground and one underground floors. The building has an exhibition area, a lecture hall, a café, a VIP room, entrance and communicative spaces, hygienic facilities for visitors and employees, air-conditioning machinery. The supporting structure of the building is designed as an assembled, prefabricated, reinforced concrete skeleton. Ceiling structures are designed as SPIROLL 250 mm pre-stressed ceiling panels. The facade is designed as two-layer ventilated. The exhibition gallery is designed with a single-layer flat vegetation roof.

Master´s thesis deals with the issue of internal microclimate of clean rooms. The experimental part focuses on aerosol and microbial microclimate. Different operating and intervention rooms were measured and then evaluated whether the cleanroom would comply with the standard cleanliness class even in normal operation after previous validations. The microbial examination of different clean spaces investigated the extent to which the exact passive fall method and its evaluation were time-dependent. From the data the correct desing of the air-conditioning system and its subsequent realization and regultion were verified. The theoretical part describes requirements for clean rooms according to SÚKL-LEK 17 and ČSN EN ISO 14644-1. In addition, a detailed methodology of the procedure of air-conditioning implementation is elaborated to the final validation and testing of clean rooms.

This master thesis focused on the design and elaboration of project documentation for the purpose of a storage area with an administrative building, consisting of the premises SO 01 - storage hall and SO 02 - administrative building. Objects are located on parcels no. 4006/16, 4006/17, 4006/18, 4006/19, 4006/23, 4006/24, 4006/26, 4006/27, 4006/28, 4006/29, 4006/30, 4006/31, 4006/32, in the cadastre unit Dolní Bojanovice. They are located on an investor's land. Traffic connection is provided by the exit from the car park on the local road. All engineering infrastructure engineering networks are located near the site. The design of the building respects the local zoning plan. Project documentation is prepared in accordance with the current wording of applicable laws, decrees and standards. The project solves the structure functionally divided into objects SO 01 and SO 02, which are both operationally and structurally connected. The construction of objects is statically independent. The object SO 01 is designed for the storage of building material intended for storage in dry rooms. In addition to the storage space there is the air-conditioning machine room. The SO 02 facility serves administrative and staffing facilities. In the basement of the building there are rooms of technical background and archives. The SO 01 is designed as a full-metal mounted object with a counter roof and foundation pads. The design system of the SO 01 object is columnar with steel columns. The SO 02 building is designed from a wall construction system made of aerated concrete blocks with reinforced concrete ceilings, base strips and a flat roof. The SO 01 has a 65.5x20.2 m ground plan. The perimeter shell of the building consists of assembled sandwich panels with a core of pure material. The largest ground plan dimensions of the so 02 are 26.75x10.35 m. The perimeter shell is made up of 375 mm piece concrete blocks with a 150 mm contact system.

This diploma thesis describes the design and elaboration of project documentation for realisation of construction of building of Guest house in municipality Ostravice. The building is situated on parcel 649/13 - arable land, in cadastral area Ostravice-1. Guest house is primarily intended for temporary accommodation of tourists in Beskydy mountains. The part of the building is restaurant as well as wellness centre with fitness gym. The building is situated in partially urbanised section of municipality. The access from the local road to parcel n. 470/20 to the main entrance into building will be enabled by newly purpose-built road with turnaround for passenger vehicles. The design respects the local plan and does not deviate from the character of the surrounding built-up area. The building has three above-ground floors and one underground floor, which is situated only under a part of the building. Project documentation is elaborated in conformity with effective laws, public notices and standards. Building of guesthouse is designed as wall system, with brick supporting walls made out of gas-silicate blocks and sand-lime bricks. The guest house is covered by two flat roofs with different inclination and with different height of ridges. The façade consists of stucco and for the third above-ground floor the façade is made out of ventilated larch-wood panelling. The building is placed in flat terrain.

The subject of my master´s thesis is a project of a new sports center in Havlíčkův Brod in Humpolecká street on plot no. 2709/3 and 2709/4. The land is sloping and its area is 14 849 square meters. The building has two overground floors and one underground floor. Vertical bearing constructions are designed from the monolitic ferroconcrete columns. Space between colmuns is made up of ceramic blocks. In the underground floor the space is made up of monolitic reinforced concrete. The vertical peripheral structures are provided with an insulation system with ventilated space. The horizontal bearing structures are designed as a monolitic reinforced concrete slabs. The roof is designed single – layer vegetation area. The roof over sports hall is sloping made up of wooden trusses. In south-eastern side of sports centre is designed restaurant with its technical background. In the underground floor there is relaxation part with swimming pool, saunas and massages. The rest of sports center is made up of technical and hygienic background for visitors and employees, and sports grounds, for example badminton courts, climbing wall, squash courts, fitness and 4 sports rooms.

