This thesis deals with a new building technical control station, office space and hotel. The building is situated on three floors, on the first floor we find technical inspection station and office premises manual technical lines. On the second floor there are offices. On the third there is a hotel. The building is designed by a rectangular shape with a flat roof and on the third floor there is a trafficable terrace. The supporting structure consists masonry Porotherm and reinforced concrete system columns, which is found only on the first floor. The supporting structure of tensioned ceiling consists of prestressed beams ceilings Spiroll a concrete slab. External surface finish on the first floor is made up of silicate plaster paste and the remaining two floors are made of ventilated facades. Utility room is located on the first floor, from where a chimney Schiedel is build. Most of the floor space in the building are made of a carpet or tiles, only in the service line is epoxy coating

The projected retirement home is located in the cadaster of the town Velká Bíteš. The building is designed with respect of resident's needs of retirement age. It is a four-storey building without basement. There are designed external doctor's offices on the first floor. There are lounge with library and technical facilities on the first floor as well. Besides that, we can find accomodation spaces from second up to fourth floor. The structural system is a longitudinal wall and ceilings are made by monolithic reinforced concrete. The roof is shed. The building is detached with built chambers

The object of this work is operational building of artificial lake, which is located in the cadastral area Loučky u Zátoru. The building is designed to provide the operation and safety of newly proposed water project. The building is detached, three floors and a partial basement, ground shape of a cross. The structural system is a brick, designed by the brick blocks HELUZ, based upon the strip foundation of plain concrete. Floors and stairs are made of reinforced concrete, gabled roof is covered up with concrete roofing BRAMAC.

Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.

En 1482, lorsque la construction du palazzo del Vaso s’achève sous le cardinal Giuliano della Rovere (1443-1513), l’édification d’imposants palais au cœur de la ville de Rome consiste en une pratique que se réservent, presque exclusivement, les Princes de l’Église. Manifestation ostensible du pouvoir, les riches et puissantes familles de la capitale ne tardent pas, dès le tournant du XVIe siècle, à s’approprier à leur tour cette prérogative dans le but de légitimer leur statut social. Certes, l’architecture extérieure du palais demeure, pour ces familles, un moyen efficace d’y parvenir, mais à plus forte raison, le décor intérieur – mobilier, frises, plafonds de bois peints, etc. – devient un dispositif didactique de prédilection qui permet au commanditaire d’articuler ses visions politiques à l’intérieur de programmes iconographiques savamment élaborés. Suivant cette perspective, ce mémoire souhaite interroger une composante du décor rarement examinée par la discipline de l’histoire de l’art : le plafond de bois peint. À cet effet, celui commandité par Marcantonio II Colonna (1535-1584) pour le salone du palazzo del Vaso (Colonna) de Rome fait ici office de cas d’étude. En tant que l’une des plus anciennes familles baronniales romaines, alliée des impériaux espagnols, la famille Colonna est ponctuellement impliquée, au cours de son histoire, dans des conflits qui l’opposent à la papauté, notamment à partir de 1557, année où Marcantonio II Colonna devient le chef de la famille. Ainsi, il s’agira d’abord de recenser les variantes structurelles et les modalités d’ornementation des plafonds de bois de la Renaissance pour identifier celui du salone. Puis, nous procéderons à une première interprétation iconographique de son programme peint afin de montrer de quelle manière cette composante décorative véhicule un message politique, directement lié aux enjeux du clan Colonna. / Under the order of Cardinal Giuliano della Rovere (1443-1513), the construction of Palazzo del Vaso was completed in 1482, a time when virtually all major palace constructions in the heart of Rome were restricted to the Princes of the Church. From the 16th century onwards, the leading wealthy families of the Italian capital appropriated this prerogative in order to legitimize their social status. The architecture of these palaces, as well as interior decoration such as furniture, friezes, painted wooden ceilings, etc., became symbols of status and power. Interior decoration also served as a didactic device that allowed the owner to articulate his political views within sophisticated iconographic programmes. From this perspective, the purpose of this thesis is to examine a décor component rarely addressed by art historians: the painted wooden ceiling. The ceiling commissioned by Marcantonio II Colonna (1535-1584) for the salone of the Palazzo del Vaso (Colonna) in Rome will serve as a case study. The Colonnas, traditionally pro-Spanish and one of the oldest Roman baronial families, were frequently involved in conflicts with the papacy, especially during the period when Marcantonio II Colonna was head of the household, from 1557. The structural variants and modalities of ornamentation specific to Renaissance wooden painted ceilings will be explored in order to form an in-depth analysis of the ceiling of the salone. Lastly, a first iconographic interpretation of its painted programme will be provided in order to demonstrate the conveyance of political messages directly linked to the stakes of the Colonna family.

This final thesis discuss about design, calculation and efficient choice of ceiling construction. The goal is to optimize the design of the building in order to minimize construction and operation costs, to meet the required purpose and to meet a certain quality standard. The effort to achieve this goal is based on the theory that a family house may not be designed in a single design system. In the practical part, three types of ceiling construction are designed for the selected RD. The result of the study is to determine the most appropriate option for a family house using value analysis and budget price.

The content of the diploma thesis is a building-technological project of the new building of residential buildings Rozhledna in Chrudim. The thesis contains technological regulations for a rough bottom structure and a rough top structure. Technological regulations are complemented by design of machine assembly, site facilities and control and test plans. Work safety, construction risk assessment, time schedule of main objects, object time and financial plan and budget of main buildings are also solved. An important part is the comparison of the parallel, gradual, current construction and the design of the thermal insulation system of the curtain wall.

The subject of my diploma thesis is the design of a new medical center MEDCEN in the area of the Jihlava hospital, on plot no. 4374/1. The total land area is 22 706 m2. The building has three aboveground and one underground floor. The vertical bearing structure consists of masonry ceramic elements, which are complemented by a monolithic, water-reinforced concrete in the underground floor. Vertical peripheral structures are equipped with thermal insulation system, in the above-ground floors with ventilated facade. The vertical load-bearing structures are made of prefabricated reinforced concrete panels and reinforced by reinforced concrete beams at the local load. The whole building is designed flat single-skin roof with a classic order of layers, where the main waterproofing layer consists of plasticized PVC foils. The layout of the building is divided into left and right wing, which connects the central central part. The entire underground floor is designed to be operational, there are parking spaces for employees, storage facilities and technical facilities of the building. Individual offices, nurses and waiting rooms are designed on all above-ground floors. In the central central part are designed sanitary rooms for visitors and employees. On the first floor is a pharmacy and X-ray examination room. On the third floor there are two office management offices and one-day surgery premises.

Constructive-technological project of sporting and relaxation centre in Všechovice includes technical report, study, mechanical assembly,technological prescriptions, inspection and test plan, principles governing the organization of construction, the economic balance ceilings, safety and risk work, calculation and construction budget, financial and schedule.

The project addresses the design documentation of a residential building. It is a detached house. The building has one basement and three floors. Residential house is a basement with a flat roof. The structural system consists of reinforced concrete columns and reinforced concrete ceiling. Perimeter and interior masonry infill masonry infill is composed of blocks YTONG. The roof is a single casing. The construction is based on the foundation footings and passports.