The dissertation is composed on theme OF THE SPORTS CENTRE KRUMLOV. In this three-storey building, there is the squash hall, table tennis, fitness hall, sauna for 6 persons and a café. In the garden that belongs to the building, there is projected a course for minigolf, playground for pétanque and tennis court. Constructional system is projected from lime-sand bricks, concrete beam ceilings and glued wooden beams. The roof is flat. External surface finish of the building is the ventilated facade.

This is a proposal of a detached building sports center with squash courts and a café. The building's basement, with two floors. Ground plan of the building is composed of two rectangles. The second floor is only over part of the building. Above the squash courts is a roof of wooden trusses and load-bearing part of the skeletal system consists of brick walls. The structural system of the building is brick system Porotherm, ceilings Spiroll. The building is covered single layer flat roof, and has a ventilated facade.

This thesis deals with newly built detached house of a mountain boarding house with a restaurants. The building is designed in the town of Loučná above Desna River in the Šumperk district, on plot No. 134 /21, 134/22 , 134/23 on the cadastral territory Kociánov . The built-up area of the site is 383 m2 . The mountain guest house has two floors, partial basement, and an attic. In the first ground floor, there is an entrance with a reception area, a restaurant with an entrance to the summer garden, guest toilet, kitchen, food and beverage storage rooms, changing rooms, and toilets combined with showers for employees. In the second floor, the guest rooms with private bathrooms, bed linen storage room, and the manager’s office are designed. In the basement, there is a utility room , workshop, ski and shoe depot rooms , a utility room , a storage for non- perishable food, and a garage. The building is based on the foundation walls of concrete C20/25, perimeter load-bearing walls in the basement are of BTB fittings, and other vertical supporting as well as the non-bearing structures are from Porotherm construction system. Ceilings are made of pre-bound concrete panels Goldback . The staircase is made of prefabricated stair parts. The roof is gabled with a construction of hambalek system at an inclination of 40 ° with a metal covering Lindab.

The main theme of this Master´s thesis is a project of detached residential house of a terraced type, partially located in terrain. The building has three floors and a basement and is covered by a flat roof. There are six residential units in the house and three parking spaces, including technical support. The house will be built in the village of Pribyslavice, on the plots with parcel numbers 140/1 and 145/1. The ground plan of the house is of a rectangular shape. The vertical load-bearing structural system is chosen to be made from bricks. Horizontal system is made by using Spiroll prestressed panels. The internal staircase is made from concrete, monolithic. The material and construction solutions is chosen to be close to passive standards. The project fully respects currently applicable standards and technical regulations of individual manufacturers.

The master’s thesis deals with optimization of cooling system of family house using borehole heat exchanger as a single cooling source. In the experimental part of the thesis was carried out long-term mearurements. The main part of the master’s thesis is the development and verification mathematical and physical model of thermal behavior chilled room. The result are computer simulations and evaluation of individual scenarios and design requirements for a potential optimization of measurement and control system. The theoretical part generally deals with radiant cooling systems.

This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.

MGS / Institute for Gender and Youth Studies / Institutions of higher learning are still masculine-orientated; this creates a barrier for women in terms of career advancement. To this effect women are under-represented in top academic positions. The study employed qualitative research methods to explore factors that contribute to the under-representation of women in senior positions at the University of Venda. A combination of purposive and convenience sampling was used to select twenty five female academics (25). Data was collected through primary and secondary data, semi-structured interviews were used to elicit and illuminate women’s voices on issues that affect them and a thematic analysis was used to analyse the collected data. The research findings demonstrate that the University’s environment continues to be masculine-oriented within most of employment categories as well as in academia where women struggle to thrive. Women face multiple challenges in ascending the academic ladder which results in the under-representation of women in management and academic levels. These challenges included: the stringent criteria for promotion which do not seem to accommodate women, especially mothers, lack of female role-models, mentors and networks. The second major barrier is the teaching work-load which poses difficulties for women, preparations for teaching took long hours leaving them with no time for family, research, publication, as well as to further their studies, which are necessary requirements for promotion. The third major barrier women are faced with is the challenge of balancing multiple roles - as students, workers and mothers. Balancing these multiple roles makes it difficult for women to meet the highly stringent promotion criteria in the University

The aim of the master’s thesis is the design of a new music club building in Valtice. The first part of the thesis is the architectural and structural design. The building of irregular rectangular shape with one underground floor and two above-ground floors is divided into two main operational units – a dance hall and a rock club. The chosen structural system is reinforced concrete columns with locally supported floors. The walls are made of sand-lime blocks. The main insulation material is hemp. The building is covered by a flat roof with extensive greenery. The second part deals with the building services. Ventilation, heating and cooling are provided by HVAC units. The heat source is condensing gas boilers, the cooling source is an outdoor VRV cooling unit. The third part of the master‘s thesis is the acoustic assessment of the building. As a noise source, it mainly addresses the acoustic impact on the surrounding buildings in the vicinity. Furthermore, it optimizes the reverberation time in the rock club. The project was produced in accordance with the legal regulations and technical standards and created in AutoCAD software.

In this diploma thesis is designed replica Hanacky estate from the 19th century. The whole structure includes not only a replica of the estate but also including the reconstruction of a barn or shelter. Hanacky estate will be part of Zoopark Vyškov and will serve as an environmental education center. Thesis I deal with a construction technological project. I focus here on the transport links, building-site cell site equipment, calculation of water and electricity, design tools and machinery, calculation, budget and schedule, the use of machines and workers, limitky. I deal with the technological regulations innovative technology. Furthermore, it is the control and test plans, security, ecology, design contract for work. In the last part of my thesis I deal with natural building materials.

Master thesis focuses on complex conducting of the technological project with accented earthwork, laying foundations and ceiling construction. Apartment building consists of two floors and is based in complicated geotechnical conditions which require changing subsoil and laying a foundation slab. The main aim of this thesis is a proposal of technological notes, time and financial management, selection of machinery, transport to the building site, work safety regulations, quality check of the conducted work and construction organisation.