The diploma thesis deals with construction and technological solution of Hotel Sachrův kopec in Harrachov. Part of the thesis is technical report of main object, study of realization main technological phases, technological prescriptions and inspection and test plans for steel-concrete ceiling construction, copper roof cover and Spiroll panel ceiling construction. Thesis contain project of work side facilities, main construction machinery, shedule of health and safety, environmental protection, coordination situation of transport routes, time and financial plan for construction, drawing of formwork for steel-concrete ceiling construction and drawing of Spiroll panel ceiling.

The subject of this diploma thesis is civil technical project of an administrative building in Brno. The work includes a technical report, a construction technology study, technological prescriptions, proposal of suitable machines and mechanisms required for construction and wider relationships of transport routes to construction site. It also includes control and test plans, a detailed timetable for the main building object, deployment plans for workers, major work machinery and mechanisms, an item budget and a construction site equipment project. Finally, there are drawings of boarding foundations and ceiling structures and a comparison of the two variants of the ceiling structures.

The aim of this diploma thesis is the construction and technological solution of the warehouse and administrative building in Černá za Bory. The diploma thesis contains technological procedures for assembly of reinforced concrete skeleton and realization of industrial floor. This work solves problems that could arise during the assembly of the skeleton and realization of industrial floor. The thesis contains a construction technology project, a study of the implementation of the main technological stages, the situation of the construction with broader relations of transport routes, the project of construction site equipment and the main design of machines and mechanisms. Furthermore, I created a variant solution of skeleton assembly including financial and time evaluation. Since the project documentation that was provided to me did not include any details for the skeleton placement, I decided to develop design details for the skeleton placement. Subsequently, I developed a plan for occupational safety and health. As a part of this work I made a comparison of industrial floors, both in terms of performance and economic. In order to find out the time demands, I prepared an exact timetable for the implementation of the main building. In order to ensure high safety and quality, I prepared a control and testing plan for the assembly of the skeleton and for the implementation of industrial flooring.

The subject of this diploma thesis is a proposal of the veterinary clinic in Pardubice. The object consists of 3 rectangles, where zverimex is connected to the veterinary clinic. Objects of the zverimex are veterinary clinic are designed as barrier-free. Object SO01 is partly solved as a two-storey, non-cellar. In the first part of the clinic there is a shop of zverimex with office and stock of rectangular shape. In the second part there is a reception for a veterinary clinic with a distinct entrance from where access is to of individual surgeries. In the inner part, there are offices of doctors, such as operating theaters, preparation rooms, CT, RTG, sono / endo / laparo, a laboratory connected with the infectious ward, a rehabilitation center and individual pet boxes. On the 2nd floor there are wardrobes and social facilities for the staff of the clinic with offices and day room, from where it is possible to enter the outdoor terrace. Hygienic facilities for visitors to the clinic are located in the entrance hall. For zverimex staff is designed at the back of the shop, the staff of the clinic is part of the closets in the 1st floor and 2nd floor. The construction system is a wall with a flat vegetation roof passing into the terraces on the terraces above the 1st NP, the roof above the entrance and over the 2nd NP, zverimex with the roof unobstructed. Ceiling structures are designed as pre-tensioned SPIROLL 320 mm ceiling panels. The exterior of the building of the clinic, which extends only to the 1st floor, is lined with red brick tiles and in the part of the building above which is the 2nd floor, the outside wall is lined with brick-gray cladding.

This diploma thesis deals with the proposal of a construction technological project of the tipping Plant in Vítkovice. The work consists of a technological report, transport routes proposal, study of the realization of the main technological stages, time and financial plan of all main objects, construction site project, design of main construction machines and mechanisms. The project also includes itemized budget of the main building structure together with a detailed timetable, financial plan and schedule deployment of construction machinery and workers. The content of this thesis also includes a technological project for the implementation of semi-assembled ceiling structures with a plan for securing material resources and a technological project for the execution of remediation works of concrete structural elements, for which an inspection and test plan with the description of inspection was prepared. The health and safety plan was also created from the perspective of the health and safety coordinator.